Publications

Multiscale investigation of adsorption properties of novel 3D printed UTSA-16 structures. Grande, C. A., Blom, R., Middelkoop, V., Matras, D., Vamvakeros, A., Jacques, S. D. M., Beale, A. M., Di Michiel, M., Anne Andreassen, K. & Bouzga, A. M. Chemical Engineering Journal 402, 126166 (2020).
Phase selection in hypercooled alloys. Fopp, P., Kolbe, M., Kargl, F., Kobold, R., Hornfeck, W. & Buslaps, T. Journal of Alloys and Compounds 834, 154439 (2020).
Spatial dynamics of lithiation and lithium plating during high-rate operation of graphite electrodes. Finegan, D. P., Quinn, A., Wragg, D. S., Colclasure, A. M., Lu, X., Tan, C., Heenan, T. M. M., Jervis, R., Brett, D. J. L., Das, S., Gao, T., Cogswell, D. A., Bazant, M. Z., Di Michiel, M., Checchia, S., Shearing, P. R. & Smith, K. Energy & Environmental Science 13, 2570–2584 (2020).
Operando investigation of the lithium/sulfur battery system by coupled X-ray absorption tomography and X-ray diffraction computed tomography. Tonin, G., Vaughan, G. B. M., Bouchet, R., Alloin, F., Di Michiel, M. & Barchasz, C. Journal of Power Sources 468, 228287 (2020).
Real-time multi-length scale chemical tomography of fixed bed reactors during the oxidative coupling of methane reaction. Vamvakeros, A., Matras, D., Jacques, S. D. M., Michiel, M. di, Price, S. W. T., Senecal, P., Aran, M. A., Middelkoop, V., Stenning, G. B. G., Mosselmans, J. F. W., Ismagilov, I. Z. & Beale, A. M. Journal of Catalysis 386, 39–52 (2020).
Effects of Nanodomains on Local and Long-Range Phase Transitions in Perovskite-Type Eu_0.8Ca_0.2TiO_3–δ. Widenmeyer, M., Checchia, S., Xiao, X., Scavini, M. & Weidenkaff, A. Nanomaterials 10, 769 (2020).
Effect of the fabrication route on the phase and volume changes during the reaction heat treatment of Nb 3 Sn superconducting wires. Scheuerlein, C., Andrieux, J., Michels, M., Lackner, F., Meyer, C., Chiriac, R., Toche, F., Hagner, M. & Di Michiel, M. Superconductor Science and Technology 33, 034004 (2020).
Temperature evolution of the bulk nano-structure in a homologous series of room temperature ionic liquids. Pontoni, D., DiMichiel, M. & Deutsch, M. Journal of Molecular Liquids 300, 112280 (2020).
Wire-Based Additive Manufacturing of Ti-6Al-4V Using Electron Beam Technique. Pixner, F., Warchomicka, F., Peter, P., Steuwer, A., Colliander, M. H., Pederson, R. & Enzinger, N. Materials 13, 3310 (2020).
Exploring cycling induced crystallographic change in NMC with X-ray diffraction computed tomography. R. Daemi, S., Tan, C., Vamvakeros, A., M. Heenan, T. M., P. Finegan, D., Michiel, M. D., M. Beale, A., Cookson, J., Petrucco, E., S. Weaving, J., Jacques, S., Jervis, R., L. Brett, D. J. & R. Shearing, P. Physical Chemistry Chemical Physics (2020) doi:10.1039/D0CP01851A.
Electric-Field-Induced Phase Transformation and Frequency-Dependent Behavior of Bismuth Sodium Titanate–Barium Titanate. Lee, K.-Y., Shi, X., Kumar, N., Hoffman, M., Etter, M., Checchia, S., Winter, J., Lemos da Silva, L., Seifert, D. & Hinterstein, M. Materials 13, 1054 (2020).
In situ X-ray diffraction computed tomography studies examining the thermal and chemical stabilities of working Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3−δ membranes during oxidative coupling of methane. Matras, D., Vamvakeros, A., M. Jacques, S. D., Middelkoop, V., Vaughan, G., Aran, M. A., J. Cernik, R. & M. Beale, A. Physical Chemistry Chemical Physics (2020) doi:10.1039/D0CP02144J.
Functional surface layers in relaxor ferroelectrics. Kumar, N., Kong, S., Sharma, P., Shi, X., Vats, G., Checchia, S., Seidel, J., Hoffman, M. & Daniels, J. Journal of Materials Chemistry C 8, 7663–7671 (2020).
The electronic structure, surface properties, and in situ N₂O decomposition of mechanochemically synthesised LaMnO₃. H. Blackmore, R., Elena Rivas, M., F. Tierney, G., H. Mohammed, K. M., Decarolis, D., Hayama, S., Venturini, F., Held, G., Arrigo, R., Amboage, M., Hellier, P., Lynch, E., Amri, M., Casavola, M., Erden, T. E., Collier, P. & P. Wells, P. Physical Chemistry Chemical Physics (2020) doi:10.1039/D0CP00793E.
CuO/La0.5Sr0.5CoO3: precursor of efficient NO reduction catalyst studied by operando high energy X-ray diffraction under three-way catalytic conditions. Alxneit, I., Garbujo, A., Carollo, G., Ferri, D. & Glisenti, A. Physical Chemistry Chemical Physics (2020) doi:10.1039/D0CP01064B.
Domain wall-grain boundary interactions in polycrystalline Pb(Zr_0.7Ti_0.3)O₃ piezoceramics. Schultheiß, J., Checchia, S., Uršič, H., Frömling, T., Daniels, J. E., Malič, B., Rojac, T. & Koruza, J. Journal of the European Ceramic Society 40, 3965–3973 (2020).
MXene Tunable Lamellae Architectures for Supercapacitor Electrodes. Bayram, V., Ghidiu, M., Byun, J. J., Rawson, S. D., Yang, P., Mcdonald, S. A., Lindley, M., Fairclough, S., Haigh, S. J., Withers, P. J., Barsoum, M. W., Kinloch, I. A. & Barg, S. Acs Applied Energy Materials 3, 411–422 (2020). doi: https://doi.org/10.1021/acsaem.9b01654.
Pd-LaFeO3 Catalysts in Aqueous Ethanol: Pd Reduction, Leaching, and Structural Transformations in the Presence of a Base. Checchia, S., Mulligan, C. J., Emerich, H., Alxneit, I., Krumeich, F., Di Michiel, M., Thompson, P. B. J., Hii, K. K. M., Ferri, D. & Newton, M. A. ACS Catalysis , 3933–3944 (2020). doi: https://doi.org/10.1021/acscatal.9b04869..
Spatial quantification of dynamic inter and intra particle crystallographic heterogeneities within lithium ion electrodes. Finegan, D. P., Vamvakeros, A., Tan, C., Heenan, T. M. M., Daemi, S. R., Seitzman, N., Di Michiel, M., Jacques, S., Beale, A. M., Brett, D. J. L., Shearing, P. R. & Smith, K. Nature Communications 11, 631 (2020). doi: https://doi.org/10.1038/s41467-020-14467-x.
High Speed In Situ Synchrotron Observation of Cyclic Deformation and Phase Transformation of Superelastic Nitinol at Ultrasonic Frequency. Fitzka, M., Rennhofer, H., Catoor, D., Reiterer, M., Lichtenegger, H., Checchia, S., Di Michiel, M., Irrasch, D., Gruenewald, T. A. & Mayer, H. Experimental Mechanics 60, 317–328 (2020). doi: https://doi.org/10.1007/s11340-019-00562-8.
The nondestructive measurement of strain distributions in air plasma sprayed thermal barrier coatings as a function of depth from entire Debye-Scherrer rings. Li, C., Xiao, P. & Cernik, R. Journal of Applied Crystallography 53, (2020). doi: https://doi.org/10.1107/s1600576719016327.
ID15A at the ESRF a beamline for high speed operando X-ray diffraction, diffraction tomography and total scattering. Vaughan, G. B. M., Baker, R., Barret, R., Bonnefoy, J., Buslaps, T., Checchia, S., Duran, D., Fihman, F., Got, P., Kieffer, J., Kimber, S. A. J., Martel, K., Morawe, C., Mottin, D., Papillon, E., Petitdemange, S., Vamvakeros, A., Vieux, J.-P. & Di Michiel, M. Journal of Synchrotron Radiation 27, 515–528 (2020). doi: https://doi.org/10.1107/s1600577519016813.
The effect of grain size on the fatigue overload behaviour of nickel. Zhang, W., Simpson, C. A., Lopez-Crespo, P., Mokhtarishirazabad, M., Buslaps, T., Pippan, R. & Withers, P. J. Materials & Design 189, 108526–1-108526–8 (2020). doi: https://doi.org/10.1016/j.matdes.2020.108526.
4D imaging of lithium-batteries using correlative neutron and X-ray tomography with a virtual unrolling technique. Ziesche, R. F., Arlt, T., Finegan, D. P., T.M.M., H., Tengattini, A., Baum, D., Kardjilov, N., Markötter, H., Manke, I., Kockelmann, W., D.J.L., B. & Shearing, P. R. Nature Communications 11, 777–1-777–11 (2020). doi: https://doi.org/10.1038/s41467-019-13943-3.
Structural and electronic changes in graphite fluorides as a function of fluorination rate: An XRS, PDF and DFT study. Cavallari, C., Brunelli, M., Radescu, S., Dubois, M., Batisse, N., Vaughan, G. B. M., Fischer, H. & Pischedda, V. Carbon 147, 1 - 8 (2019). doi: https://doi.org/10.1016/j.carbon.2019.02.053.
Cultural and Natural Heritage at the ESRF: Looking Back and to the Future. Cotte, M., Autran, P.-O., Berruyer, C., Dejoie, C., Susini, J. & Tafforeau, P. Synchrotron Radiation News 32, 34–40 (2019). doi: https://doi.org/10.1080/08940886.2019.1680213.
Synchrotron pair distribution function analyses of ye'elimite-based pastes. Cuesta, A., Zea-Garcia, J. D., De la Torre, A. G., Santacruz, I. & Aranda, M. A. G. Advances in Cement Research 31, 138-146 (2019). doi: https://doi.org/10.1680/jadcr.18.00097.
Sustainable iron-based oxygen carriers for hydrogen production - Real-time operando investigation. De Vos, Y., Vamvakeros, A., Matras, D., Jacobs, M., der Voort P., V., Van Driessche, I., Jacques, S., Middelkoop, V. & Verberckmoes, A. International Journal of Greenhouse Gas Control 88, 393–402 (2019). doi: https://doi.org/10.1016/j.ijggc.2019.06.016.
Use of the advanced X-ray sources to accelerate the development of batteries and fuel cells for mobile applications. 32nd Electric Vehicle Symposium (EVS32) -, Drnec, J., Di Michiel, M. & Rack, A., in 1–7. (2019).
In-depth study of the mechanism of heavy metal trapping on the surface of hydroxyapatite. Ferri, M., Campisi, S., Scavini, M., Evangelisti, C., Carniti, P. & Gervasini, A. Applied Surface Science 475, 397–409 (2019). doi: https://doi.org/10.1016/j.apsusc.2018.12.264.
Spatially Resolving Lithiation in Silicon-Graphite Composite Electrodes via in Situ High-Energy X-ray Diffraction Computed Tomography. Finegan, D. P., Vamvakeros, A., Cao, L., Tan, C., Heenan, T. M. M., Daemi, S. R., Jacques, S. D. M., Beale, A. M., Smith, M. K., Brett, D. J. L., Shearing, P. R. & Ban, C. Nano Letters 19, 3811–3820 (2019). doi: https://doi.org/10.1021/acs.nanolett.9b00955.
Nano-scale oxide formation inside electrochemically-formed Pt blisters at a solid electrolyte interface. Keller, T. F., Volkov, S., Navickas, E., Kulkarni, S., Vonk, V., Fleig, J. & Stierle, A. Solid State Ionics 330, 17–23 (2019). doi: https://doi.org/10.1016/j.ssi.2018.11.009.
Defect-Driven Structural Distortions at the Surface of Relaxor Ferroelectrics. Kong, S., Kumar, N., Checchia, S., Cazorla, C. & Daniels, J. Advanced Functional Materials 29, 1900344 (2019). doi: https://doi.org/10.1002/adfm.201900344.
Local Structural Distortions and Failure of the Surface-Stress CoreShell Model in Brookite Titania Nanorods. Krayzman, V., Cockayne, E., Johnston-Peck, A. C., Vaughan, G. B. M., Zhang, F., Allen, A. J., Kunz, L. Y., Cargnello, M., Friedman, L. H. & Levin, I. Chemistry of Materials , (2019). doi: https://doi.org/10.1021/acs.chemmater.9b03762.
Deformation behaviour of lean duplex stainless steels with strain induced martensitic transformation: Role of deformation mechanisms, alloy chemistry and pre-deformation. Lechartier, A., Meyer, N., Estevez, R., Mantel, M., Martin, G., Parry, G., Véron, M. & Deschamps, A. Materialia 5, 100190–1-100190–12 (2019). doi: https://doi.org/10.1016/j.mtla.2018.100190.
Interfacial premelting of ice in nano composite materials. Li, H., Bier, M., Mars, J., Weiss, H., Dippel, A. C., Gutowski, O., Honkimäki, V. & Mezger, M. Physical Chemistry - Chemical Physics 21, 3734–3741 (2019). doi: https://doi.org/10.1039/c8cp05604h.
Design of next-generation ceramic fuel cells and real-time characterization with synchrotron X-ray diffraction computed tomography. Li, T., Heenan, T. M. M., Rabuni, M. F., Wang, B., Farandos, N. M., Kelsall, G. H., Matras, D., Tang, C., Lu, X. K., Jacques, S. D. M., Brett, D. J. L., Shearing, P. R., Di Michiel, M., Beale, A. M., Vamvakeros, A. & Li, K. Nature Communications 10, 1497 (2019). doi: https://doi.org/10.1038/s41467-019-09427-z.
Quantifying Reaction and Rate Heterogeneity in Battery Electrodes in 3D through Operando X-ray Diffraction Computed Tomography. Liu, H., Kazemiabnavi, S., Grenier, A., Vaughan, G. B. M., Polzin, M. B. J., Thornton, K., Chapman, K. W. & Chupas, P. J. ACS Applied Materials & Interfaces 11, 18386–18394 (2019). doi: https://doi.org/10.1021/acsami.9b02173.
In situ through-thickness analysis of crack tip fields with synchrotron X-ray diffraction. Lopez-Crespo, P., Peralta, J., Kelleher, J. & Withers, P. International Journal of Fatigue 127, 500–508 (2019). doi: https://doi.org/10.1016/j.ijfatigue.2019.06.029.
Isotope labeling reveals fast atomic and molecular exchange in mechanochemical milling reactions. Lukin, S., Tireli, M., Stolar, T., Barisic, D., Blanco, M. V., Di Michiel, M., Uzarevic, K. & Halasz, I. Journal of the American Chemical Society 141, 1212–1216 (2019). doi: https://doi.org/10.1021/jacs.8b12149.
On the origin of the anisotropic damage of X100 line pipe steel: Part I-In situ synchrotron tomography experiments. Madi, Y., Garcia, J. M., Proudhon, H., Shinohara, Y., Helfen, L., Besson, J. & Morgeneyer, T. F. Integrating Materials and Manufacturing Innovation 8, 570–596 (2019). doi: https://doi.org/10.1007/s40192-019-00165-0.
Revealing phase boundaries by weighted parametric structural refinement. Marlton, F., Checchia, S. & Daniels, J. Journal of Synchrotron Radiation 26, 1638–1643 (2019). doi: https://doi.org/10.1107/S1600577519007902.
Operando and Postreaction Diffraction Imaging of the LaSr/CaO Catalyst in the Oxidative Coupling of Methane Reaction. Matras, D., Jacques, S. D. M., Poulston, S., Grosjean, N., Bosch, C. E., Rollins, B., Wright, J., Di Michiel, M., Vamvakeros, A., Cernik, R. J. & Beale, A. M. The Journal of Physical Chemistry C 123, 1751–1760 (2019). doi: https://doi.org/10.1021/acs.jpcc.8b09018.
3D printed Ni/Al2O3 based catalysts for CO2 methanation - a comparative and operando XRD-CT study. Middelkoop, V., Vamvakeros, A., de Wit, D., Jacques, S. D., Danaci, S., Jacquot, C., de Vos, Y., Matras, D., Price, S. W. & Beale, A. M. Journal of CO2 Utilization 33, 478–487 (2019). doi: https://doi.org/10.1016/j.jcou.2019.07.013.
Lattice dynamics and phase stability of rhombohedral antimony under high pressure. Minelli, A., Souliou, S. M., Nguyen-Thanh, T., Romero, A. H., Serrano, J., Hernandez, W. I., Verstraete, M. J., Dmitriev, V. & Bosak, A. Physical Review B 100, (2019). doi: https://doi.org/10.1103/physrevb.100.104305.
Compton polarimetry with a multi-layer CdTe focal plane prototype. Moita, M., Caroli, E., Maia, J. M., da Silva R.M., C., Auricchio, N., Stephen, J. B., Pàscoa, M. & A.M.F., T. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 918, 93–98 (2019). doi: https://doi.org/10.1016/j.nima.2018.10.192.
Multilayer based x-ray optics at the ESRF. Morawe, C. 13th International Conference on Synchrotron Radiation Instrumentation (SRI 2018) - 2054, 060002–1-060002–11 (2019). doi: https://doi.org/10.1063/1.5084633.
On isothermality in some commonly used plug flow reactors for X-ray based investigations of catalysts. Newton, M. A., Checchia, S., Knorpp, A. J., Stoian, D., van Beek, W., Emerich, H., Longo, A. & van Bokhoven, J. A. Catalysis Science & Technology 9, 3081–3089 (2019). doi: https://doi.org/10.1039/c9cy00464e.
Convenient Preparation of Graphene Oxide from Expandable Graphite and Its Characterization by Positron Annihilation Lifetime Spectroscopy. Panzarasa, G., Consolati, G., Scavini, M., Longhi, M. & Quasso, F. C 5, 6 (2019). doi: https://doi.org/10.3390/c5010006.
Surface phases and surface freezing in an ionic liquid. Pontoni, D., Haddad, J., Murphy, B. M., Festersen, S., Konovalov, O., Ocko, B. M. & Deutsch, M. Journal of Physical Chemistry C 123, 3058–3066 (2019). doi: https://doi.org/10.1021/acs.jpcc.9b00286.
Quantifying fatigue overload retardation mechanisms by energy dispersive X-ray diffraction. Simpson, C. A., Kozuki, S., Lopez-Crespo, P., Mostafavi, M., Connolley, T. & Withers, P. J. Journal of the Mechanics and Physics of Solids 124, 392–410 (2019). doi: https://doi.org/10.1016/j.jmps.2018.10.020.
Interfacial Stereocomplexation To Strengthen Fused Deposition Modeled Poly(lactide) Welds. Srinivas, V., van Hooy-Corstjens, C. S. J., Vaughan, G. B. M., van Leeuwen, B., Rastogi, S. & Harings, J. A. W. ACS Applied Polymer Materials 1, 2131–2139 (2019). doi: https://doi.org/10.1021/acsapm.9b00421.
Control of Pharmaceutical Cocrystal Polymorphism on Various Scales by Mechanochemistry: Transfer from the Laboratory Batch to the Large-Scale Extrusion Processing. Stolar, T., Lukin, S., Tireli, M., Sovic, I., Karadeniz, B., Kerekovic, I., Matijasic, G., Gretic, M., Katancic, Z., Dejanovic, I., di Michiel, M., Halasz, I. & Uzarevic, K. Acs Sustainable Chemistry & Engineering 7, 7102–7110 (2019). doi: https://doi.org/10.1021/acssuschemeng.9b00043.
Pushing data quality for laboratory pair distribution function experiments. Thomae, S. L. J., Prinz, N., Hartmann, T., Teck, M., Correll, S. & Zobel, M. Review of Scientific Instruments 90, 043905 (2019). doi: https://doi.org/10.1063/1.5093714.
Damage in a cast AlSi12Ni alloy: In situ tomography, 2D and 3D image correlation. Tireira, A., Bornert, M., Requena, G., Maire, E., Sao Jao, S., Borbély, A. & Klocker, H. Materialia 8, 100475–1-100475–8 (2019). doi: https://doi.org/10.1016/j.mtla.2019.100475.
Soft templating and disorder in an applied 1D cobalt coordination polymer electrocatalyst. Triana, C. A., Moré, R., Bloomfield, A. J., Petrovic, P. V., Ferrón, S. G., Stanley, G., Zaric, S. D., Fox, T., Brothers, E. N., Sheehan, S. W., Anastas, P. T. & Patzke, G. R. Matter 1, 1354–1369 (2019). doi: https://doi.org/10.1016/j.matt.2019.06.021.
Influence of high hydrostatic pressure on solid supported DPPC bilayers with hyaluronan in the presence of Ca2+ ions. Zander, T., D.C.F., W., Raj, A., Salmen, P., Dogan, S., Dèdinaitè, A., Garamus, V. M., Schreyer, A., Claesson, P. M. & Willumeit-Römer, R. Soft Matter 15, 7295–7304 (2019). doi: https://doi.org/10.1039/c9sm01066a.
A comparative study of experimental configurations in synchrotron pair distribution function. Zea-Garcia, J. D., la Torre A.G., D., M.A.G., A. & Cuesta, A. Materials 12, 1347–1-1347–15 (2019). doi: https://doi.org/10.3390/ma12081347.
Synthesis of Ti matrix composites reinforced with TiC particles: In situ synchrotron X-ray diffraction and modeling. Andrieux, J., Gardiola, B. & Dezellus, O. Journal of Materials Science 53, 9533–9544 (2018). doi: https://doi.org/10.1007/s10853-018-2258-8.
Sharing powder diffraction raw data: Challenges and benefits. Aranda, M. Journal of Applied Crystallography 51, 1739–1744 (2018). doi: https://doi.org/10.1107/S160057671801556X.
X-ray physico-chemical imaging during activation of cobalt-based Fischer–Tropsch synthesis catalysts. Beale, A. M., S.D.M., J., Di Michiel, M., J.F.W., M., S.W.T., P., Senecal, P., Vamvakeros, A. & Paterson, J. Philosophical Transactions of the Royal Society A 376, 20170057–1-20170057–14 (2018). doi: https://doi.org/10.1098/rsta.2017.0057.
Recent advances in finite element modelling of ductile fracture at mesoscale. Bouchard, P. O., Navas, V. T., Shakoor, M., Morgeneyer, T., Buljac, A., Helfen, L., Hild, F. & Bernacki, M. 17th International Conference on Metal Forming - 15, 39–45 (2018). doi: https://doi.org/10.1016/j.promfg.2018.07.167.
Effect of void arrangement on ductile damage mechanisms in nodular graphite cast iron: In situ 3D measurements. Buljac, A., Helfen, L., Hild, F. & Morgeneyer, T. F. Engineering Fracture Mechanics 192, 242–261 (2018). doi: https://doi.org/10.1016/j.engfracmech.2018.01.008.
Evaluation of measurement uncertainties of digital volume correlation applied to laminography data. Buljac, A., Taillandier-Thomas, T., Helfen, L., Morgeneyer, T. F. & Hild, F. Journal of Strain Analysis for Engineering Design 53, 49–65 (2018). doi: https://doi.org/10.1177/0309324717748097.
Structural studies of carbons by neutron and x-ray scattering. Burian, A., Dore, J. C. & Jurkiewicz, K. Reports on Progress in Physics 82, 016501–1-016501–34 (2018). doi: https://doi.org/10.1088/1361-6633/aae882.
Load partition and microstructural evolution during hot deformation of Ti-6Al-6V-2Sn matrix composites, and possible strengthening mechanisms. Canelo-Yubero, D., Poletti, C., Warchomicka, F., Daniels, J. & Requena, G. Journal of Alloys and Compounds 764, 937–946 (2018). doi: https://doi.org/10.1016/j.jallcom.2018.06.097.
Hard X-ray and soft gamma ray polarimetry with CdTe/CZT spectro-imager. Caroli, E., Moita, M., da Silva R.M.C., Del Sordo, S., De Cesare, G., Maia, J. M. & Pàscoa, M. Galaxies 6, 69–1-69–19 (2018). doi: https://doi.org/10.3390/galaxies6030069.
Quantification of photoinduced bending of dynamic molecular crystals: From macroscopic strain to kinetic constants and activation energies. Chizhik, S., Sidelnikov, A., Zakharov, B., Naumov, P. & Boldyreva, E. Chemical Science 9, 2319–2335 (2018). doi: https://doi.org/10.1039/C7SC04863G.
The production of a lead glaze with galena: Thermal transformations in the PbS-SiO2 system. Di Febo, R., Molera, J., Pradell, T., Melgarejo, J. C., Madrenas, J. & Vallcorba, O. Journal of the American Ceramic Society 101, 2119–2129 (2018). doi: https://doi.org/10.1111/jace.15346.
Zernike phase contrast in high-energy x-ray transmission microscopy based on refractive optics. Falch, K. V., Lyubomirsky, M., Casari, D., Snigirev, A., Snigireva, I., Detlefs, C., Di Michiel, M., Lyatun, I. & Mathiesen, R. H. Ultramicroscopy 184, 267–273 (2018). doi: https://doi.org/10.1016/j.ultramic.2017.10.001.
Identifying the Cause of Rupture of Li-Ion Batteries during Thermal Runaway. Finegan, D. P., Darcy, E., Keyser, M., Tjaden, B., Heenan, T. M. M., Jervis, R., Bailey, J. J., Vo, N. T., Magdysyuk, O. V., Drakopoulos, M., Di Michiel, M., Rack, A., Hinds, G., Brett, D. J. L. & Shearing, P. R. Advanced Science 5, 1700369 (2018). doi: https://doi.org/10.1002/advs.201700369.
Experimental and computational study on phase transformations in superelastic NiTi snake-like spring. Frost, M., Sedlák, P., Heller, L., Kaderávek, L. & Sittner, P. Smart Materials and Structures 27, 095005–1-095005–10 (2018). doi: https://doi.org/10.1088/1361-665X/aacca4.
Evaluation of residual stresses introduced by laser shock peening in steel using different measurement techniques. Glaser, D., Newby, M., Polese, C., Berthe, L., Venter, A. M., Marais, D., Nobre, J. P., Styger, G., Paddea, S. & van Staden S.N. 9th International Conference on Mechanical Stress Evaluation by Neutron and Synchrotron Radiation - 4, 97–102 (2018). doi: https://doi.org/10.21741/9781945291678-7.
Surface structure evolution in a homologous series of ionic liquids. Haddad, J., Pontoni, D., Murphy, B. M., Festersen, S., Runge, B., Magnussen, O. M., Steinrück, H. G., Reichert, H., Ocko, B. M. & Deutsch, M. Proceedings of the National Academy of Sciences of the USA 115, E1100-E1107 (2018). doi: https://doi.org/10.1073/pnas.1716418115.
Continuous and reversible atomic rearrangement in a multifunctional titanium alloy. Hao, Y. L., Gong, D. L., Li, T., Wang, H. L., Cairney, J. M., Wang, Y. D., Obbard, E. G., Sun, F., Prima, F., Li, S. J., Du, K. & Yang, R. Materialia 2, 1–8 (2018). doi: https://doi.org/10.1016/j.mtla.2018.08.013.
In situ flow MAS NMR spectroscopy and synchrotron PDF analyses of the local response of the Brønsted acidic site in SAPO-34 during hydration at elevated temperatures. Kalantzopoulos, G. N., Lundvall, F., Checchia, S., Lind, A., Wragg, D. S., Fjellvåg, H. & Arstad, B. ChemPhysChem 19, 519–528 (2018). doi: https://doi.org/10.1002/cphc.201700973.
Real-time diffraction computed tomography data reduction. Kieffer, J., Petitdemange, S. & Vincent, T. Journal of Synchrotron Radiation 25, 612–617 (2018). doi: https://doi.org/10.1107/S1600577518000607.
Formation of oriented polar crystals in bulk poly(vinylidene fluoride)/high-aspect-ratio organoclay nanocomposites. Kiersnowski, A., Chrissopoulou, K., Selter, P., Chlebosz, D., Hou, B., Lieberwirth, I., Honkimäki, V., Mezger, M., Anastasiadis, S. H. & Hansen, M. R. Langmuir 34, 13375–13386 (2018). doi: https://doi.org/10.1021/acs.langmuir.8b02412.
Lattice parameter evolution during heating of Ti-45Al-7.5Nb-0.25/0.5C alloys under atmospheric and high pressures. Li, X., Dippenaar, R., Shiro, A., Shobu, T., Higo, Y., Reid, M., Suzuki, H., Akita, K., Funakoshi, K. I. & Liss, K. D. Intermetallics 102, 120–131 (2018). doi: https://doi.org/10.1016/j.intermet.2018.08.011.
Frequency-dependent decoupling of domain-wall motion and lattice strain in bismuth ferrite. Liu, L., Rojac, T., Damjanovic, D., Di Michiel, M. & Daniels, J. Nature Communications 9, 4928–1-4928–10 (2018). doi: https://doi.org/10.1038/s41467-018-07363-y.
Synchrotron X-ray diffraction based method for stress intensity factor evaluation in the bulk of materials. Lopez-Crespo, P., Peralta, J. V. & Withers, P. J. Theoretical and Applied Fracture Mechanics 98, 72–77 (2018). doi: https://doi.org/10.1016/j.tafmec.2018.09.010.
Mechanochemical carbon-carbon bond formation that proceeds via a cocrystal intermediate. Lukin, S., Tireli, M., Loncaric, I., Barisic, D., Sket, P., Vrsaljko, D., di Michiel, M., Plavec, J., Uzarevic, K. & Halasz, I. Chemical Communications 54, 13216–13219 (2018). doi: https://doi.org/10.1039/c8cc07853j.
Ultrastable metallic glasses formed on cold substrates. Luo, P., Cao, C. R., Zhu, F., Lv, Y. M., Liu Y., H., Wen, P., Bai, H. Y., Vaughan, G. B. M., Di Michiel, M., Ruta, B. & Wang, W. H. Nature Communications 9, 1389–1-1389–9 (2018). doi: https://doi.org/10.1038/s41467-018-03656-4.
Influence of the ageing conditions and the initial microstructure on the precipitation of α phase in Ti-17 alloy. Maury, N., Denand, B., Dehmas, M., Archambeau-Mirguet, C., Delfosse, J. & Aeby-Gautier, E. Journal of Alloys and Compounds 763, 446–458 (2018). doi: https://doi.org/10.1016/j.jallcom.2018.04.302.
Investigating optimal cutting configurations for the contour method of weld residual stress measurement. Muránsky, O., Hosseinzadeh, F., Hamelin, C. J., Traore, Y. & Bendeich, P. J. International Journal of Pressure Vessels and Piping 164, 55–67 (2018). doi: https://doi.org/10.1016/j.ijpvp.2017.04.006.
3D maps of mineral composition and hydroxyapatite orientation in fossil bone samples obtained by X-ray diffraction computed tomography. Mürer, F. K., Sanchez, S., Alvarez-Murga, M., Di Michiel, M., Pfeiffer, F., Bech, M. & Breiby, D. W. Scientific Reports 8, 10052–1-10052–13 (2018). doi: https://doi.org/10.1038/s41598-018-28269-1.
Architectured duplex stainless steels micro-composite: Elaboration and microstructure characterization. Naser, H., Deschamps, A., Mantel, M. & Véron, M. Materials and Design 145, 156–167 (2018). doi: https://doi.org/10.1016/j.matdes.2018.02.069.
Synchrotron XRD evaluation of residual stresses introduced by laser shock peening for steam turbine blade applications. Newby, M., Steuwer, A., Glaser, D., Polese, C., Hattingh, D. G. & Gorny, C. 9th International Conference on Mechanical Stress Evaluation by Neutron and Synchrotron Radiation - 4, 97–102 (2018). doi: https://doi.org/10.21741/9781945291678-15.
The secret life of Al2O3 supported platinum nanoparticles during CO/ O2 redox cycling at room temperature and its relation to CO oxidation to CO2 at room temperature. Newton, M., Ferri, D., Checcia, S., Di Michiel, M., Lutz-Bueno, V., Abdala, P. & Nachtegaal, M. Abstracts of Papers of the American Chemical Society 256, Amer Chem Soc (2018). .
Molecular scale structure and dynamics at an ionic liquid/electrode interface. Reichert, P., Kjaer, K. S., van Driel T.B., Mars, J., Ochsmann, J. W., Pontoni, D., Deutsch, M., Nielsen, M. M. & Mezger, M. Faraday Discussions 206, 141–157 (2018). doi: https://doi.org/10.1039/C7FD00171A.
New insights into carbon distribution in bainitic Ferrite. Rementeria, R., Garcia-Mateo, C. & Caballero, F. G. HTM Journal of Heat Treatment and Materials 73, 68–79 (2018). doi: https://doi.org/10.3139/105.110351.
Crack bridging in as-fabricated and embrittled tungsten single fibre-reinforced tungsten composites shown by a novel in-situ high energy synchrotron tomography bending test. Riesch, J., Buffière, J. Y., Höschen, T., Scheel, M., Linsmeier, C. & You, J. H. Nuclear Materials and Energy 15, 1–12 (2018). doi: https://doi.org/10.1016/j.nme.2018.03.007.
An investigation into the interface behaviour of an aluminium/silicon. in [Formatter not found: BookTitle] European Conference on Spacecraft Structures, Materials and Environmental Testing, Rollings, L., McDonald, S. A., Roy, M. J. & Withers, P. J. (2018). , .
Ductile damage mechanism under shear-dominated loading: In-situ tomography experiments on dual phase steel and localization analysis. Roth, C. C., Morgeneyer, T. F., Cheng, Y., Helfen, L. & Mohr, D. International Journal of Plasticity 109, 169–192 (2018). doi: https://doi.org/10.1016/j.ijplas.2018.06.003.
The isotropic Compton profile difference across the phase transition of VO2. Ruotsalainen, K. O., Inkinen, J., Pylkkänen, T., Buslaps, T., Hakala, M., Hämäläinen, K. & Huotari, S. European Physical Journal B 91, 225–1-225–6 (2018). doi: https://doi.org/10.1140/epjb/e2018-90121-x.
A combined XRD, solvatochromic, and cyclic voltammetric study of poly (3,4-ethylenedioxythiophene) doped with sulfonated polyarylethersulfones: Towards new conducting polymers. Sabatini, V., Pifferi, V., Checchia, S., Rebeccani, S., Farina, H., Ortenzi, M. A. & Falciola, L. Polymers 10, 770–1-770–26 (2018). doi: https://doi.org/10.3390/polym10070770.
Electrodes modified with poly(3,4-ethylenedioxythiophene) doped with sulfonated polyarylethersulfones: Towards new conducting polymers. Sabatini, V., Pifferi, V., Checchia, S., Rebeccani, S., Farina, H., Ortenzi, M. A. & Falciola, L., in 020096–1-020096–4. (2018). doi: https://doi.org/10.1063/1.5045958.
From light to heavy alkali metal tetraphosphonates (M = Li, Na, K, Rb, Cs): Cation size-induced structural diversity and water-facilitated proton conductivity. Salcedo, I. R., R.M.P., C., Bazaga-Garcia, M., Vasileiou, A., Papadaki, M., Olivera-Pastor, P., Infantes-Molina, A., Losilla, E. R., Mezei, G., Cabeza, A. & Demadis, K. D. CrystEngComm 20, 7648–7658 (2018). doi: https://doi.org/10.1039/C8CE01351A.
Revealing the sequence of switching mechanisms in polycrystalline ferroelectric/ferroelastic materials. Schultheiss, J., Liu, L., Kungl, H., Weber, M., Venkataraman, L. K., Checchia, S., Damjanovic, D., Daniels, J. E. & Koruza, J. Acta Materialia 157, 355–363 (2018). doi: https://doi.org/10.1016/j.actamat.2018.07.018.
“On demand” triggered crystallization of CaCO3 from solute precursor species stabilized by the water-in-oil microemulsion. Stawski, T. M., Roncal-Herrero, T., Fernández-Martínez, A., Matamoros-Veloza, A., Kröger, R. & Benning, L. G. Physical Chemistry - Chemical Physics 20, 13825–13835 (2018). doi: https://doi.org/10.1039/C8CP00540K.
Milling for better pharmaceuticals: green synthesis, phase transformations and reaction kinetics of vitamin B-3: C cocrystal polymorphs studied in situ. Stolar, T., Lukin, S., Tireli, M., Di Michiel, M., Dejanovic, I., Halasz, I. & Uzarevic, K. Acta Crystallographica A-foundation and Advances 74, E134–E134 (2018). doi: https://doi.org/10.1107/S2053273318093270.
Bainite formation in carbon and nitrogen enriched low alloyed steels: Kinetics and microstructures. Teixeira, J., Catteau, S. D., Van Landeghem, H. P., Dulcy, J., Dehmas, M., Redjaïmia, A., Denis, S. & Courteaux, M. HTM Journal of Heat Treatment and Materials 73, 144–156 (2018). doi: https://doi.org/10.3139/105.110352.
Revealing grain boundary sliding from textures of a deformed nanocrystalline Pd–Au alloy. Toth, L. S., Skrotzki, W., Zhao, Y., Pukenas, A., Braun, C. & Birringer, R. Materials 11, 190–1-190–8 (2018). doi: https://doi.org/10.3390/ma11020190.
Compositional dependence of disordered structures in Na½Bi½TiO3-BaTiO3 solid solutions. Tung, P., Major, M., Hudspeth, J. & Daniels J., E. Materials Research Bulletin 106, 301–306 (2018). doi: https://doi.org/10.1016/j.materresbull.2018.06.019.
Enthalpy vs. friction: Heat flow modelling of unexpected temperature profiles in mechanochemistry of metal–organic frameworks. Uzarevic, K., Ferdelji, N., Mrla, T., Julien, P. A., Halasz, B., Friscic, T. & Halasz, I. Chemical Science 9, 2525–2532 (2018). doi: https://doi.org/10.1039/C7SC05312F.
5D operando tomographic diffraction imaging of a catalyst bed. Vamvakeros, A., S.D.M., J., Di Michiel, M., Matras, D., Middelkoop, V., Ismagilov, I. Z., Matus, E. V., Kuznetsov, V. V., Drnec, J., Senecal, P. & Beale, A. M. Nature Communications 9, 4751–1-4751–11 (2018). doi: https://doi.org/10.1038/s41467-018-07046-8.
Isothermal decomposition of carbon and nitrogen-enriched austenite in 23MnCrMo5 low-alloy steel. Van Landeghem, H. P., Catteau, S. D., Teixeira, J., Dulcy, J., Dehmas, M., Courteaux, M., Redjaïmia, A. & Denis, S. Acta Materialia 148, 363–373 (2018). doi: https://doi.org/10.1016/j.actamat.2018.02.008.
A complete reassessment of standard residual stress uncertainty analyses using neutron diffraction emphasizing the influence of grain size. Wimpory, R. C., Martins, R. V., Hofmann, M., Kornmeier, J. R., Moturu, S. & Ohms, C. International Journal of Pressure Vessels and Piping 164, 80–92 (2018). doi: https://doi.org/10.1016/j.ijpvp.2017.09.002.
In-flight energy calibration of the space-borne Compton polarimeter POLAR. Xiao, H., Hajdas, W., Wu, B., Produit, N., Bao, T., Bernasconi, T., Cadoux, F., Dong, Y., Egli, K., Gauvin, N., Kole, M., Kramert, R., Kong, S., Li, L., Li, Z., Liu, J., Liu, X., Marcinkowski, R., Rybka, D. K., Pohl, M., Shi, H., Song, L., Sun, J., Xiong, S., Szabelski, J., Socha, P., Wang, R., Wen, X., Wu, X., Zhang, L., Zhang, P., Zhang, S., Zhang, X., Zhang, Y. & Zwolinska, A. Astroparticle Physics 103, 74–86 (2018). doi: https://doi.org/10.1016/j.astropartphys.2018.07.009.
A squeeze on the perovskite structure improves the thermoelectric performance of Europium Calcium Titanates. Xiao, X., Widenmeyer, M., Mueller, K., Scavini, M., Checchia, S., Castellano, C., Ma, D., Yoon, S., Xie, W., Starke, U., Zakharchuk, K., Kovalevsky, A. & Weidenkaff, A. Materials Today Physics 7, 96–105 (2018). doi: https://doi.org/10.1016/j.mtphys.2018.11.009.
Innovative in situ ball mill for X-ray diffraction. Ban, V., Sadikin, Y., Lange, M., Tumanov, N., Filinchuk, Y., Cerný, R. & Casati, N. Analytical Chemistry 89, 13176–13181 (2017). doi: https://doi.org/10.1021/acs.analchem.7b02871.
Laue lens: The challenge of focusing gamma rays. International Conference on Space Optics — ICSO 2008, Barrière, N., von Ballmoos P., Natalucci, L., Roudil, G., Bastie, P., Courtois, P., Jentschel, M., Abrosimov, N. V. & Rousselle, J., in 1056603–1-1056603–7. (2017). doi: https://doi.org/10.1117/12.2308289.
The X-ray micro-tomography backed by molecular dynamics simulations in the analysis of shock-induced damage in ductile materials. Bontaz-Carion, J., Soulard, L., Lescoute, E., Sollier, A. & Berthe, L. Materials Science Forum 905, 182–189 (2017). doi: https://doi.org/10.4028/www.scientific.net/MSF.905.182.
Numerical validation framework for micromechanical simulations based on synchrotron 3D imaging. Buljac, A., Shakoor, M., Neggers, J., Bernacki, M., Bouchard, P. O., Helfen, L., Morgeneyer, T. F. & Hild, F. Computational Mechanics 59, 419–441 (2017). doi: https://doi.org/10.1007/s00466-016-1357-0.
Cu/CGO cermet based electrodes for symmetric and reversible solid oxide fuel cells. Proceedings of the 10TH International Conference on Sustainable Energy and Environmental Protection: Hydrogen and Fuel Cells, Carollo, G., Garbujo, A., Ferri, D., Natile, M. M. & Glisenti, A., in ed. Krope, J., Olabi, A. G., Goricanec, D. & Bozicnik, S., 53–64. (2017). .
Synergy of Contact between ZnO Surface Planes and PdZn Nanostructures: Morphology and Chemical Property Effects in the Intermetallic Sites for Selective 1,3-Butadiene Hydrogenation. Castillejos-Lopez, E., Agostini, G., Di Michel, M., Iglesias-Juez, A. & Bachiller-Baeza, B. Acs Catalysis 7, 796–811 (2017). doi: https://doi.org/10.1021/acscatal.6b03009.
Electromigration Mechanism of Failure in Flip-Chip Solder Joints Based on Discrete Void Formation. Chang, Y. W., Cheng, Y., Helfen, L., Xu, F., Tian, T., Scheel, M., Di Michiel, M., Chen, C., Tu, K. N. & Baumbach, T. Scientific Reports 7, 17950 (2017). doi: https://doi.org/10.1038/s41598-017-06250-8.
Particle-induced morphological modification of Al alloy equiaxed dendrites revealed by sub-second in situ microtomography. Daudin, R., Terzi, S., Lhuissier, P., Tamayo, J., Scheel, M., Babu, N. H., Eskin, D. G. & Salvo, L. Acta Materialia 125, 303–310 (2017). doi: https://doi.org/10.1016/j.actamat.2016.12.005.
Phase analysis of NiTi wire based on synchrotron 2D x-ray diffraction pattern in Matlab. Dudr, M., Simek, D. & Drahokoupil, J. Acta Polytechnica CTU Proceedings 9, 8–12 (2017). doi: https://doi.org/10.14311/APP.2017.9.0008.
Comparing the atomic and macroscopic aging dynamics in an amorphous and partially crystalline Zr44Ti11Ni10Cu10Be25 bulk metallic glass. Evenson, Z., Payes-Playa, A., Chushkin, Y., di Michiel, M., Pineda, E. & Ruta, B. Journal of Materials Research 32, 2014–2021 (2017). doi: https://doi.org/10.1557/jmr.2017.187.
In situ hard X-ray transmission microscopy for material science. Falch, K. V., Casari, D., Di Michiel, M., Detlefs, C., Snigireva, A., Snigireva, I., Honkimaki, V. & Mathiesen, R. H. Journal of Materials Science 52, 3497–3507 (2017). doi: https://doi.org/10.1007/s10853-016-0643-8.
Effect of solution heat treatment on microstructure and damage accumulation in cast Al-Cu alloys. Fernández Gutiérrez, R., Sket, F., Maire, E., Wilde, F., Boller, E. & Requena, G. Journal of Alloys and Compounds 697, 341–352 (2017). doi: https://doi.org/10.1016/j.jallcom.2016.11.280.
Tracking Internal Temperature and Structural Dynamics during Nail Penetration of Lithium-Ion Cells. Finegan, D. P., Tjaden, B., Heenan, T. M. M., Jervis, R., Di Michiel, M., Rack, A., Hinds, G., Brett, D. J. L. & Shearing, P. R. Journal of the Electrochemical Society 164, A3285–A3291 (2017). doi: https://doi.org/10.1149/2.1501713jes.
The effect of moisture on cellulose nanocrystals intended as a high gas barrier coating on flexible packaging materials. Fotie, G., Rampazzo, R., Ortenzi, M. A., Checchia, S., Fessas, D. & Piergiovanni, L. Polymers 9, 415–1-415–16 (2017). doi: https://doi.org/10.3390/polym9090415.
Rayonnement synchrotron à haute énergie et diffraction des rayons X in situ. Rayons X et Matière 5, Geandier, G., Malard, B. & Buslaps, T., in ed. Guinebretière, R. & Goudeau, P., 149–192. (2017). .
Influence of Yb:YAG laser beam parameters on haynes 188 weld fusion zone microstructure and mechanical properties. Graneix, J., Beguin, J. D., Alexis, J. & Masri, T. Metallurgical and Materials Transactions B 48, 2007–2016 (2017). doi: https://doi.org/10.1007/s11663-017-0989-6.
Anatomizing deformation mechanisms in nanocrystalline Pd90Au10. Grewer, M., Braun, C., Deckarm, M. J., Lohmiller, J., Gruber, P. A., Honkimäki, V. & Birringer, R. Mechanics of Materials 114, 254–267 (2017). doi: https://doi.org/10.1016/j.mechmat.2017.08.010.
Observation of crack growth in a polycrystalline ferroelectric by synchrotron X-ray diffraction. Huber, J. E., Hofmann, F., Barhli, S., Marrow, T. J. & Hildersley, C. Scripta Materialia 140, 23–26 (2017). doi: https://doi.org/10.1016/j.scriptamat.2017.06.053.
Characterization of spectrometric photon-counting X-ray detectors at different pitches. Jurdit, M., Brambilla, A., Moulin, V., Ouvrier-Buffet, P., Radisson, P. & Verger, L. Journal of Instrumentation 12, T09008–1-T09008–17 (2017). doi: https://doi.org/10.1088/1748-0221/12/09/T09008.
Influence of the martensitic transformation on the microscale plastic strain heterogeneities in a duplex stainless steel. Lechartier, A., Martin, G., Comby, S., Roussel-Dherbey, F., Deschamps, A., Mantel, M., Meyer, N., Verdier, M. & Véron, M. Metallurgical and Materials Transactions A 48, 20–25 (2017). doi: https://doi.org/10.1007/s11661-016-3858-z.
Residual stress distribution analysis of heat treated APS TBC using image based modelling. Li, C., Zhang, X., Chen, Y., Carr, J., Jacques, S., Behnsen, J., di Michiel, M., Xiao, P. & Cernik, R. Data in Brief 13, 557–561 (2017). doi: https://doi.org/10.1016/j.dib.2017.06.016.
Understanding the residual stress distribution through the thickness of atmosphere plasma sprayed (APS) thermal barrier coatings (TBCs) by high energy synchrotron XRD; digital image correlation (DIC) and image based modelling. Li, C., Zhang, X., Chen, Y., Carr, J., Jacques, S., Behnsen, J., di Michiel, M., Xiao, P. & Cernik, R. Acta Materialia 132, 1–12 (2017). doi: https://doi.org/10.1016/j.actamat.2017.03.044.
Mid-thickness studies of the stress intensity factor in the bulk of bainitic steel. Lopez-Crespo, P., Vazquez-Peralta, J., Simpson, C., Buslaps, T. & Withers, P. J. Frattura ed Integrità Strutturale 41, 203–210 (2017). doi: https://doi.org/10.3221/IGF-ESIS.41.28.
Solid-State Supramolecular Assembly of Salicylic Acid and 2-Pyridone, 3-Hydroxypyridine or 4-Pyridone. Lukin, S., Stolar, T., Tireli, M., Barisic, D., di Michiel, M., Uzarevic, K. & Halasz, I. Croatica Chemica Acta 90, 707–710 (2017). doi: https://doi.org/10.5562/cca3339.
The crystal structure of (Nb0.75Cu0.25)Sn2 in the Cu-Nb-Sn system. Martin, S., Walnsch, A., Nolze, G., Leineweber, A., Léaux, F. & Scheuerlein, C. Intermetallics 80, 16–21 (2017). doi: https://doi.org/10.1016/j.intermet.2016.09.008.
Aqueous bismuth titanium-oxo sulfate cluster speciation and crystallization. Molina, P. I., Kozma, K., Santala, M., Falaise, C. & Nyman, M. Angewandte Chemie International Edition 56, 16277–16281 (2017). doi: https://doi.org/10.1002/anie.201709539.
Electron backscatter diffraction beyond the mainstream. Nolze, G., Hielscher, R. & Winkelmann, A. Crystal Research and Technology 52, 1600252–1-1600252–24 (2017). doi: https://doi.org/10.1002/crat.201600252.
Local approach to stress relaxation cracking in a AISI 316L-type austenitic stainless steel: Tomography damage quantification and FE simulations. Pommier, H., Busso, E. P., Morgeneyer, T. F. & Pineau, A. Engineering Fracture Mechanics 183, 170–179 (2017). doi: https://doi.org/10.1016/j.engfracmech.2017.03.050.
Self-segregated nanostructure in room temperature ionic liquids. Pontoni, D., Haddad, J., Di Michiel, M. & Deutsch, M. Soft Matter 13, 6947–6955 (2017). doi: https://doi.org/10.1039/c7sm01464c.
Self-segregated nanostructure in room temperature ionic liquids (vol 13, pg 6947, 2017). Pontoni, D., Haddad, J., Di Michiel, M. & Deutsch, M. Soft Matter 13, 6956–6956 (2017). doi: https://doi.org/10.1039/c7sm90156a.
Investigation of frequency effect on electrical fatigue and crack tip domain-switching behaviors in Pb(Mg1/3Nb2/3)0.65Ti0.35O3 ceramics via synchrotron X-ray diffraction. Promsawat, M., Promsawat, N., Jiansirisomboon, S., Namsar, O., Marlton, F., Daniels, J. & Pojprapai, S. Journal of the European Ceramic Society 37, 4609–4616 (2017). doi: https://doi.org/10.1016/j.jeurceramsoc.2017.06.020.
Residual strain in the Nb3Sn 11T dipole magnet coils for HL-LHC. Scheuerlein, C., Di Michiel, M., Hofmann, M., Lorentzon, M., Lackner, F., Flukiger, R., Savary, F. & Bottura, L. Superconductor Science & Technology 30, 125002 (2017). doi: https://doi.org/10.1088/1361-6668/aa8fae.
The contribution of high-energy x-rays and neutrons to characterization and development of intermetallic titanium aluminides. Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications, Schmoelzer, T., Liss, K. D., Staron, P., Stark, A., Schwaighofer, E., Lippmann, T., Clemens, H. & Mayer, S., in ed. Staron, P., Schreyer, A., Clemens, H. & Mayer, S., 395–424. (2017). .
Real-Time Scattering-Contrast Imaging of a Supported Cobalt-Based Catalyst Body during Activation and Fischer-Tropsch Synthesis Revealing Spatial Dependence of Particle Size and Phase on Catalytic Properties. Senecal, P., Jacques, S. D. M., Di Michiel, M., Kimber, S. A. J., Vamvakeros, A., Odarchenko, Y., Lezcano-Gonzalez, I., Paterson, J., Ferguson, E. & Beale, A. M. Acs Catalysis 7, 2284–2293 (2017). doi: https://doi.org/10.1021/acscatal.6b03145.
On the choice of boundary conditions for micromechanical simulations based on 3D imaging. Shakoor, M., Buljac, A., Neggers, J., Hild, F., Morgeneyer, T. F., Helfen, L., Bernacki, M. & Bouchard, P. O. International Journal of Solids and Structures 112, 83–96 (2017). doi: https://doi.org/10.1016/j.ijsolstr.2017.02.018.
The Role of Local Instabilities in Fluid Invasion into Permeable Media. Singh, K., Scholl, H., Brinkmann, M., Di Michiel, M., Scheel, M., Herminghaus, S. & Seemann, R. Scientific Reports 7, 444 (2017). doi: https://doi.org/10.1038/s41598-017-00191-y.
Chemical Structures of Specific Sodium Ion Battery Components Determined by Operando Pair Distribution Function and X-ray Diffraction Computed Tomography. Sottmann, J., Di Michiel, M., Fjellvag, H., Malavasi, L., Margadonna, S., Vajeeston, P., Vaughan, G. B. M. & Wragg, D. S. Angewandte Chemie-international Edition 56, 11385–11389 (2017). doi: https://doi.org/10.1002/anie.201704271.
Linear parabolic single-crystal diamond refractive lenses for synchrotron X-ray sources. Terentyev, S., Polikarpov, M., Snigireva, I., Di Michiel, M., Zholudev, S., Yunkin, V., Kuznetsov, S., Blank, V. & Snigirev, A. Journal of Synchrotron Radiation 24, 103–109 (2017). doi: https://doi.org/10.1107/S1600577516017331.
Multiscale characterization of a lithium/sulfur battery by coupling operando X-ray tomography and spatially-resolved diffraction. Tonin, G., Vaughan, G. B. M., Bouchet, R., Alloin, F., Di Michiel, M., Boutafa, L., Colin, J. F. & Barchasz, C. Scientific Reports 7, 2755 (2017). doi: https://doi.org/10.1038/s41598-017-03004-4.
Real-time chemical imaging of working catalytic membrane reactors. Vamvakeros, A., Jacques, S. D. M., Middelkoop, V., Di Michiel, M. & Beale, A. M. Acta Crystallographica A-foundation and Advances 73, C853–C853 (2017). doi: https://doi.org/10.1107/S2053273317087216.
In situ EDXRD study of MAG-welding using LTT weld filler materials under structural restraint. Vollert, F., Dixneit, J., Gibmeier, J., Kromm, A., Buslaps, T. & Kannengiesser, T. Materials Science Forum 905, 107–113 (2017). doi: https://doi.org/10.4028/www.scientific.net/MSF.905.107.
Observation of ultrathin precursor film formation during Ge-Si liquid-phase epitaxy from an undersaturated solution. Vonk, V., Pontoni, D., Cremers, M., Kerkenaar, A., A.A.C., B., Szweryn, W., Nowak, G., de Jong A.E.F., Dosch, H. & Vlieg, E. Langmuir 33, 814–819 (2017). doi: https://doi.org/10.1021/acs.langmuir.6b03984.
Quantitative analysis of domain textures in ferroelectric ceramics from single high-energy synchrotron X-ray diffraction images. Wang, Z. & Daniels, J. E. Journal of Applied Physics 121, 164102–1-164102–6 (2017). doi: https://doi.org/10.1063/1.4982674.
Review of the mechanical and fracture behavior of perovskite lead-free ferroelectrics for actuator applications. Webber, K. G., Vögler, M., Khansur, N. H., Kaeswurm, B., Daniels, J. E. & Schader, F. H. Smart Materials and Structures 26, 063001–1-063001–28 (2017). doi: https://doi.org/10.1088/1361-665X/aa590c.
The hydrophobic gap at high hydrostatic pressures. Wirkert, F. J., Hölzl, C., Paulus, M., Salmen, P., Tolan, M., Horinek, D. & Nase, J. Angewandte Chemie International Edition 56, 12958–12961 (2017). doi: https://doi.org/10.1002/anie.201706662.
Coupling in-situ X-ray micro- and nano-tomography and discrete element method for investigating high temperature sintering of metal and ceramic powders. Yan, Z., Martin, C. L., Bouvard, D., Jauffrès, D., Lhuissier, P., Salvo, L., Olmos, L., Villanova, J. & Guillon, O. Powders and Grains 2017 – 8th International Conference on Micromechanics on Granular Media - 140, 13006–1-13006–4 (2017). doi: https://doi.org/10.1051/epjconf/201714013006.
Upper bound on the Edwards entropy in frictional monodisperse hard-sphere packings. Baranau, V., Zhao, S. C., Scheel, M., Tallarek, U. & Schroter, M. Soft Matter 12, 3991–4006 (2016). doi: https://doi.org/10.1039/c6sm00567e.
Origin of quasi-mosaic effect for symmetric skew planes in a silicon or germanium plate. Bellucci, V., Camattari, R., Paternò, G., Guidi, V. & Mazzolari, A. Journal of Applied Crystallography 49, 1810–1813 (2016). doi: https://doi.org/10.1107/S1600576716012693.
Study of Discrete Voids Formation in Flip-Chip Solder Joints due to Electromigration Using In-Situ 3D Laminography and Finite-Element Modeling. Chang, Y. W., Cheng, Y., Xu, F., Helfen, L., Tian, T., Di Michiel, M., Chen, C., Tu, K. N. & Baumbach, T. Proceedings of the 2016 Ieee 18th Electronics Packaging Technology Conference (eptc) , 141–146 (2016). .
Study of discrete voids formation in flip-chip solder joints due to electromigration using in-situ 3D laminography and finite-element modeling. 2016 IEEE 18th Electronics Packaging Technology Conference (EPTC), Chang, Y. W., Cheng, Y., Xu, F., Helfen, L., Tian, T., Di Michiel, M., Chen, C., Tu, K. N. & Baumbach, T., in 141–146. (2016). doi: https://doi.org/10.1109/EPTC.2016.7861460.
Study of electromigration-induced formation of discrete voids in flip-chip solder joints by in-situ 3D laminography observation and finite-element modeling. Chang, Y. W., Cheng, Y., Xu, F., Helfen, L., Tian, T., Di Michiel, M., Chen, C., Tu, K. N. & Baumbach, T. Acta Materialia 117, 100–110 (2016). doi: https://doi.org/10.1016/j.actamat.2016.06.059.
Bioactive sol-gel glasses at the atomic scale: The complementary use of advanced probe and computer modeling methods. Christie, J. K., Cormack, A. N., Hanna, J. V., Martin, R. A., Newport, R. J., Pickup, D. M. & Smith, M. E. International Journal of Applied Glass Science 7, 147–153 (2016). doi: https://doi.org/10.1111/ijag.12196.
Modeling pair distribution functions of rare-earth phosphate glasses using principal component analysis. Cole, J. M., Cheng, X. & Payne, M. C. Inorganic Chemistry 55, 10870–10880 (2016). doi: https://doi.org/10.1021/acs.inorgchem.6b00907.
In situ characterization techniques based on synchrotron radiation and neutrons applied for the development of an engineering intermetallic titanium aluminide alloy. Erdely, P., Schmoelzer, T., Schwaighofer, E., Clemens, H., Staron, P., Stark, A., Liss, K. D. & Mayer, S. Metals 6, 10–1-10–27 (2016). doi: https://doi.org/10.3390/met6010010.
Correcting lateral chromatic aberrations in non-monochromatic X-ray microscopy. Falch, K. V., Detlefs, C., Di Michiel, M., Snigireva, I., Snigirev, A. & Mathiesen, R. H. Applied Physics Letters 109, 054103 (2016). doi: https://doi.org/10.1063/1.4960193.
Investigating lithium-ion battery materials during overcharge-induced thermal runaway: an operando and multi-scale X-ray CT study. Finegan, D. P., Scheel, M., Robinson, J. B., Tjaden, B., Di Michiel, M., Hinds, G., Brett, D. J. L. & Shearing, P. R. Physical Chemistry Chemical Physics 18, 30912–30919 (2016). doi: https://doi.org/10.1039/c6cp04251a.
Quantifying Bulk Electrode Strain and Material Displacement within Lithium Batteries via High-Speed Operando Tomography and Digital Volume Correlation. Finegan, D. P., Tudisco, E., Scheel, M., Robinson, J. B., Taiwo, O. O., Eastwood, D. S., Lee, P. D., Di Michiel, M., Bay, B., Hall, S. A., Hinds, G., Brett, D. J. L. & Shearing, P. R. Advanced Science 3, 1500332 (2016). doi: https://doi.org/10.1002/advs.201500332.
Nanoscale Structure of the Oil-Water Interface. Fukuto, M., Ocko, B. M., Bonthuis, D. J., Netz, R. R., Steinruck, H. G., Pontoni, D., Kuzmenko, I., Haddad, J. & Deutsch, M. Physical Review Letters 117, 256102 (2016). doi: https://doi.org/10.1103/PhysRevLett.117.256102.
Characterization and micromechanical modelling of microstructural heterogeneity effects on ductile fracture of 6xxx aluminium alloys. Hannard, F., Pardoen, T., Maire, E., Le Bourlot, C., Mokso, R. & Simar, A. Acta Materialia 103, 558–572 (2016). doi: https://doi.org/10.1016/j.actamat.2015.10.008.
Tracking the shape-dependent sintering of platinum–rhodium model catalysts under operando conditions. Hejral, U., Müller, P., Balmes, O., Pontoni, D. & Stierle, A. Nature Communications 7, 10964–1-10964–8 (2016). doi: https://doi.org/10.1038/ncomms10964.
Residual stress state in an induction hardened steel bar determined by synchrotron- and neutron diffraction compared to results from lab-XRD. Holmberg, J., Steuwer, A., Stormvinter, A., Kristoffersen, H., Haakanen, M. & Berglund, J. Materials Science and Engineering A 667, 199–207 (2016). doi: https://doi.org/10.1016/j.msea.2016.04.075.
The effect of inter-granular constraints on the response of polycrystalline piezoelectric ceramics at the surface and in the bulk. Hossain, M. J., Wang, Z., Khansur, N. H., Kimpton, J. A., Oddershede, J. & Daniels, J. E. Applied Physics Letters 109, 092905–1-092905–5 (2016). doi: https://doi.org/10.1063/1.4962125.
Preparation of a smooth GaN–Gallium solid–liquid interface. de Jong A.E.F., Vonk, V., Ruat, M., Bockowski, M., Kamler, G., Grzegory, I., Honkimäki, V. & Vlieg, E. Journal of Crystal Growth 448, 70–75 (2016). doi: https://doi.org/10.1016/j.jcrysgro.2016.05.007.
Comparison of microstructure, second phases and texture formation during melt processing of Bi-2212 mono- and multifilament wires. Kadar, J., Scheuerlein, C., Rikel, M. O., Di Michiel, M. & Huang, Y. Superconductor Science & Technology 29, 105009 (2016). doi: https://doi.org/10.1088/0953-2048/29/10/105009.
In situ 3D synchrotron laminography assessment of edge fracture in dual-phase steels: Quantitative and numerical analysis. Kahziz, M., Morgeneyer, T. F., Mazière, M., Helfen, L., Bouaziz, O. & Maire, E. Experimental Mechanics 56, 177–195 (2016). doi: https://doi.org/10.1007/s11340-015-0076-3.
Precise strain profile measurement as a function of depth in thermal barrier coatings using high energy synchrotron X-rays. Li, C., Jacques, S. D. M., Chen, Y., Xiao, P., Beale, A. M., di Michiel, M., Markossan, N., Nylen, P. & Cernik, R. J. Scripta Materialia 113, 122–126 (2016). doi: https://doi.org/10.1016/j.scriptamat.2015.10.032.
Characterisation of overloads in fatigue by 2D strain mapping at the surface and in the bulk. Lopez-Crespo, P., Mostafavi, M., Steuwer, A., Kelleher, J. F., Buslaps, T. & Withers, P. J. Fatigue and Fracture of Engineering Materials and Structures 39, 1040–1048 (2016). doi: https://doi.org/10.1111/ffe.12463.
Palladium sulphide – A highly selective catalyst for the gas phase hydrogenation of alkynes to alkenes. McCue, A. J., Guerrero-Ruiz, A., Rodríguez-Ramos, I. & Anderson, J. A. Journal of Catalysis 340, 10–16 (2016). doi: https://doi.org/10.1016/j.jcat.2016.05.002.
In situ X-ray observations of gas porosity interactions with dendritic microstructures during solidification of Al-based alloys. Murphy, A. G., Browne, D. J., Houltz, Y. & Mathiesen, R. H. 4th International Conference on Advances in Solidification Processes (ICASP-4) - 117, 012067–1-012067–6 (2016). doi: https://doi.org/10.1088/1757-899X/117/1/012067.
Solid-supported lipid multilayers under high hydrostatic pressure. Nowak, B., Paulus, M., Nase, J., Salmen, P., Degen, P., Wirkert, F. J., Honkimäki, V. & Tolan, M. Langmuir 32, 2638–2643 (2016). doi: https://doi.org/10.1021/acs.langmuir.5b04554.
Maximising electro-mechanical response by minimising grain-scale strain heterogeneity in phase-change actuator ceramics. Oddershede, J., Hossain, M. J. & Daniels, J. E. Applied Physics Letters 109, 092901–1-092901–5 (2016). doi: https://doi.org/10.1063/1.4961533.
Structure reinvestigation of alpha-, beta- and gamma-In2S3. Pistor, P., Alvarez, J. M. M., Leon, M., di Michiel, M., Schorr, S., Klenk, R. & Lehmann, S. Acta Crystallographica Section B-structural Science Crystal Engineering and Materials 72, 410–415 (2016). doi: https://doi.org/10.1107/S2052520616007058.
Intergranular damage during stress relaxation in AISI 316L-type austenitic stainless steels: Effect of carbon, nitrogen and phosphorus contents. Pommier, H., Busso, E. P., Morgeneyer, T. F. & Pineau, A. Acta Materialia 103, 893–908 (2016). doi: https://doi.org/10.1016/j.actamat.2015.11.004.
Size of Au-nanoparticles supported on mesostructural cellular foams studied by the pair distribution function technique. Poulain, A., Sobczak, I. & Ziolek, M. Crystal Growth & Design 16, 5985–5993 (2016). doi: https://doi.org/10.1021/acs.cgd.6b01029.
Stress-modulated relaxor-to-ferroelectric transition in lead-free (Na1/2Bi1/2)TiO3−BaTiO3 ferroelectrics. Schader, F. H., Wang, Z., Hinterstein, M., Daniels, J. E. & Webber, K. G. Physical Review B 93, 134111–1-134111–11 (2016). doi: https://doi.org/10.1103/PhysRevB.93.134111.
Influence of the Oxygen Partial Pressure on the Phase Evolution During Bi-2212 Wire Melt Processing. Scheuerlein, C., Andrieux, J., Rikel, M. O., Kadar, J., Doerrer, C., Di Michiel, M., Ballarino, A., Bottura, L., Jiang, J., Kametani, F., Hellstrom, E. E. & Larbalestier, D. C. Ieee Transactions on Applied Superconductivity 26, 6400304 (2016). doi: https://doi.org/10.1109/TASC.2016.2533574.
In-situ small angle X-ray scattering study of ω particles growth kinetics in Ti - 15 wt.%Mo. 13th World Conference on Titanium -, Smilauerová, J., Holý, V., Harcuba, P., Kriegner, D. & Janecek, M., in ed. Venkatesh, V., Pilchak, A. L., Allison, J. E., Ankem, S., Boyer, R., Christodoulou, J., Fraser, H. L., Imam, M. A., Kosaka, Y., Rack, H. J., Chatterjee, A. & Woodfield, A., 609–613. (2016). doi: https://doi.org/10.1002/9781119296126.ch100.
Stochastic modeling of individual grain behavior during Ostwald ripening at ultra-high volume fractions of the coarsening phase. Spettl, A., Werz, T., Krill III, C. E. & Schmidt, V. Computational Materials Science 124, 290–303 (2016). doi: https://doi.org/10.1016/j.commatsci.2016.07.031.
Rupture of intermetallic networks and strain localization in cast AlSi12Ni alloy: 2D and 3D characterization. Tireira, A., Requena, G., Sao Jao, S., Borbély, A. & Klocker, H. Acta Materialia 112, 162–170 (2016). doi: https://doi.org/10.1016/j.actamat.2016.04.020.
Interlaced X-ray diffraction computed tomography. Vamvakeros, A., Jacques, S. D. M., Di Michiel, M., Senecal, P., Middelkoop, V., Cernik, R. J. & Beale, A. M. Journal of Applied Crystallography 49, 485–496 (2016). doi: https://doi.org/10.1107/S160057671600131X.
A crosstalk and non-uniformity correction method for the space-borne Compton polarimeter POLAR. Xiao, H., Hajdas, W., Wu, B., Produit, N., Bao, T., Batsch, T., Cadoux, F., Chai, J., Dong, Y., Kong, M., Kong, S., Rybka, D. K., Leluc, C., Li, L., Liu, J., Liu, X., Marcinkowski, R., Paniccia, M., Pohl, M., Rapin, D., Shi, H., Song, L., Sun, J., Szabelski, J., Wang, R., Wen, X., Xu, H., Zhang, L., Li., Z., Zhang, S., Zhang, X., Zhang, Y. & Zwolinska, A. Astroparticle Physics 83, 6–12 (2016). doi: https://doi.org/10.1016/j.astropartphys.2016.06.007.
Hard X-ray polarimetry with Caliste, a high performance CdTe based imaging spectrometer. Antier, S., Ferrando, P., Limousin, O., Caroli, E., da Silva R.M., C., Blondel, C., Chipaux, R., Honkimäki, V., Horeau, B., Laurent, P., Maia, J. M., Meuris, A., Del Sordo, S. & Stephen, J. B. Experimental Astronomy 39, 233–258 (2015). doi: https://doi.org/10.1007/s10686-015-9442-5.
Fine pitch CdTe-based hard-X-ray polarimeter performance for space science in the 70-300keV energy range. Antier, S., Limousin, O. & Ferrando, P. Nuclear Instruments and Methods in Physics Research A 787, 297–301 (2015). doi: https://doi.org/10.1016/j.nima.2014.12.085.
Detecting the Genesis of a High-Performance Carbon-Supported Pd Sulfide Nanophase and Its Evolution in the Hydrogenation of Butadiene. Bachiller-Baeza, B., Iglesias-Juez, A., Castillejos-Lopez, E., Guerrero-Ruiz, A., Di Michiel, M., Fernandez-Garcia, M. & Rodriguez-Ramos, I. Acs Catalysis 5, 5235–5241 (2015). doi: https://doi.org/10.1021/acscatal.5b00896.
Ion implantation for manufacturing bent and periodically bent crystals. Bellucci, V., Camattari, R., Guidi, V., Mazzolari, A., Paternò, G., Mattei, G., Scian, C. & Lanzoni, L. Applied Physics Letters 107, 064102–1-064102–5 (2015). doi: https://doi.org/10.1063/1.4928553.
Strain induced irreversible critical current degradation in highly dense Bi-2212 round wire. Bjoerstad, R., Scheuerlein, C., Rikel, M. O., Ballarino, A., Bottura, L., Jiang, J., Matras, M., Sugano, M., Hudspeth, J. & Di Michiel, M. Superconductor Science & Technology 28, 062002 (2015). doi: https://doi.org/10.1088/0953-2048/28/6/062002.
X-ray characterization of curved crystals for hard x-ray astronomy. EUV and X-ray Optics: Synergy between Laboratory and Space IV -, Buffagni, E., Bonnini, E., Ferrari, C., Virgilli, E. & Frontera, F., in 951006–1-951006–10. (2015). doi: https://doi.org/10.1117/12.2179058.
The 'quasi-mosaic' effect in crystals and its applications in modern physics. Camattari, R., Guidi, V., Bellucci, V. & Mazzolari, A. Journal of Applied Crystallography 48, 977–989 (2015). doi: https://doi.org/10.1107/S1600576715009875.
Effect of viscosity on cavity growth in ductile damage. Fabrègue, D., Bouaziz, O. & Maire, E. Mechanics of Materials 89, 169–175 (2015). doi: https://doi.org/10.1016/j.mechmat.2015.06.007.
In-operando high-speed tomography of lithium-ion batteries during thermal runaway. Finegan, D. P., Scheel, M., Robinson, J. B., Tjaden, B., Hunt, I., Mason, T. J., Millichamp, J., Di Michiel, M., Offer, G. J., Hinds, G., Brett, D. J. L. & Shearing, P. R. Nature Communications 6, 6924 (2015). doi: https://doi.org/10.1038/ncomms7924.
Probing the structure of a liquid metal during vitrification. Georgarakis, K., Hennet, L., Evangelakis, G. A., Antonowicz, J., Bokas, G. B., Honkimäki, V., Bytchkov, A., Chen, M. W. & Yavari, A. R. Acta Materialia 87, 174–186 (2015). doi: https://doi.org/10.1016/j.actamat.2015.01.005.
Order and melting in self-assembled alkanol monolayers on amorphous SiO2. Haddad, J., Steinrück, H. G., Hlaing, H., Kewalramani, S., Pontoni, D., Reichert, H., Murphy, B. M., Festersen, S., Runge, B., Magnussen, O. M., Magerl, A., Deutsch, M. & Ocko, B. M. Journal of Physical Chemistry C 119, 17648–17654 (2015). doi: https://doi.org/10.1021/acs.jpcc.5b03554.
X-Ray Diffraction Computed Tomography for Structural Analysis of Electrode Materials in Batteries. Jensen, K. M. O., Yang, X. H., Laveda, J. V., Zeier, W. G., See, K. A., Di Michiel, M., Melot, B. C., Corr, S. A. & Billinge, S. J. L. Journal of the Electrochemical Society 162, A1310–A1314 (2015). doi: https://doi.org/10.1149/2.0771507jes.
In situ X-ray diffraction monitoring of a mechanochemical reaction reveals a unique topology metal-organic framework. Katsenis, A. D., Puškarić, A., Štrukil, V., Mottillo, C., Julien, P. A., Užarević, K., Pham, M.-H., Do, T.-O., Kimber, S. A. J., Lazić, P., Magdysyuk, O., Dinnebier, R. E., Halasz, I. & Friščić, T. Nature Communications 6, 6662 (2015). .
Measuring overload effects during fatigue crack growth in bainitic steel by synchrotron X-ray diffraction. Lopez-Crespo, P., Steuwer, A., Buslaps, T., Tai, Y. H., Lopez-Moreno, A., Yates, J. R. & Withers, P. J. International Journal of Fatigue 71, 11–16 (2015). doi: https://doi.org/10.1016/j.ijfatigue.2014.03.015.
Structural changes in liquid Fe and Fe-B alloy on cooling. Louzguine-Luzgin, D. V., Georgarakis, K., Tsarkov, A., Solonin, A., Honkimäki, V., Hennet, L. & Yavari, A. R. Journal of Molecular Liquids 209, 233–238 (2015). doi: https://doi.org/10.1016/j.molliq.2015.05.062.
A first principles molecular dynamics study of the relationship between atomic structure and elastic properties of Mg-Zn-Ca amorphous alloys. Mahjoub, R., Laws, K. J., Scicluna, J. P., Daniels, J. E. & Ferry, M. Computational Materials Science 96, 246–255 (2015). doi: https://doi.org/10.1016/j.commatsci.2014.09.019.
Manufacturing of advanced bent crystals for Laue Optics for Gamma ObservationS (LOGOS). Mazzolari, A., Camattari, R., Bellucci, V., Paternò, G., Scian, C., Mattei, G. & Guidi, V. Nuclear Instruments and Methods in Physics Research B 355, 297–300 (2015). doi: https://doi.org/10.1016/j.nimb.2015.03.048.
Solid-liquid interfaces of ionic liquid solutions-Interfacial layering and bulk correlations. Mezger, M., Roth, R., Schröder, H., Reichert, P., Pontoni, D. & Reichert, H. Journal of Chemical Physics 142, 164707–1-164707–8 (2015). doi: https://doi.org/10.1063/1.4918742.
Ultra-fast in-situ X-ray studies of evolving columnar dendrites in solidifying steel weld pools. Mirihanage, W. U., Di Michiel, M. & Mathiesen, R. H. Mcwasp Xiv: International Conference on Modelling of Casting, Welding and Advanced Solidification Processes 84, 012029 (2015). doi: https://doi.org/10.1088/1757-899X/84/1/012029.
The influence of constitutive material models on accumulated plastic strain in finite element weld analyses. Muránsky, O., Hamelin, C. J., Patel, V. I., Luzin, V. & Braham, C. International Journal of Solids and Structures 69-70, 518–530 (2015). doi: https://doi.org/10.1016/j.ijsolstr.2015.04.032.
Real time in situ x-ray diffraction study of the high temperature mechanical behavior of a rafted single crystal superalloy. TMS 2105 - 144th Annual meeting & exhibition -, Schenk, T., Jacques, A., Le Graverend, J. B. & Cormier, J., in 1291–1298. (2015). .
In situ tomographic investigation of damage development in ±45° carbon fibre reinforced laminates. Sket, F., Rodríguez-Hortalá, M., Molina-Aldareguía, J. M., Llorca, J., Maire, E. & Requena, G. Materials Science and Technology 31, 587–593 (2015). doi: https://doi.org/10.1179/1743284714Y.0000000561.
Growth kinetics of ω particles in β-Ti matrix studied by in situ small-angle X-ray scattering. Smilauerová, J., Harcuba, P., Kriegner, D., Janeček, M. & Holý, V. Acta Materialia 100, 126–134 (2015). doi: https://doi.org/10.1016/j.actamat.2015.08.014.
Stochastic 3D modeling of Ostwald ripening at ultra-high volume fractions of the coarsening phase. Spettl, A., Wimmer, R., Werz, T., Heinze, M., Odenbach, S., Krill III, C. E. & Schmidt, V. Modelling and Simulation in Materials Science and Engineering 23, 065001–1-065001–21 (2015). doi: https://doi.org/10.1088/0965-0393/23/6/065001.
Detection and characterization of nanoparticles in suspension at low concentrations using the X-ray total scattering pair distribution function technique. Terban, M. W., Johnson, M., Di Michiel, M. & Billinge, S. J. L. Nanoscale 7, 5480–5487 (2015). doi: https://doi.org/10.1039/c4nr06486k.
Density driven structural transformations in amorphous semiconductor clathrates. Tulk, C. A., Dos Santos, A. M., Neuefeind, J. C., Molaison, J. J., Sales, B. C. & Honkimäki, V. Applied Physics Letters 106, 021911–1-021911–5 (2015). doi: https://doi.org/10.1063/1.4905224.
Removing multiple outliers and single-crystal artefacts from X-ray diffraction computed tomography data. Vamvakeros, A., Jacques, S. D. M., Di Michiel, M., Middelkoop, V., Egan, C. K., Cernik, R. J. & Beale, A. M. Journal of Applied Crystallography 48, 1943–1955 (2015). doi: https://doi.org/10.1107/S1600576715020701.
Real time chemical imaging of a working catalytic membrane reactor during oxidative coupling of methane. Vamvakeros, A., Jacques, S. D. M., Middelkoop, V., Di Michiel, M., Egan, C. K., Ismagilov, I. Z., Vaughan, G. B. M., Gallucci, F., Annaland, M. V., Shearing, P. R., Cernik, R. J. & Beale, A. M. Chemical Communications 51, 12752–12755 (2015). doi: https://doi.org/10.1039/c5cc03208c.
Real time chemical imaging of a working catalytic membrane reactor during oxidative coupling of methane. Vamvakeros, A., Jacques, S. D. M., Middelkoop, V., Di Michiel, M., Egan, C. K., Ismagilov, I. Z., Vaughan, G. B. M., Gallucci, F., van Sint Annaland M., Shearing, P. R., Cernik, R. J. & Beale, A. M. Chemical Communications 51, 12752–12755 (2015). doi: https://doi.org/10.1039/C5CC03208C.
Rietveld analysis of computed tomography and its application to methanol to olefin reactor beds. Wragg, D. S., O'Brien, M. G., Di Michiel, M. & Lonstad-Bleken, F. Journal of Applied Crystallography 48, 1719–1728 (2015). doi: https://doi.org/10.1107/S1600576715017288.
Experimental evidence of planar channeling in a periodically bent crystal. Bagli, E., Bandiera, L., Bellucci, V., Berra, A., Camattari, R., De Salvador, D., Germogli, G., Guidi, V., Lanzoni, L., Lietti, D., Mazzolari, A., Prest, M., Tikhomirov, V. V. & Vallazza, E. European Physical Journal C 74, 3114–1-3114–7 (2014). doi: https://doi.org/10.1140/epjc/s10052-014-3114-x.
Chemical imaging of the sulfur-induced deactivation of Cu/ZnO catalyst bodies. Beale, A. M., Gibson, E. K., O'Brien, M. G., Jacques, S. D. M., Cernik, R. J., Di Michiel, M., Cobden, P. D., Pirgon-Galin, O., van de Water, L., Watson, M. J. & Weckhuysen, B. M. Journal of Catalysis 314, 94–100 (2014). doi: https://doi.org/10.1016/j.jcat.2014.04.007.
Progress towards five dimensional diffraction imaging of functional materials under process conditions. Beale, A. M., Jacques, S. D. M., Gibson, E. K. & Di Michiel, M. Coordination Chemistry Reviews 277, 208–223 (2014). doi: https://doi.org/10.1016/j.ccr.2014.05.008.
Demonstration of multilayer reflective optics at photon energies above 0.6 MeV. Brejnholt, N. F., Soufli, R., Descalle, M. A., Fernández-Perea, M., Christensen, F. E., Jakobsen, A. C., Honkimäki, V. & Pivovaroff, M. J. Optics Express 22, 15364–15369 (2014). doi: https://doi.org/10.1364/OE.22.015364.
High diffraction efficiency with hard X-rays through a thick silicon crystal bent by carbon fiber deposition. Camattari, R., Dolcini, E., Bellucci, V., Mazzolari, A. & Guidi, V. Journal of Applied Crystallography 47, 1762–1764 (2014). doi: https://doi.org/10.1107/S1600576714018834.
High-efficiency focusing of hard X-rays exploiting the quasi-mosaic effect in a bent germanium crystal. Camattari, R., Paterno, G., Battelli, A., Bellucci, V., Bastie, P. & Guidi, V. Journal of Applied Crystallography 47, 799–802 (2014). doi: https://doi.org/10.1107/S1600576714005056.
Characterization of ductile damage for a high carbon steel using 3D X-ray micro-tomography and mechanical tests - Application to the identification of a shear modified GTN model. Cao, T. S., Maire, E., Verdu, C., Bobadilla, C., Lasne, P., Montmitonnet, P. & Bouchard, P. O. Computational Materials Science 84, 175–187 (2014). doi: https://doi.org/10.1016/j.commatsci.2013.12.006.
Interface and in bulk residual stress analysis in biomedical systems by non-destructive techniques. Carradó, A. & Palkowski, H. Surface & Coatings Technology 243, 10–14 (2014). doi: https://doi.org/10.1016/j.surfcoat.2012.02.009.
Two-step polarization reversal in biased ferroelectrics. Daniels, J. E., Cozzan, C., Ukritnukun, S., Tutuncu, G., Andrieux, J., Glaum, J., Dosch, C., Jo, W. & Jones, J. L. Journal of Applied Physics 115, 224104–1-224104–5 (2014). doi: https://doi.org/10.1063/1.4881835.
X-ray diffraction efficiency of bent GaAs mosaic crystals for the Laue project. Ferrari, C., Buffagni, E., Bonnini, E. & Zappettini, A. Optical Engineering 53, 047104–1-047104–5 (2014). doi: https://doi.org/10.1117/1.OE.53.4.047104.
Revealing the Dynamic Structure of Complex Solid Catalysts Using Modulated Excitation X-ray Diffraction. Ferri, D., Newton, M. A., Di Michiel, M., Chiarello, G. L., Yoon, S., Lu, Y. & Andrieux, J. Angewandte Chemie-international Edition 53, 8890–8894 (2014). doi: https://doi.org/10.1002/anie.201403094.
Pass-by-pass stress evolution in multipass welds. Gao, H., Dutta, R. K., Huizenga, R. M., Amirthalingam, M., M.J.M., H., Buslaps, T. & Richardson, I. M. Science and Technology of Welding and Joining 19, 256–264 (2014). doi: https://doi.org/10.1179/1362171813Y.0000000191.
Stress relaxation due to ultrasonic impact treatment on multi-pass welds. Gao, H., Dutta, R. K., Huizenga, R. M., Amirthalingam, M., M.J.M., H., Buslaps, T. & Richardson, I. M. Science and Technology of Welding and Joining 19, 505–513 (2014). doi: https://doi.org/10.1179/1362171814Y.0000000219.
Residual stress measurements in multi-pass welded high strength steel using energy dispersive synchrotron X-ray diffraction. Gao, H., Huizenga, R. M., Dutta, R. K., Amirthalingam, M., M.J.M., H., Buslaps, T. & Richardson, I. M. 8th International Conference on Processing and Manufacturing of Advanced Materials – THERMEC’2013 - 922, 177–182 (2014). doi: https://doi.org/10.4028/www.scientific.net/AMR.922.177.
Real time monitoring of phase transformation and strain evolution in LTT weld filler material using EDXRD. Gibmeier, J., Held, E., Altenkirch, J., Kromm, A., Kannengiesser, T. & Buslaps, T. Journal of Materials Processing Technology 214, 2739–2747 (2014). doi: https://doi.org/10.1016/j.jmatprotec.2014.06.008.
Microstructure observation and quantification of the liquid fraction of M2 steel grade in the semi-solid state, combining confocal laser scanning microscopy and X-ray microtomography. Gu, G. C., Pesci, R., Langlois, L., Becker, E., Bigot, R. & Guo, M. X. Acta Materialia 66, 118–131 (2014). doi: https://doi.org/10.1016/j.actamat.2013.11.075.
Microyielding of Core-Shell Crystal Dendrites in a Bulk-metallic-glass Matrix Composite. Huang, E. W., Qiao, J. W., Winiarski, B., Lee, W. J., Scheel, M., Chuang, C. P., Liaw, P. K., Lo, Y. C., Zhang, Y. & Di Michiel, M. Scientific Reports 4, 4394 (2014). doi: https://doi.org/10.1038/srep04394.
Probing the strain distribution within a single crystal superalloy during high temperature testing. Jacques, A., Biskri, M., Schenk, T., Chateau-Cornu, J. P. & Bastie, P. MATEC Web of Conferences 14, 05004–1-05004–6 (2014). doi: https://doi.org/10.1051/matecconf/20141405004.
Assessing dislocation densities in the gamma prime phase of a superalloy from high resolution diffraction peak shape. Jacques, A., Dirand, L., Chateau-Cornu, J. P., Schenk, T. & Bastie, P. Materials Science Forum 783-786, 789–794 (2014). doi: https://doi.org/10.4028/www.scientific.net/MSF.783-786.789.
Morphological and structural behavior of TiO2 nanoparticles in the presence of WO3: crystallization of the oxide composite system. Kubacka, A., Iglesias-Juez, A., di Michiel, M., Becerro, A. I. & Fernandez-Garcia, M. Physical Chemistry Chemical Physics 16, 19540–19549 (2014). doi: https://doi.org/10.1039/c4cp02181a.
A 3D CZT high resolution detector for x- and gamma-ray astronomy. in [Formatter not found: BookTitle] High Energy, Optical, and Infrared Detectors for Astronomy VI -, Kuvvetli, I., Budtz-Jørgensen, C., Zappettini, A., Zambelli, N., Benassi, G., Kalemci, E., Caroli, E., Stephen, J. B. & Auricchio, N. (2014). 9154, 91540X-1–91540X-10. doi: https://doi.org/10.1117/12.2055119.
Isotropic round-wire multifilament cuprate superconductor for generation of magnetic fields above 30 T. Larbalestier, D. C., Jiang, J., Trociewitz, U. P., Kametani, F., Scheuerlein, C., Dalban-Canassy, M., Matras, M., Chen, P., Craig, N. C., Lee, P. J. & Hellstrom, E. E. Nature Materials 13, 375–381 (2014). doi: https://doi.org/10.1038/nmat3887.
Heterogenous void growth revealed by in situ 3-D X-ray microtomography using automatic cavity tracking. Lecarme, L., Maire, E., K.C.A., K., De Vleeschouwer, C., Jacques, L., Simar, A. & Pardoen, T. Acta Materialia 63, 130–139 (2014). doi: https://doi.org/10.1016/j.actamat.2013.10.014.
Untangling dislocation and grain boundary mediated plasticity in nanocrystalline nickel. Lohmiller, J., Grewer, M., Braun, C., Kobler, A., Kübel, C., Schüler, K., Honkimäki, V., Hahn, H., Kraft, O., Birringer, R. & Gruber, P. A. Acta Materialia 65, 295–307 (2014). doi: https://doi.org/10.1016/j.actamat.2013.10.071.
Ageing induced improvement of methane oxidation activity of Pd/YFeO3. Lu, Y., Keav, S., Marchionni, V., Chiarello, G. L., Pappacena, A., Di Michiel, M., Newton, M. A., Weidenkaff, A. & Ferri, D. Catalysis Science & Technology 4, 2919–2931 (2014). doi: https://doi.org/10.1039/c4cy00289j.
Imaging the continuous hydrothermal flow synthesis of nanoparticulate CeO2 at different supercritical water temperatures using in situ angle-dispersive diffraction. Middelkoop, V., Tighe, C. J., Kellici, S., Gruar, R. I., Perkins, J. M., S.D.M., J., Barnes, P. & Darr, J. A. Journal of Supercritical Fluids 87, 118–128 (2014). doi: https://doi.org/10.1016/j.supflu.2013.12.022.
Time-resolved X-ray diffraction studies of solidification microstructure evolution in welding. Mirihanage, W. U., Di Michiel, M., Reiten, A., Arnberg, L., Dong, H. B. & Mathiesen, R. H. Acta Materialia 68, 159–168 (2014). doi: https://doi.org/10.1016/j.actamat.2014.01.040.
Role of interface contact in CeO2-TiO2 photocatalytic composite materials. Muñoz-Batista, M. J., Gómez-Cerezo, M. N., Kubacka, A., Tudela, D. & Fernández-García, M. ACS Catalysis 4, 63–72 (2014). doi: https://doi.org/10.1021/cs400878b.
Finite element modelling of residual stresses in shot-peened steam turbine blades. Newby, M., James, M. N. & Hattingh, D. G. Fatigue and Fracture of Engineering Materials and Structures 37, 707–716 (2014). doi: https://doi.org/10.1111/ffe.12165.
Catalytic Adventures in Space and Time Using High Energy X-rays. Newton, M. A., Di Michiel, M., Ferri, D., Fernandez-Garcia, M., Beale, A. M., Jacques, S. D. M., Chupas, P. J. & Chapman, K. W. Catalysis Surveys from Asia 18, 134–148 (2014). doi: https://doi.org/10.1007/s10563-014-9173-z.
Investigation of residual stress/strain and texture in a large dissimilar metal weld using synchrotron radiation and neutrons. Ohms, C. & Martins, R. V. Materials Science Forum 772, 193–199 (2014). doi: https://doi.org/10.4028/www.scientific.net/MSF.772.193.
Characterization of the swelling during sintering of uniaxially pressed copper powders by in situ X-ray microtomography. Olmos, L., Bouvard, D., Salvo, L., Bellet, D. & Di Michiel, M. Journal of Materials Science 49, 4225–4235 (2014). doi: https://doi.org/10.1007/s10853-014-8117-3.
Exploiting coherence for real-time studies by single-bunch imaging. Rack, A., Scheel, M., Hardy, L., Curfs, C., Bonnin, A. & Reichert, H. Journal of Synchrotron Radiation 21, 815–818 (2014). doi: https://doi.org/10.1107/S1600577514005852.
Chemistry-dependent X-ray-induced surface charging. Salgin, B., Pontoni, D., Vogel, D., Schroder, H., Keil, P., Stratmann, M., Reichert, H. & Rohwerder, M. Physical Chemistry Chemical Physics 16, 22255–22261 (2014). doi: https://doi.org/10.1039/c4cp02295e.
Chemistry-dependent X-ray-induced surface charging. Salgin, B., Pontoni, D., Vogel, D., Schröder, H., Keil, P., Stratmann, M., Reichert, H. & Rohwerder, M. Physical Chemistry - Chemical Physics 16, 22255–22261 (2014). doi: https://doi.org/10.1039/C4CP02295E.
Texture in state-of-the-art Nb3Sn multifilamentary superconducting wires. Scheuerlein, C., Arnau, G., Alknes, P., Jimenez, N., Bordini, B., Ballarino, A., Di Michiel, M., Thilly, L., Besara, T. & Siegrist, T. Superconductor Science & Technology 27, 025013 (2014). doi: https://doi.org/10.1088/0953-2048/27/2/025013.
Stress distribution and lattice distortions in Nb3Sn multifilament wires under uniaxial tensile loading at 4.2 K. Scheuerlein, C., Di Michiel, M., Buta, F., Seeber, B., Senatore, C., Flukiger, R., Siegrist, T., Besara, T., Kadar, J., Bordini, B., Ballarino, A. & Bottura, L. Superconductor Science & Technology 27, 044021 (2014). doi: https://doi.org/10.1088/0953-2048/27/4/044021.
Role of the Li+ node in the Li-BH4 substructure of double-cation tetrahydroborates. Schouwink, P., Smrcok, L. & Cerný, R. Acta Crystallographica B 70, 871–878 (2014). doi: https://doi.org/10.1107/S2052520614017351.
Nanoscale Structure of Si/SiO2/Organics Interfaces. Steinruck, H. G., Schiener, A., Schindler, T., Will, J., Magerl, A., Konovalov, O., Li Destri, G., Seeck, O. H., Mezger, M., Haddad, J., Deutsch, M., Checco, A. & Ocko, B. M. Acs Nano 8, 12676–12681 (2014). doi: https://doi.org/10.1021/nn5056223.
Synchrotron X-ray imaging for crystal growth studies. Baruchel, J., Di Michiel, M., Lafford, T., Lhuissier, P., Meyssonnier, J., Henri, N. T., Philip, A., Pernot, P., Salvo, L. & Scheel, M. Comptes Rendus Physique 14, 208–220 (2013). doi: https://doi.org/10.1016/j.crhy.2012.10.010.
Calculation of diffraction efficiency for curved crystals with arbitrary curvature radius. Bellucci, V., Guidi, V., Camattari, R. & Neri, I. Journal of Applied Crystallography 46, 415–420 (2013). doi: https://doi.org/10.1107/S0021889813000162.
Finite element modeling of the inertia friction welding of dissimilar high-strength steels. Bennett, C. J., Attallah, M. M., Preuss, M., Shipway, P. H., Hyde, T. H. & Bray, S. Metallurgical and Materials Transactions A 44, 5054–5064 (2013). doi: https://doi.org/10.1007/s11661-013-1852-2.
Mechanisms behind sulfur promoted oxidation of methane. Bounechada, D., Fouladvand, S., Kylhammar, L., Pingel, T., Olsson, E., Skoglundh, M., Gustafson, J., Di Michiel, M., Newton, M. A. & Carlsson, P. A. Physical Chemistry Chemical Physics 15, 8648–8661 (2013). doi: https://doi.org/10.1039/c3cp44289f.
Crystal bending by surface damaging in mosaic GaAs crystals for the LAUE project. Buffagni, E., Bonnini, E., Zappettini, A., Guadalupi, G. M., Rossi, F. & Ferrari, C., in 88610E-1–88610E-7. (2013). doi: https://doi.org/10.1117/12.2024546.
High resolution 3D imaging of bump-bonds by means of synchrotron radiation computed laminography. Cecilia, A., Hamann, E., Koenig, T., Xu, F., Cheng, Y., Helfen, L., Ruat, M., Scheel, M., Zuber, M., Baumbach, T., Fauler, A. & Fiederle, M. 15th International Workshop on Radiation Imaging Detectors (IWORID2013) - 8, C12029–1-C12029–8 (2013). doi: https://doi.org/10.1088/1748-0221/8/12/C12029.
Structure and activity of iron-doped TiO2-anatase nanomaterials for gas-phase toluene photo-oxidation. Christoforidis, K. C., Iglesias-Juez, A., Figueroa, S. J. A., Di Michiel, M., Newton, M. A. & Fernandez-Garcia, M. Catalysis Science & Technology 3, 626–634 (2013). doi: https://doi.org/10.1039/c2cy20405c.
An X-ray chamber for in situ structural studies of solvent-mediated nanoparticle self-assembly. D.C.E., C., Pontoni, D., Daillant, J. & Reichert, H. Journal of Synchrotron Radiation 20, 306–315 (2013). doi: https://doi.org/10.1107/S0909049513001143.
Mechanical double loop behavior in BaTiO3: Stress induced paraelastic to ferroelastic phase transformation. Daniels, J. E., Picht, G., Kimber, S. & Webber, K. G. Applied Physics Letters 103, 122902–1-122902–4 (2013). doi: https://doi.org/10.1063/1.4821446.
Characterization of localized phenomena. Full-Field Measurements and Identification in Solid Mechanics, Desrues, J. & Réthoré, J., in ed. Grédiac, M., Hild, F. & Pineau, A., 379–409. (2013). doi: https://doi.org/10.1002/9781118578469.ch14.
Time-lapse, three-dimensional in situ imaging of ice crystal growth in a colloidal silica suspension. Deville, S., Adrien, J., Maire, E., Scheel, M. & Di Michiel, M. Acta Materialia 61, 2077–2086 (2013). doi: https://doi.org/10.1016/j.actamat.2012.12.027.
Phase-specific high temperature creep behaviour of a pre-rafted Ni-based superalloy studied by X-ray synchrotron diffraction. Dirand, L., Jacques, A., Chateau-Cornu, J. P., Schenk, T., Ferry, O. & Bastie, P. Philosophical Magazine 93, 1384–1412 (2013). doi: https://doi.org/10.1080/14786435.2012.746794.
What we can learn from magnetic Compton scattering: Application to the determination of spin polarization. Duffy, J. A. Journal of Physics : Conference Series 443, 012011–1-012011–6 (2013). doi: https://doi.org/10.1088/1742-6596/443/1/012011.
Influence of phase contrast and detector resolution on the segmentation of tomographic images containing voids. Dzieciol, K., Borbely, A. & Scheel, M. 11th International Conference on Synchrotron Radiation Instrumentation (sri 2012) 425, UNSP 192005 (2013). doi: https://doi.org/10.1088/1742-6596/425/19/192005.
Non-invasive imaging of the crystalline structure within a human tooth. Egan, C. K., Jacques, S. D. M., Di Michiel, M., Cai, B. A., Zandbergen, M. W., Lee, P. D., Beale, A. M. & Cernik, R. J. Acta Biomaterialia 9, 8337–8345 (2013). doi: https://doi.org/10.1016/j.actbio.2013.06.018.
Physics of reflective optics for the soft gamma-ray photon energy range. Fernández-Perea, M., Descalle, M. A., Soufli, R., Ziock, K. P., Alameda, J., Baker, S. L., McCarville, T. J., Honkimäki, V., Ziegler, E., Jakobsen, A. C., Christensen, F. E. & Pivovaroff, M. J. Physical Review Letters 111, 027404–1-027404–5 (2013). doi: https://doi.org/10.1103/PhysRevLett.111.027404.
Ultra-short-period WC/SiC multilayer coatings for x-ray applications. Fernández-Perea, M., Pivovaroff, M. J., Soufli, R., Alameda, J., Mirkarimi, P., Descalle, M. A., Baker, S. L., McCarville, T., Ziock, K., Hornback, D., Romaine, S., Bruni, R., Zhong, Z., Honkimäki, V., Ziegler, E., Christensen, F. E. & Jakobsen, A. C. Nuclear Instruments and Methods in Physics Research A 710, 114–119 (2013). doi: https://doi.org/10.1016/j.nima.2012.10.066.
Curved focusing crystals for hard X-ray astronomy. Ferrari, C., Buffagni, E., Bonnini, E. & Korytár, D. Crystallography Reports 58, 1058–1062 (2013). doi: https://doi.org/10.1134/S1063774513070079.
High diffraction efficiency in crystals curved by surface damage. Ferrari, C., Buffagni, E., Bonnini, E. & Korytár, D. Journal of Applied Crystallography 46, 1576–1581 (2013). doi: https://doi.org/10.1107/S0021889813022954.
X-ray diffraction efficiency of bent GaAs mosaic crystals for the LAUE project. Ferrari, C., Buffagni, E., Bonnini, E. & Zappettini, A., in 88610D-88610D-9. (2013). doi: https://doi.org/10.1117/12.2024517.
Synchrotron high energy X-ray methods coupled to phase sensitive analysis to characterize aging of solid catalysts with enhanced sensitivity. Ferri, D., Newton, M. A., Di Michiel, M., Yoon, S., Chiarello, G. L., Marchionni, V., Matam, S. K., Aguirre, M. H., Weidenkaff, A., Wen, F. & Gieshoff, J. Physical Chemistry Chemical Physics 15, 8629–8639 (2013). doi: https://doi.org/10.1039/c3cp44638g.
Innovative insights in a plug flow microreactor for operando X-ray studies. Figueroa, S. J. A., Gibson, D., Mairs, T., Pasternak, S., Newton, M. A., Di Michiel, M., Andrieux, J., Christoforidis, K. C., Iglesias-Juez, A., Fernandez-Garcia, M. & Prestipino, C. Journal of Applied Crystallography 46, 1523–1527 (2013). doi: https://doi.org/10.1107/S0021889813018839.
Real-time and in situ monitoring of mechanochemical milling reactions. Friščić, T., Halasz, I., Beldon, P. J., Belenguer, A. M., Adams, F., Kimber, S. A. J., Honkimäki, V. & Dinnebier, R. E. Nature Chemistry 5, 145 (2013). .
Temperature-dependent strain localization and texture evolution of highly nanotwinned Cu. Furnish, T. A., Lohmiller, J., Gruber, P. A., Barbee, T. W. & Hodge, A. M. Applied Physics Letters 103, 011904–1-011904–4 (2013). doi: https://doi.org/10.1063/1.4812975.
Structure and Volta Potential of Lipid Multilayers: Effect of X-ray Irradiation. Ghosh, S. K., Salgin, B., Pontoni, D., Reusch, T., Keil, P., Vogel, D., Rohwerder, M., Reichert, H. & Saldittt, T. Langmuir 29, 815–824 (2013). doi: https://doi.org/10.1021/la304139w.
Noninvasive Spatiotemporal Profiling of the Processes of Impregnation and Drying within Mo/Al2O3 Catalyst Bodies by a Combination of X-ray Absorption Tomography and Diagonal Offset Raman Spectroscopy. Gibson, E. K., Zandbergen, M. W., Jacques, S. D. M., Biao, C., Cernik, R. J., O'Brien, M. G., Di Michiel, M., Weckhuysen, B. M. & Beale, A. M. Acs Catalysis 3, 339–347 (2013). doi: https://doi.org/10.1021/cs300746a.
Application of X-ray microtomography to quantify the liquid fraction of M2 steel for semi-solid forming process. Gu, G., Pesci, R., Becker, E., Langlois, L. & Bigot, R. Key Engineering Materials 554-557, 547–552 (2013). doi: https://doi.org/10.4028/www.scientific.net/KEM.554-557.547.
Determination of quantity and localization of liquid in the semi-solid state using both 3D X-ray microtomography and 2D techniques for steel thixoforming. Gu, G., Pesci, R., Becker, E., Langlois, L. & Bigot, R. Solid State Phenomena 192-193, 191–196 (2013). doi: https://doi.org/10.4028/www.scientific.net/SSP.192-193.191.
Curved crystals for high-resolution focusing of X and gamma rays through a Laue lens. Guidi, V., Bellucci, V., Camattari, R. & Neri, I. Nuclear Instruments and Methods in Physics Research B 309, 249–253 (2013). doi: https://doi.org/10.1016/j.nimb.2013.01.070.
In situ and real-time monitoring of mechanochemical milling reactions using synchrotron X-ray diffraction. Halasz, I., Kimber, S. A. J., Beldon, P. J., Belenguer, A. M., Adams, F., Honkimäki, V., Nightingale, R. C., Dinnebier, R. E. & Friščić, T. Nature Protocols 8, 1718 (2013). .
Adsorption and microstructure of core-shell nanoparticles at liquid-liquid interfaces: An X-ray reflectivity study. Isa, L. Chimia 67 -, 297–297 (2013). doi: https://doi.org/10.2533/chimia.2013.297.
Core-shell nanoparticle monolayers at planar liquid-liquid interfaces: effects of polymer architecture on the interface microstructure. Isa, L., Calzolari, D. C. E., Pontoni, D., Gillich, T., Nelson, A., Zirbs, R., Sanchez-Ferrer, A., Mezzenga, R. & Reimhult, E. Soft Matter 9, 3789–3797 (2013). doi: https://doi.org/10.1039/c3sm27367a.
Observation of shear band formation in nanocrystalline Pd-Au alloy during in situ SEM compression testing. Ivanisenko, Y., Werz, T., Minkow, A., Lohmiller, J., Gruber, P. A., Kobler, A., Kurmanaeva, L. & Fecht, H. J. Journal of Materials Science 48, 6841–6847 (2013). doi: https://doi.org/10.1007/s10853-013-7490-7.
Structure of (FexCa1-xO)y(SiO2)1-y liquids and glasses from high-energy x-ray diffraction: Implications for the structure of natural basaltic magmas. J.W.E., D., Sanloup, C., Bytchkov, A., Brassamin, S. & Hennet, L. Physical Review B 87, 224201–1-224201–10 (2013). doi: https://doi.org/10.1103/PhysRevB.87.224201.
Variations of internal stresses within a rafted superalloy during high temperature mechanical testing: An in situ XRD study. Jacques, A., Dirand, L., Schenk, T., Chateau-Cornu, J. P., Ferry, O. & Bastie, P. MRS Proceedings 1528 -, 1–7 (2013). doi: https://doi.org/10.1557/opl.2013.365.
Pair distribution function computed tomography. Jacques, S. D. M., Di Michiel, M., Kimber, S. A. J., Yang, X. H., Cernik, R. J., Beale, A. M. & Billinge, S. J. L. Nature Communications 4, 2536 (2013). doi: https://doi.org/10.1038/ncomms3536.
Reduction of Gas Bubbles and Improved Critical Current Density in Bi-2212 Round Wire by Swaging. Jiang, J. Y., Miao, H. P., Huang, Y. B., Hong, S., Parrell, J. A., Scheuerlein, C., Di Michiel, M., Ghosh, A. K., Trociewitz, U. P., Hellstrom, E. E. & Larbalestier, D. C. Ieee Transactions on Applied Superconductivity 23, 6400206 (2013). doi: https://doi.org/10.1109/TASC.2013.2237873.
Time-dependent synchrotron X-ray diffraction on the austenite decomposition kinetics in SAE 52100 bearing steel at elevated temperatures under tensile stress. Jiménez-Melero, E., Blondé, R., Sherif, M. Y., Honkimäki, V. & van Dijk N.H. Acta Materialia 61, 1154–1166 (2013). doi: https://doi.org/10.1016/j.actamat.2012.10.025.
Influence of the Ce-Zr promoter on Pd behaviour under dynamic CO/NO cycling conditions: a structural and chemical approach. Kubacka, A., Iglesias-Juez, A., Di Michiel, M., Newton, M. A. & Fernandez-Garcia, M. Physical Chemistry Chemical Physics 15, 8640–8647 (2013). doi: https://doi.org/10.1039/c3cp44293d.
Experimental investigation of void coalescence in a dual phase steel using X-ray tomography. Landron, C., Bouaziz, O., Maire, E. & Adrien, J. Acta Materialia 61, 6821–6829 (2013). doi: https://doi.org/10.1016/j.actamat.2013.07.058.
4D damage characterization during superplastic deformation of magnesium alloys. Lhuissier, P., Scheel, M., Salvo, L., Boller, E., Di Michiel, M. & Blandin, J. J. Superplasticity in Advanced Materials 735, 61–+ (2013). doi: https://doi.org/10.4028/www.scientific.net/MSF.735.61.
Continuous characterization by X-ray microtomography of damage during high-temperature deformation of magnesium alloy. Lhuissier, P., Scheel, M., Salvo, L., Di Michiel, M. & Blandin, J. J. Scripta Materialia 69, 85–88 (2013). doi: https://doi.org/10.1016/j.scriptamat.2013.03.001.
Advanced materials characterization and modeling using synchrotron, neutron, TEM, and novel micro-mechanical techniques - A European effort to accelerate fusion materials development. Linsmeier, C., Fu, C. C., Kaprolat, A., Nielsen, S. F., Mergia, K., Schäublin, R., Lindau, R., Bolt, H., Buffière, J. Y., Caturla, M. J., Décamps, B., Ferrero, C., Greuner, H., Hébert, C., Höschen, T., Hofmann, M., Hugenschmidt, C., Jourdan, T., Köppen, M., Plocinski, T., Riesch, J., Scheel, M., Schillinger, B., Vollmer, A., Weitkamp, T., Yao, W., You, J. H. & Zivelonghi, A. Journal of Nuclear Materials 442, S834-S845 (2013). doi: https://doi.org/10.1016/j.jnucmat.2013.04.042.
Overload effects on fatigue crack-tip fields under plane stress conditions: surface and bulk analysis. Lopez-Crespo, P., Withers, P. J., Yusof, F., Dai, H., Steuwer, A., Kelleher, J. F. & Buslaps, T. Fatigue & Fracture of Engineering Materials & Structures 36, 75–84 (2013). doi: https://doi.org/10.1111/j.1460-2695.2012.01670.x.
An accidental visualization of the Brillouin zone in an Ni-W alloy via diffuse scattering. Maisel, S. B., Schindzielorz, N., Müller, S., Reichert, H. & Bosak, A. Journal of Applied Crystallography 46, 1211–1215 (2013). doi: https://doi.org/10.1107/S0021889813016270.
Evidence for length-dependent wire expansion, filament dedensification and consequent degradation of critical current density in Ag-alloy sheathed Bi-2212 wires. Malagoli, A., Lee, P. J., Ghosh, A. K., Scheuerlein, C., Di Michiel, M., Jiang, J., Trociewitz, U. P., Hellstrom, E. E. & Larbalestier, D. C. Superconductor Science & Technology 26, 055018 (2013). doi: https://doi.org/10.1088/0953-2048/26/5/055018.
Polyamorphism and liquid-liquid phase transitions in amorphous silicon and supercooled Al2O3-Y2O3 liquids. McMillan, P. F., Greaves, G. N., Wilson, M., Wilding, M. C. & Daisenberger, D., in 309–353. (2013). doi: https://doi.org/10.1002/9781118540350.ch12.
Time-resolved X-ray microtomography observation of intermetallic formation between solid Fe and liquid Al. Pasche, G., Scheel, M., Schäublin, R., Hébert, C., Rappaz, M. & Hessler-Wyser, A. Metallurgical and Materials Transactions A 44, 4119–4123 (2013). doi: https://doi.org/10.1007/s11661-013-1788-6.
In situ synchrotron tomography estimation of toughening effect by semi-ductile fibre reinforcement in a tungsten-fibre-reinforced tungsten composite system. Riesch, J., Buffiere, J. Y., Hoschen, T., di Michiel, M., Scheel, M., Linsmeier, C. & You, J. H. Acta Materialia 61, 7060–7071 (2013). doi: https://doi.org/10.1016/j.actamat.2013.07.035.
Mesoscopic structural organization in triphilic room temperature ionic liquids. Russina, O., Lo Celso, F., Di Michiel, M., Passerini, S., Appetecchi, G. B., Castiglione, F., Mele, A., Caminiti, R. & Triolo, A. Faraday Discussions 167, 499–513 (2013). doi: https://doi.org/10.1039/c3fd00056g.
Structure and density of molten fayalite at high pressure. Sanloup, C., J.W.E., D., Crépisson, C., Kono, Y., Park, C., McCammon, C., Hennet, L., Brassamin, S. & Bytchkov, A. Geochimica et Cosmochimica Acta 118, 118–128 (2013). doi: https://doi.org/10.1016/j.gca.2013.05.012.
Transformation Heat Treatment of Rapidly Quenched Nb3Al Precursor Monitored In Situ by High Energy Synchrotron Diffraction. Scheuerlein, C., Ballarino, A., Di Michiel, M., Jin, X., Takeuchi, T., Kikuchi, A., Tsuchiya, K., Nakagawa, K. & Nakamoto, T. Ieee Transactions on Applied Superconductivity 23, 6000604 (2013). doi: https://doi.org/10.1109/TASC.2012.2233257.
An in-situ high-energy X-ray diffraction study on the hot-deformation behavior of a β-phase containing TiAl alloy. Schmoelzer, T., Liss, K. D., Kirchlechner, C., Mayer, S., Stark, A., Peel, M. & Clemens, H. Intermetallics 39, 25–33 (2013). doi: https://doi.org/10.1016/j.intermet.2013.02.016.
Modeling of peritectic coupled growth in Cu-Sn alloys. Valloton, J., Dantzig, J. A., Plapp, M. & Rappaz, M. Acta Materialia 61, 5549–5560 (2013). doi: https://doi.org/10.1016/j.actamat.2013.05.011.
Synchrotron X-ray diffraction. Practical Residual Stress Measurement Methods, Withers, P. J., in ed. Schajer, G. S., 163–194. (2013). doi: https://doi.org/10.1002/9781118402832.ch7.
The fast Z-scan method for studying working catalytic reactors with high energy X-ray diffraction: ZSM-5 in the methanol to gasoline process. Wragg, D. S., Bleken, F. L., O'Brien, M. G., Di Michiel, M., Fjellvag, H. & Olsbye, U. Physical Chemistry Chemical Physics 15, 8662–8671 (2013). doi: https://doi.org/10.1039/c3cp44343d.
Particle and liquid motion in semi-solid aluminium alloys: A quantitative in situ microradioscopy study. Zabler, S., Ershov, A., Rack, A., Garcia-Moreno, F., Baumbach, T. & Banhart, J. Acta Materialia 61, 1244–1253 (2013). doi: https://doi.org/10.1016/j.actamat.2012.10.047.
Damage fluctuations in creep deformed copper studied with synchrotron X-ray microtomography. Abbasi, R., Renversade, L., Dzieciol, K., Borbély, A. & Kaysser-Pyzalla, A. R. International Journal of Materials Research 103, 228–233 (2012). doi: https://doi.org/10.3139/146.110662.
EDXRD setup for real time observation of a gas tungsten arc (GTA) welding process. Altenkirch, J., Gibmeier, J., Buslaps, T. & Honkimäki, V. Materials Science Forum 706-709, 1655–1660 (2012). doi: https://doi.org/10.4028/www.scientific.net/MSF.706-709.1655.
The role of residual stresses in the performance and durability of prestressing steel wires. Atienza, J. M., Ruiz-Hervias, J. & Elices, M. Experimental Mechanics 52, 881–893 (2012). doi: https://doi.org/10.1007/s11340-012-9597-1.
Microstructural and Residual Stress Development due to Inertia Friction Welding in Ti-6246. Attallah, M. M., Preuss, M., Boonchareon, C., Steuwer, A., Daniels, J. E., Hughes, D. J., Dungey, C. & Baxter, G. J. Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science 43A, 3149–3161 (2012). doi: https://doi.org/10.1007/s11661-012-1116-6.
Damage in dual phase steels and its constituents studied by X-ray tomography. Bareggi, A., Maire, E., Bouaziz, O. & Di Michiel, M. International Journal of Fracture 174, 217–227 (2012). doi: https://doi.org/10.1007/s10704-012-9692-4.
An eye on the inside: imaging of catalytic particles under reaction conditions. Beale, A. M., Jacques, S. D. M., O'Brien, M. G., Di Michiel, M. & Weckhuysen, B. M. Acta Crystallographica A-foundation and Advances 68, S44–S44 (2012). doi: https://doi.org/10.1107/S0108767312099163.
On the spontaneous formation of clathrate hydrates at water-guest interfaces. Boewer, L., Nase, J., Paulus, M., Lehmkühler, F., Tiemeyer, S., Holz, S., Pontoni, D. & Tolan, M. Journal of Physical Chemistry C 116, 8548–8553 (2012). doi: https://doi.org/10.1021/jp211784w.
Preparation of bent crystals as high-efficiency optical elements for hard x-ray astronomy. Buffagni, E., Ferrari, C., Rossi, F., Marchini, L. & Zappettini, A. Optical Engineering 51, 056501–1-056501–7 (2012). doi: https://doi.org/10.1117/1.OE.51.5.056501.
CdZnTe focal plane polarimetric performances for a Laue lens point spread function. de Campos J.B., da Silva R.M., C., Gloster, C. P., Pisa, A., Caroli, E., Stephen, J. B. & Frontera, F. IEEE Transactions on Nuclear Science 59, 1582–1590 (2012). doi: https://doi.org/10.1109/TNS.2012.2201752.
A 3D CZT hard x-ray polarimeter for a balloon-borne payload. in [Formatter not found: BookTitle] Space Telescopes and Instrumentation 2012: Ultraviolet to Gamma Ray -, Caroli, E., Alvarez, J. M., Auricchio, N., Budtz-Jørgensen, C., da Silva R.M., C., Del Sordo, S., Ferrando, P., Laurent, P., Limousin, O., Galvèz, J. L., Gloster, C. P., Hernanz, M., Isern, J., Kuvvetli, I., Maia, J. M., Meuris, A., Stephen, J. B. & Zappettini, A. (2012). 8443, 84434O-1–84434O-9. doi: https://doi.org/10.1117/12.928326.
A structural and surface approach to size and shape control of sulfur-modified undoped and Fe-doped TiO2 anatase nano-materials. Christoforidis, K. C., Iglesias-Juez, A., Figueroa, S. J. A., Newton, M. A., Di Michiel, M. & Fernandez-Garcia, M. Physical Chemistry Chemical Physics 14, 5628–5634 (2012). doi: https://doi.org/10.1039/c2cp40175d.
Nanoscale structure of surfactant-induced nanoparticle monolayers at the oil-water interface. D.C.E., C., Pontoni, D., Deutsch, M., Reichert, H. & Daillant, J. Soft Matter 8, 11478–11483 (2012). doi: https://doi.org/10.1039/C2SM26520F.
A versatile indirect detector design for hard X-ray microimaging. Douissard, P. A., Cecilia, A., Rochet, X., Chapel, X., Martin, T., van de Kamp, T., Helfen, L., Baumbach, T., Luquot, L., Xiao, X., Meinhardt, J. & Rack, A. Journal of Instrumentation 7, P09016 (2012). doi: https://doi.org/10.1088/1748-0221/7/09/P09016.
X-Ray Reflectivity at Polarized Liquid-Hg-Aqueous-Electrolyte Interface: Challenging Macroscopic Approaches for Ion-Specificity Issues. Duval, J. F. L., Bera, S., Michot, L. J., Daillant, J., Belloni, L., Konovalov, O. & Pontoni, D. Physical Review Letters 108, 206102 (2012). doi: https://doi.org/10.1103/PhysRevLett.108.206102.
High-resolution x-ray characterization of mosaic crystals for hard x-ray astronomy. Ferrari, C., Buffagni, E., Marchini, L. & Zappettini, A. Optical Engineering 51, 046502–1-046502–5 (2012). doi: https://doi.org/10.1117/1.OE.51.4.046502.
Residual stress fields after FOD impact on flat and aerofoil-shaped leading edges. Frankel, P. G., Withers, P. J., Preuss, M., Wang, H. T., Tong, J. & Rugg, D. Mechanics of Materials 55, 130–145 (2012). doi: https://doi.org/10.1016/j.mechmat.2012.08.007.
Real-time and in situ monitoring of mechanochemical milling reactions. Friščić, T., Halasz, I., Beldon, P. J., Belenguer, A. M., Adams, F., Kimber, S. A. J., Honkimäki, V. & Dinnebier, R. E. Nature Chemistry 5, 66 (2012). .
Study of diffusive transformations by high energy X-ray diffraction. Étude des transformations diffusives par diffraction des rayons X à haute énergie. Geandier, G., Aeby-Gautier, E., Settefrati, A., Dehmas, M. & Appolaire, B. Comptes Rendus Physique 13, 257–267 (2012). doi: https://doi.org/10.1016/j.crhy.2011.12.001.
In Situ Synchrotron Microtomography Reveals Multiple Reaction Pathways During Soda-Lime Glass Synthesis. Gouillart, E., Toplis, M. J., Grynberg, J., Chopinet, M. H., Sondergard, E., Salvo, L., Suery, M., Di Michiel, M. & Varoquaux, G. Journal of the American Ceramic Society 95, 1504–1507 (2012). doi: https://doi.org/10.1111/j.1551-2916.2012.05151.x.
Quantification and localization of the liquid zone of partially remelted M2 tool steel using X-ray microtomography and scanning electron microscopy. Gu, G. C., Pesci, R., Becker, E., Langlois, L., Bigot, R. & Scheel, M. Acta Materialia 60, 948–957 (2012). doi: https://doi.org/10.1016/j.actamat.2011.10.039.
Reconstruction in the three-dimensional parallel scanning geometry with application in synchrotron-based x-ray tomography. Hahn, B. & Louis, A. K. Inverse Problems 28, 045013–1-045013–18 (2012). doi: https://doi.org/10.1088/0266-5611/28/4/045013.
Experimental characterisation of (localised) deformation phenomena in granular geomaterials from sample down to inter-and intra-grain scales. Hall, S. A., Desrues, J., Viggiani, G., Bésuelle, P. & Andò, E. Procedia IUTAM 4, 54–65 (2012). doi: https://doi.org/10.1016/j.piutam.2012.05.007.
High-energy transmission Laue micro-beam X-ray diffraction: A probe for intra-granular lattice orientation and elastic strain in thicker samples. Hofmann, F., Song, X., Abbey, B., Jun, T. S. & Korsunsky, A. M. Journal of Synchrotron Radiation 19, 307–318 (2012). doi: https://doi.org/10.1107/S0909049512003044.
Analysis of particle rolling and intrinsic rotations in copper powder during sintering. Kieback, B., Noethe, M., Grupp, R., Banhart, J., Rasp, T. & Kraft, T. Journal of Materials Science 47, 7047–7055 (2012). doi: https://doi.org/10.1007/s10853-012-6558-0.
Surface and Bulk Approach to Time-resolved Characterization of Heterogeneous Catalysts. Kubacka, A., Iglesias-Juez, A., Martinez-Arias, A., Di Michiel, M., Newton, M. A. & Fernandez-Garcia, M. Chemcatchem 4, 725–737 (2012). doi: https://doi.org/10.1002/cctc.201200131.
Resolution effect on the study of ductile damage using synchrotron X-ray tomography. Landron, C., Maire, E., Adrien, J., Bouaziz, O., Di Michiel, M., Cloetens, P. & Suhonen, H. Nuclear Instruments & Methods in Physics Research Section B-beam Interactions with Materials and Atoms 284, 15–18 (2012). doi: https://doi.org/10.1016/j.nimb.2011.08.069.
A new approach to synchrotron energy-dispersive X-ray diffraction computed tomography. Lazzari, O., Egan, C. K., Jacques, S. D. M., Sochi, T., Di Michiel, M., Cernik, R. J. & Barnes, P. Journal of Synchrotron Radiation 19, 471–477 (2012). doi: https://doi.org/10.1107/S0909049512015543.
Ultra Fast Tomography: New Developments for 4D Studies in Material Science. Lhuissier, P., Scheel, M., Di Michiel, M., Boller, E., Adrien, J., Maire, E., Salvo, L., Blandin, J. J. & Suery, M. Proceedings of the 1st International Conference on 3d Materials Science , 203–208 (2012). .
Ultra fast tomography: New developments for 4D studies in material science. 2012 International Conference on 3D Materials Science -, Lhuissier, P., Scheel, M., Di Michiel, M., Boller, E., Adrien, J., Maire, E., Salvo, L., Blandin, J. J. & Suéry, M., in ed. De Graef, M., Poulsen, H. F., Lewis, A., Simmons, J. & Spanos, G., 203–208. (2012). doi: https://doi.org/10.1002/9781118686768.ch31.
Stress evaluation by neutron and synchrotron radiation. Lodini, A. & Benmarouane, A. Solid State Phenomena 188, 262–267 (2012). doi: https://doi.org/10.4028/www.scientific.net/SSP.188.262.
Real-time synchrotron X-ray diffraction study on the isothermal martensite transformation of maraging steel in high magnetic fields. Martin, D. S., Jimenez-Melero, E., Duffy, J. A., Honkimaki, V., van der Zwaag, S. & van Dijk, N. H. Journal of Applied Crystallography 45, 748–757 (2012). doi: https://doi.org/10.1107/S0021889812024892.
Three-dimensional investigation of thermal barrier coatings by synchrotron-radiation computed laminography. Maurel, V., Helfen, L., N'Guyen, F., Koster, A., Di Michiel, M., Baumbach, T. & Morgeneyer, T. F. Scripta Materialia 66, 471–474 (2012). doi: https://doi.org/10.1016/j.scriptamat.2011.12.021.
Comprehensive numerical analysis of a three-pass bead-in-slot weld and its critical validation using neutron and synchrotron diffraction residual stress measurements. Muránsky, O., Smith, M. C., Bendeich, P. J., Holden, T. M., Luzin, V., Martins, R. V. & Edwards, L. International Journal of Solids and Structures 49, 1045–1062 (2012). doi: https://doi.org/10.1016/j.ijsolstr.2011.07.006.
Direct observation of Nb3Sn lattice deformation by high-energy x-ray diffraction in internal-tin wires subject to mechanical loads at 4.2 K. Muzzi, L., Corato, V., della Corte, A., De Marzi, G., Spina, T., Daniels, J., Di Michiel, M., Buta, F., Mondonico, G., Seeber, B., Flukiger, R. & Senatore, C. Superconductor Science & Technology 25, 054006 (2012). doi: https://doi.org/10.1088/0953-2048/25/5/054006.
Observing Oxygen Storage and Release at Work during Cycling Redox Conditions: Synergies between Noble Metal and Oxide Promoter. Newton, M. A., Di Michiel, M., Kubacka, A., Iglesias-Juez, A. & Fernandez-Garcia, M. Angewandte Chemie-international Edition 51, 2363–2367 (2012). doi: https://doi.org/10.1002/anie.201105790.
Active phase evolution in single Ni/Al2O3 methanation catalyst bodies studied in real time using combined mu-XRD-CT and mu-absorption-CT. O'Brien, M. G., Jacques, S. D. M., Di Michiel, M., Barnes, P., Weckhuysen, B. M. & Beale, A. M. Chemical Science 3, 509–523 (2012). doi: https://doi.org/10.1039/C1SC00637A.
A scanning Kelvin probe for synchrotron investigations: The in situ detection of radiation-induced potential changes. Salgin, B., Vogel, D., Pontoni, D., Schröder, H., Schonberger, B., Stratmann, M., Reichert, H. & Rohwerder, M. Journal of Synchrotron Radiation 19, 48–53 (2012). doi: https://doi.org/10.1107/S0909049511047066.
3D In Situ Imaging of Aluminium Alloys During Solidification. Salvo, L., Lhuissier, P., Scheel, M., Terzi, S., Di Michiel, M., Boller, E., Taylor, J. A., Dahle, A. K. & Suery, M. Transactions of the Indian Institute of Metals 65, 623–626 (2012). doi: https://doi.org/10.1007/s12666-012-0218-6.
3D Characterization of Thermal Fatigue Damage in Monofilament Reinforced Copper for Heat Sink Applications in Fusion Reactor Systems. Schobel, M., Degischer, H. P., Brendel, A., Harrer, B. & Di Michiel, M. Praktische Metallographie-practical Metallography 49, 278–289 (2012). doi: https://doi.org/10.3139/147.110139.
Polarization degree and direction angle effects on a CdZnTe focal plane performance. da Silva R.M., C., Caroli, E., Stephen, J. B., Auricchio, N., Maia, J. M., Del Sordo, S., Basili, A., Schiavone, F., Gloster, C. P., A.M.F., T. & Honkimäki, V. IEEE Transactions on Nuclear Science 59, 1628–1635 (2012). doi: https://doi.org/10.1109/TNS.2012.2195504.
Experimental and numerical study of the tantalum single crystal spallation. Soulard, L., Bontaz-Carion, J. & Cuq-Lelandais, J. P. European Physical Journal B 85, 332–2-332–15 (2012). doi: https://doi.org/10.1140/epjb/e2012-30269-9.
Apport de la simulation numérique pour l'évaluation des contraintes par diffraction de neutrons et rayonnement synchrotron. Rayonnement synchrotron, rayons X et neutrons au service des matériaux, Sprauel, J. M., in ed. Lodini, A. & Baudin, T., 449–476. (2012). .
Friction stir welding of HSLA-65 steel: Part II. The influence of weld speed and tool material on the residual stress distribution and tool wear. Steuwer, A., Barnes, S. J., Altenkirch, J., Johnson, R. & Withers, P. J. Metallurgical and Materials Transactions A 43, 2356–2365 (2012). doi: https://doi.org/10.1007/s11661-011-0643-x.
Residual stresses, microstructure and tensile properties in Ti-6Al-4V friction stir welds. Steuwer, A., Hattingh, D. G., James, M. N., Singh, U. & Buslaps, T. Science and Technology of Welding and Joining 17, 525–533 (2012). doi: https://doi.org/10.1179/136217112X13439160184196.
In situ synchrotron tomographic investigation of the solidification of an AlMg4.7Si8 alloy. Tolnai, D., Townsend, P., Requena, G., Salvo, L., Lendvai, J. & Degischer, H. P. Acta Materialia 60, 2568–2577 (2012). doi: https://doi.org/10.1016/j.actamat.2012.01.024.
Residual stress analysis of stellite-coated forging tool steel using synchrotron radiation diffraction. Toumi, M. Y., Benmarouane, A., Bonnefoy, H., Buslaps, T., Lodini, A. & Honkimäki, V. Materials Science Forum 706-709, 1696–1701 (2012). doi: https://doi.org/10.4028/www.scientific.net/MSF.706-709.1696.
Systematic investigation of residual strains associated with WC-Co coatings thermal sprayed onto metal substrates. Venter, A. M., Pirling, T., Buslaps, T., Oladijo, O. P., Steuwer, A., Ntsoane, T. P., Cornish, L. A. & Sacks, N. Surface & Coatings Technology 206, 4011–4020 (2012). doi: https://doi.org/10.1016/j.surfcoat.2012.03.081.
Imaging in four dimensions. Withers, P. J. & Lee, P. Ingenia 51, 40–45 (2012). .
Evolution of crack-bridging and crack-tip driving force during the growth of a fatigue crack in a Ti/SiC composite. Withers, P. J., Lopez-Crespo, P., Kyrieleis, A. & Hung, Y. C. Proceedings of the Royal Society A 468, 2722–2743 (2012). doi: https://doi.org/10.1098/rspa.2012.0070.
Watching the WO process with time and space resolved X-ray diffraction.. Wragg, D. S., O'Brien, M. G., Bleken, F., Olsbye, U., Di Michiel, M. & Fjellvag, H. Acta Crystallographica A-foundation and Advances 68, S45–S45 (2012). doi: https://doi.org/10.1107/S010876731209914X.
Watching the Methanol-to-Olefin Process with Time- and Space-Resolved High-Energy Operando X-ray Diffraction. Wragg, D. S., O'Brien, M. G., Bleken, F. L., Di Michiel, M., Olsbye, U. & Fjellvåg, H. Angewandte Chemie International Edition 51, 7956–7959 (2012). doi: https://doi.org/10.1002/anie.201203462.
Comparison of methods to determine variations in unstrained unit cell parameter across welds. Altenkirch, J., Peel, M. J., Steuwer, A. & Withers, P. J. Journal of Strain Analysis for Engineering Design 46, 651–662 (2011). doi: https://doi.org/10.1177/0959651811414643.
Multiscale modeling and characterization of granular matter: From grain kinematics to continuum mechanics. Andrade, J. E., Avila, C. F., Hall, S. A., Lenoir, N. & Viggiani, G. Journal of the Mechanics and Physics of Solids 59, 237–250 (2011). doi: https://doi.org/10.1016/j.jmps.2010.10.009.
Determination of depolarization temperature of (Bi1/2Na1/2)TiO3-based lead-free piezoceramics. Anton, E. M., Jo, W., Damjanovic, D. & Rödel, J. Journal of Applied Physics 110, 094108–1-094108–14 (2011). doi: https://doi.org/10.1063/1.3660253.
Charge transport properties in CZT detectors grown by the vertical Bridgman technique. Nuclear Science Symposium Conference Record (NSS/MIC), 2010 IEEE -, Auricchio, N., Marchini, L., Caroli, E., Stephen, J. B., Zanichelli, M., Zappetini, A., Abbene, L., Del Sordo, S. & Honkimäki, V., in 3947–3952. (2011). doi: https://doi.org/10.1109/NSSMIC.2010.5874555.
Charge transport properties in CdZnTe detectors grown by the vertical Bridgman technique. Auricchio, N., Marchini, L., Caroli, E., Zappettini, A., Abbene, L. & Honkimäki, V. Journal of Applied Physics 110, 124502–1-124502–7 (2011). doi: https://doi.org/10.1063/1.3667201.
Self-standing bent silicon crystals for very high efficiency Laue lens. Bellucci, V., Camattari, R., Guidi, V., Neri, I. & Barrière, N. Experimental Astronomy 31, 45–58 (2011). doi: https://doi.org/10.1007/s10686-011-9226-5.
Simulation and evaluation of residual stress in bone at the interface with implant. Benmarouane, A., Shi, Y., Mireux, B., Buslaps, T. & Lodini, A. Materials Science Forum 681, 315–320 (2011). doi: https://doi.org/10.4028/www.scientific.net/MSF.681.315.
Characterization of creep and creep damage by in-situ microtomography. Borbely, A., Dzieciol, K., Sket, F., Isaac, A., di Michiel, M., Buslaps, T. & Kaysser-Pyzalla, A. R. Jom 63, 78–84 (2011). doi: https://doi.org/10.1007/s11837-011-0117-z.
Preparation of bent crystals as high-efficiency optical elements for hard x-ray astronomy. Buffagni, E., Ferrari, C., Rossi, F., Marchini, L. & Zappettini, A., in 81471H-81471H-9. (2011). doi: https://doi.org/10.1117/12.893701.
Hard X ray polarimetry with wide band Laue lens telescopes. Caroli, E., da Silva R.M., C., Del Sordo, S. & Stephen, J. B. PoS - Proceedings of Science Extremesky 2011, 067–1-067–7 (2011). .
Recent studies at Onera on superalloys for single crystal turbine blades. Caron, P. & Lavigne, O. AerospaceLab - The Onera Journal 3, 1–14 (2011). .
Residual stress distribution in ceramic/metal systems by non-destructive techniques. Carradó, A. 11th International Conference on the Mechanical Behavior of Materials - 10, 3074–3079 (2011). doi: https://doi.org/10.1016/j.proeng.2011.04.509.
A GPU-based architecture for real-time data assessment at synchrotron experiments. Chilingaryan, S., Mirone, A., Hammersley, A., Ferrero, C., Helfen, L., Kopmann, A., dos Santos Rolo T. & Vagovič, P. IEEE Transactions on Nuclear Science 58, 1447–1455 (2011). doi: https://doi.org/10.1109/TNS.2011.2141686.
Polyamorphic amorphous silicon at high pressure: Raman and spatially resolved X-ray scattering and molecular dynamics studies. Daisenberger, D., Deschamps, T., Champagnon, B., Mezouar, M., Quesada Cabrera, R., Wilson, M. & McMillan, P. F. Journal of Physical Chemistry B 115, 14246–14255 (2011). doi: https://doi.org/10.1021/jp205090s.
Void growth in copper during high-temperature power-law creep. Dzieciol, K., Borbely, A., Sket, F., Isaac, A., Di Michiel, M., Cloetens, P., Buslaps, T. & Pyzalla, A. R. Acta Materialia 59, 671–677 (2011). doi: https://doi.org/10.1016/j.actamat.2010.10.003.
High-resolution x-ray characterization of mosaic crystals for hard x-and gamma-ray astronomy. Ferrari, C., Buffagni, E., Marchini, L. & Zappettini, A., in 81471F-81471F-7. (2011). doi: https://doi.org/10.1117/12.893684.
Cooperative material transport during the early stage of sintering. Grupp, R., Nöthe, M., Kieback, B. & Banhart, J. Nature Communications 2, 298–1-298–6 (2011). doi: https://doi.org/10.1038/ncomms1300.
Microstructure evolution and material flow of steel in semi-solid forming process. Gu, G. C., Becker, E., Langlois, L., Pesci, R. & Bigot, R. Steel Research International Special issue -, 768–773 (2011). .
Bent crystals by surface grooving method for high-efficiency concentration of hard x-ray photons by a Laue lens. Optics for EUV, X-Ray, and Gamma-Ray Astronomy V -, Guidi, V., Barrière, N., Bellucci, V., Camattari, R. & Neri, I., in 81471E-1–81471E-7. (2011). doi: https://doi.org/10.1117/12.895334.
On the implementation of computed laminography using synchrotron radiation. Helfen, L., Myagotin, A., Mikulik, P., Pernot, P., Voropaev, A., Elyyan, M., Di Michiel, M., Baruchel, J. & Baumbach, T. Review of Scientific Instruments 82, 063702 (2011). doi: https://doi.org/10.1063/1.3596566.
Cooperation of length scales and orientations in the deformation of bovine bone. Hoo, R. P., Fratzl, P., Daniels, J. E., J.W.C., D., Honkimäki, V. & Hoffman, M. Acta Biomaterialia 7, 2943–2951 (2011). doi: https://doi.org/10.1016/j.actbio.2011.02.017.
Nanoparticulate Pd Supported Catalysts: Size-Dependent Formation of Pd(I)/Pd(0) and Their Role in CO Elimination. Iglesias-Juez, A., Kubacka, A., Fernandez-Garcia, M., Di Michiel, M. & Newton, M. A. Journal of the American Chemical Society 133, 4484–4489 (2011). doi: https://doi.org/10.1021/ja110320y.
Containerless solidification and characterization of industrial alloys (NEQUISOL). Ilbagi, A., Henein, H., Chen, J., Herlach, D. M., Lengsdorf, R., Gandin, C. A., Tourret, D. & Garcia-Escorial, A. Journal of Physics : Conference Series 327, 012007–1-012007–19 (2011). doi: https://doi.org/10.1088/1742-6596/327/1/012007.
In-situ microtomographic characterization of single-cavity growth during high-temperature creep of leaded brass. Isaac, A., Dzieciol, K., Sket, F. & Borbély, A. Metallurgical and Materials Transactions A 42, 3022–3030 (2011). doi: https://doi.org/10.1007/s11661-011-0781-1.
In situ measurement of internal stresses and strain rates by high energy X-Ray diffraction during high temperature mechanical testing. Jacques, A., Dirand, L., Chateau, J. P., Schenk, T., Ferry, O. & Bastie, P. Euro Superalloys 2010 278, 48–+ (2011). doi: https://doi.org/10.4028/www.scientific.net/AMR.278.48.
Dynamic X-Ray Diffraction Computed Tomography Reveals Real-Time Insight into Catalyst Active Phase Evolution. Jacques, S. D. M., Di Michiel, M., Beale, A. M., Sochi, T., O'Brien, M. G., Espinosa-Alonso, L., Weckhuysen, B. M. & Barnes, P. Angewandte Chemie-international Edition 50, 10148–10152 (2011). doi: https://doi.org/10.1002/anie.201104604.
Residual stress influences on structural reliability. James, M. N. Engineering Failure Analysis 18, 1909–1920 (2011). doi: https://doi.org/10.1016/j.engfailanal.2011.06.005.
Microstructure and properties of hot isostatically pressed powder and extruded Ti25V15Cr2Al0·2C. Jiang, H., Zhang, K., Garcia-Pastor, F. A., Loretto, M. H., Hu, D., Withers, P. J., Preuss, M. & Wu, X. Materials Science and Technology 27, 1241–1248 (2011). doi: https://doi.org/10.1179/026708310X12852304599825.
Evolving morphotropic phase boundary in lead-free (Bi1/2Na1/2)TiO3-BaTiO3 piezoceramics. Jo, W., Daniels, J. E., Jones, J. L., Tan, X., Thomas, P. A., Damjanovic, D. & Rödel, J. Journal of Applied Physics 109, 014110–1-01411–7 (2011). doi: https://doi.org/10.1063/1.3530737.
Bubble formation within filaments of melt-processed Bi2212 wires and its strongly negative effect on the critical current density. Kametani, F., Shen, T., Jiang, J., Scheuerlein, C., Malagoli, A., Di Michiel, M., Huang, Y., Miao, H., Parrell, J. A., Hellstrom, E. E. & Larbalestier, D. C. Superconductor Science & Technology 24, 075009 (2011). doi: https://doi.org/10.1088/0953-2048/24/7/075009.
High-speed measurement of axial grain transport in a rotating drum. Khan, Z. S., Van Bussel, F., Schaber, M., Seemann, R., Scheel, M. & Di Michiel, M. New Journal of Physics 13, 105005 (2011). doi: https://doi.org/10.1088/1367-2630/13/10/105005.
Charge collection and depth sensing investigation on CZT driftt strip detectors. in [Formatter not found: BookTitle] Application of dynamic time-over-threshold method to pixellated CdTe detector, Kuvvetli, I., Budtz-Jørgensen, C., Caroli, E., Auricchio, N., Kalemci, E. & Stephen, J. B. (2011). , 3880–3884. .
Validation of void growth models using X-ray microtomography characterization of damage in dual phase steels. Landron, C., Maire, E., Bouaziz, O., Adrien, J., Lecarme, L. & Bareggi, A. Acta Materialia 59, 7564–7573 (2011). doi: https://doi.org/10.1016/j.actamat.2011.08.046.
Feature reconstruction in inverse problems. Louis, A. K. Inverse Problems 27, 065010–1-065010–21 (2011). doi: https://doi.org/10.1088/0266-5611/27/6/065010.
Modelling and statistical treatment of residual stress distributions in an edge welded stainless steel beam. Nadri, B., Bouchard, P. J., Smith, M., Truman, C. E. & Smith, D. J. Strain 47, 505–517 (2011). doi: https://doi.org/10.1111/j.1475-1305.2009.00718.x.
Closing the operando gap: The application of high energy photons for studying catalytic solids at work. O'Brien, M. G., Beale, A. M., Jacques, S. D. M., Di Michiel, M. & Weckhuysen, B. M. Applied Catalysis A-general 391, 468–476 (2011). doi: https://doi.org/10.1016/j.apcata.2010.06.027.
Unifying interfacial self-assembly and surface freezing. Ocko, B. M., Hlaing, H., Jepsen, P., Kewalramani, S., Tkachenko, A., Pontoni, D., Reichert, H. & Deutsch, M. Physical Review Letters 106, 137801–1-137801–4 (2011). doi: https://doi.org/10.1103/PhysRevLett.106.137801.
POLAR: A space-borne X-ray polarimeter for transient sources. Orsi, S. Astrophysics and Space Sciences Transactions (ASTRA) 7, 43–47 (2011). doi: https://doi.org/10.5194/astra-7-43-2011.
Response of the Compton polarimeter POLAR to polarized hard X-rays. Orsi, S., Haas, D., Hajdas, W., Honkimaki, V., Lamanna, G., Lechanoine-Leluc, C., Marcinkowski, R., Pohl, M., Produit, N., Rapin, D., Suarez-Garcia, E., Rybka, D. & Vialle, J. P. Nuclear Instruments & Methods in Physics Research Section A-accelerators Spectrometers Detectors and Associated Equipment 648, 139–154 (2011). doi: https://doi.org/10.1016/j.nima.2011.04.012.
Coherent synchrotron-based micro-imaging employed for studies of micro-gap formation in dental implants. 10th International Conference on X-Ray Microscopy -, Rack, T., Zabler, S., Rack, A., Stiller, M., Riesemeier, H., Cecilia, A. & Nelson, K., in ed. McNulty, I., Eyberger, C. & Lai, B., 445–448. (2011). doi: https://doi.org/10.1063/1.3625398.
Coarse Nb3Sn Grain Formation and Phase Evolution During the Reaction of a High Sn Content Internal Tin Strand. Scheuerlein, C., Di Michiel, M., Arnau, G., Flukiger, R., Buta, F., Pong, I., Oberli, L. & Bottura, L. Ieee Transactions on Applied Superconductivity 21, 2554–2558 (2011). doi: https://doi.org/10.1109/TASC.2010.2082476.
Void and phase evolution during the processing of Bi-2212 superconducting wires monitored by combined fast synchrotron micro-tomography and x-ray diffraction. Scheuerlein, C., Di Michiel, M., Scheel, M., Jiang, J., Kametani, F., Malagoli, A., Hellstrom, E. E. & Larbalestier, D. C. Superconductor Science & Technology 24, 115004 (2011). doi: https://doi.org/10.1088/0953-2048/24/11/115004.
Internal stresses and voids in SiC particle reinforced aluminum composites for heat sink applications. Schobel, M., Altendorfer, W., Degischer, H. P., Vaucher, S., Buslaps, T., Di Michiel, M. & Hofmann, M. Composites Science and Technology 71, 724–733 (2011). doi: https://doi.org/10.1016/j.compscitech.2011.01.020.
Thermal cycling stresses in W-monofilament reinforced copper. Schöbel, M., Jonke, J., Degischer, H. P., Herrmann, A., Brendel, A., Wimpory, R. & Buslaps, T. Advanced Engineering Materials 13, 742–746 (2011). doi: https://doi.org/10.1002/adem.201000309.
Thermal fatigue damage in monofilament reinforced copper for heat sink applications in divertor elements. Schobel, M., Jonke, J., Degischer, H. P., Paffenholz, V., Brendel, A., Wimpory, R. C. & Di Michiel, M. Journal of Nuclear Materials 409, 225–234 (2011). doi: https://doi.org/10.1016/j.jnucmat.2010.12.242.
In situ observations of solidification in Ti-Al-Ta alloys by synchrotron radiation. Shuleshova, O., Holland-Moritz, D., Voss, A. & Löser, W. Intermetallics 19, 688–692 (2011). doi: https://doi.org/10.1016/j.intermet.2011.01.005.
Compression and thermal expansion of nanocrystalline TiN. Stelmakh, S., Grzanka, E., Gierlotka, S., Janik, J. F., Drygas, M., Lathe, C. & Palosz, B. Zeitschrift für Kristallographie Proceedings 1, 241–246 (2011). doi: https://doi.org/10.1524/zkpr.2011.0036.
A combined approach to microstructure mapping of an Al-Li AA2199 friction stir weld. Steuwer, A., Dumont, M., Altenkirch, J., Birosca, S., Deschamps, A., Prangnell, P. B. & Withers, P. J. Acta Materialia 59, 3002–3011 (2011). doi: https://doi.org/10.1016/j.actamat.2011.01.040.
Qualification tests of the space-based POLAR X-ray polarimeter. 32nd International Cosmic Ray Conference -, Sun, J., Orsi, S., Azzarello, P., Britvitch, I., Cadoux, F., Chai, J., Haas, D., Hajdas, W., Honkimäki, V., Lamanna, G., Li, L., Lechanoine-Leluc, C., Marcinkowski, R., Pohl, M., Produit, N., Rapin, D., Rybka, D., Suarez-Garcia, E., Vialle, J. P., Wu, B., Xiao, H., Xing, W., Zhang, A., Zhang, L., Zhang, S. & Zhang, Y., in 1–4. (2011). .
Modification of deeply buried hydrophobic interfaces by ionic surfactants. Tamam, L., Pontoni, D., Sapir, Z., Yefet, S., Sloutskin, E., Ocko, B. M., Reichert, H. & Deutsch, M. Proceedings of the National Academy of Sciences of the USA 108, 5522–5525 (2011). doi: https://doi.org/10.1073/pnas.1014100108.
Nb3Sn nucleation and growth in multifilament superconducting strands monitored by high resolution synchrotron diffraction during in situ reaction. Thilly, L., Di Michiel, M., Scheuerlein, C. & Bordini, B. Applied Physics Letters 99, 122508 (2011). doi: https://doi.org/10.1063/1.3641904.
Rapid diagnosis of electromigration induced failure time of Pb-free flip chip solder joints by high resolution synchrotron radiation laminography. Tian, T., Xu, F., Han, J. K., Choi, D. C., Cheng, Y., Helfen, L., Di Michiel, M., Baumbach, T. & Tu, K. N. Applied Physics Letters 99, 082114 (2011). doi: https://doi.org/10.1063/1.3628342.
In situ observation of ductile fracture using X-ray tomography technique. Toda, H., Maire, E., Yamauchi, S., Tsuruta, H., Hiramatsu, T. & Kobayashi, M. Acta Materialia 59, 1995–2008 (2011). doi: https://doi.org/10.1016/j.actamat.2010.11.065.
A large-volume gas cell for high-energy X-ray reflectivity investigations of interfaces under pressure. Venturini, F., Schöder, S., Kuhs, W. F., Honkimäki, V., Mélési, L., Reichert, H., Schober, H. & Thomas, F. Journal of Synchrotron Radiation 18, 251–256 (2011). doi: https://doi.org/10.1107/S0909049510052106.
Scattering techniques. An Introduction to Synchrotron Radiation: Techniques and Applications, Willmott, P., in ed. Willmott, P., 133–221. (2011). doi: https://doi.org/10.1002/9781119970958.ch5.
3D crack-tip microscopy: Illuminating micro-scale effects on crack-tip behavior. Withers, P. J. Advanced Engineering Materials 13, 1096–1100 (2011). doi: https://doi.org/10.1002/adem.201100092.
Overload effects on local fatigue crack-tip strain fields in plane stress samples. Giornata IGF Forni di Sopra (UD) 2011 -, Withers, P. J., Dai, H., Lopez-Crespo, P., Steuwer, A., Yusof, F., Kelleher, J. F. & Buslaps, T., in 185–192. (2011). .
Process–microstructure–property correlations in Al–Li AA2199 friction stir welds. Altenkirch, J., Steuwer, A. & Withers, P. J. Science and Technology of Welding and Joining 15, 522–527 (2010). doi: https://doi.org/10.1179/136217110X12720264008510.
X-ray and neutron imaging - Complementary techniques for materials science and engineering. Banhart, J., Borbély, A., Dzieciol, K., García-Moreno, F., Manke, I., Kardjilov, N., Kaysser-Pyzalla, A. R., Strobl, M. & Treimer, W. International Journal of Materials Research 101, 1069–1079 (2010). doi: https://doi.org/10.3139/146.110382.
High diffraction efficiency at hard X-ray energy in a silicon crystal bent by indentation. Barrière, N., Guidi, V., Bellucci, V., Camattari, R., Buslaps, T., Rousselle, J., Roudil, G., Arnaud, F. X., Bastie, P. & Natalucci, L. Journal of Applied Crystallography 43, 1519–1521 (2010). doi: https://doi.org/10.1107/S0021889810038343.
Development of efficient Laue lenses: Experimental results and projects. Barrière, N., Tomsick, J., Boggs, S., Rousselle, J. & von Ballmoos P., in 773226–1-773226–11. (2010). doi: https://doi.org/10.1117/12.857813.
Evaluation of the overload effect on fatigue crack growth with the help of synchrotron XRD strain mapping. Belnoue, J. P., Jun, T. S., Hofmann, F., Abbey, B. & Korsunsky, A. M. Engineering Fracture Mechanics 77, 3216–3226 (2010). doi: https://doi.org/10.1016/j.engfracmech.2010.08.018.
In situ synchrotron diffraction of the electrochemical reduction pathway of TiO2. Bhagat, R., Dye, D., Raghunathan, S. L., Talling, R. J., Inman, D., Jackson, B. K., Rao, K. K. & Dashwood, R. J. Acta Materialia 58, 5057–5062 (2010). doi: https://doi.org/10.1016/j.actamat.2010.05.041.
A new methodology for the near-surface strain measurement on Pd-Ag-Sn alloy. Carradó, A. Applied Surface Science 256, 6340–6344 (2010). doi: https://doi.org/10.1016/j.apsusc.2010.04.013.
Structural, microstructural, and residual stress investigations of plasma-sprayed hydroxyapatite on Ti-6Al-4 V. Carradó, A. ACS Applied Materials & Interfaces 2, 561-565 (2010). doi: https://doi.org/10.1021/am900763j.
Microstructural and mechanical investigations on porcelain-fused-to-metal in multilayer system. Carradó, A. & Palkowski, H. Advanced Engineering Materials 12 -, B122-B127 (2010). doi: https://doi.org/10.1002/adem.200980014.
Electric-field-induced phase-change behavior in (Bi0.5Na0.5)TiO3-BaTiO3-(K0.5Na0.5)NbO3: A combinatorial investigation. Daniels, J. E., Jo, W., Rödel, J., Honkimäki, V. & Jones, J. L. Acta Materialia 58, 2103–2111 (2010). doi: https://doi.org/10.1016/j.actamat.2009.11.052.
Simultaneous small- and wide-angle scattering at high X-ray energies. Daniels, J. E., Pontoni, D., Hoo, R. P. & Honkimäki, V. Journal of Synchrotron Radiation 17, 473–478 (2010). doi: https://doi.org/10.1107/S0909049510016456.
Thermal stability of nanocomposite metals: In situ observation of anomalous residual stress relaxation during annealing under synchrotron radiation. Dubois, J. B., Thilly, L., Renault, P. O., Lecouturier, F. & Di Michiel, M. Acta Materialia 58, 6504–6512 (2010). doi: https://doi.org/10.1016/j.actamat.2010.08.013.
Discrete and continuum analysis of localised deformation in sand using X-ray µCT and volumetric digital image correlation. Hall, S. A., Bornert, M., Desrues, J., Pannier, Y., Lenoir, N., Viggiani, G. & Bésuelle, P. Geotechnique 60, 315–322 (2010). doi: https://doi.org/10.1680/geot.2010.60.5.315.
Characterization of the evolving grain-scale structure in a sand deforming under triaxial compression. in [Formatter not found: BookTitle] Advances in Computed Tomography for Geomaterials: GeoX 2010, Hall, S. A., Lenoir, N., Viggiani, G., Bésuelle, P. & Desrues, J. (2010). , 34–42. doi: https://doi.org/10.1002/9781118557723.ch4.
High energy transmission micro-beam Laue synchrotron X-ray diffraction. Hofmann, F., Song, X., Jun, T. S., Abbey, B., Peel, M., Daniels, J., Honkimäki, V. & Korsunsky, A. M. Materials Letters 64, 1302–1305 (2010). doi: https://doi.org/10.1016/j.matlet.2010.03.014.
Characterization of the FFC Cambridge process for NiTi production using in situ X-ray synchrotron diffraction. Jackson, B. K., Dye, D., Inman, D., Bhagat, R., Talling, R. J., Raghunathan, S. L., Jackson, M. & Dashwood, R. J. Journal of the Electrochemical Society 157, E57-E63 (2010). doi: https://doi.org/10.1149/1.3299369.
Shot-peening of steam turbine blades: Residual stresses and their modification by fatigue cycling. James, M. N., Newby, M., Hattingh, D. G. & Steuwer, A. Procedia Engineering 2, 441–451 (2010). doi: https://doi.org/10.1016/j.proeng.2010.03.048.
The use of diffraction to study fatigue crack tip mechanics. Kelleher, J. F., Lopez-Crespo, P., Yusof, F. & Withers, P. J. Materials Science Forum 652, 216–221 (2010). doi: https://doi.org/10.4028/www.scientific.net/MSF.652.216.
Investigation of sintering processes by tomography. Kieback, B., Nöthe, M., Banhart, J. & Grupp, R. THERMEC'2009 - 6th International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS - 638-642, 638–642 (2010). doi: https://doi.org/10.4028/www.scientific.net/MSF.638-642.2511.
Multitechnique analysis of supported Pd particles upon dynamic, cycling CO/NO conditions: Size-dependence of the structure-activity relationship. Kubacka, A., Martinez-Arias, A., Fernandez-Garcia, M., Di Michiel, M. & Newton, M. A. Journal of Catalysis 270, 275–284 (2010). doi: https://doi.org/10.1016/j.jcat.2010.01.008.
Full 3D spatially resolved mapping of residual strain in a 316L austenitic stainless steel weld specimen. Martins, R. V., Ohms, C. & Decroos, K. Materials Science and Engineering A 527, 4779–4787 (2010). doi: https://doi.org/10.1016/j.msea.2010.03.110.
Full depth-resolved strain mapping of a three-pass slot weld specimen in austenitic stainless steel using the spiral slit technique. Martins, R. V., Ohms, C. & Decroos, K. Materials Science Forum 652, 74–79 (2010). doi: https://doi.org/10.4028/www.scientific.net/MSF.652.74.
On the Origin of the Hydrophobic Water Gap: An X-ray Reflectivity and MD Simulation Study. Mezger, M., Sedlmeier, F., Horinek, D., Reichert, H., Pontoni, D. & Dosch, H. Journal of the American Chemical Society 132, 6735–6741 (2010). doi: https://doi.org/10.1021/ja910624j.
Residual stress evaluation at bone implant interfaces using high energy X-ray diffraction. Mireux, B., Buslaps, T., Honkimäki, V., Lodini, A. & Sprauel, J. M. Materials Science Forum 652, 180–184 (2010). doi: https://doi.org/10.4028/www.scientific.net/MSF.652.180.
In situ hard X-ray/infrared studies of the dynamic behviour of heterogeneous catalysts. Newton, M. A., Di Michiel, M., Fernandez-Garcia, M., Chupas, P. J. & Chapman, K. W. Abstracts of Papers of the American Chemical Society 240, (2010). .
Combining Time-Resolved Hard X-ray Diffraction and Diffuse Reflectance Infrared Spectroscopy To Illuminate CO Dissociation and Transient Carbon Storage by Supported Pd Nanoparticles during CO/NO Cycling. Newton, M. A., Di Michiel, M., Kubacka, A. & Fernandez-Garcia, M. Journal of the American Chemical Society 132, 4540–+ (2010). doi: https://doi.org/10.1021/ja9107512.
Cu-Ti Formation in Nb-Ti/Cu Superconducting Strand Monitored by in situ Techniques. Pong, I., Scheuerlein, C., Senatore, C., Thilly, L., Di Michiel, M., Gerardin, A., Hopkins, S. C., Oberli, L. R., Geandier, G., Glowacki, B. A. & Bottura, L. Diffusion in Solids and Liquids V, Pts 1 and 2 297-301, 695–+ (2010). doi: https://doi.org/10.4028/www.scientific.net/DDF.297-301.695.
On the possibilities of hard X-ray imaging with high spatio-temporal resolution using polychromatic synchrotron radiation. Rack, A., García-Moreno, F., Schmitt, C., Betz, O., Cecilia, A., Ershov, A., Rack, T., Banhart, J. & Zabler, S. Journal of X-Ray Science and Technology 18, 429–441 (2010). doi: https://doi.org/10.3233/XST-2010-0273.
Residual strain profiles in alumina-zirconia ceramic composites. Ruiz-Hervias, J., Steuwer, A., Gurauskis, J., Buslaps, T. & Baudin, C. Materials Science Forum 652, 57–62 (2010). doi: https://doi.org/10.4028/www.scientific.net/MSF.652.57.
Phase transformations during the reaction heat treatment of Nb3Sn superconductors. Scheuerlein, C., Di Michiel, M., Thilly, L., Buta, F., Peng, X., Gregory, E., Parrell, J. A., Pong, I., Bordini, B. & Cantoni, M. 9th European Conference on Applied Superconductivity (eucas 09) 234, 022032 (2010). doi: https://doi.org/10.1088/1742-6596/234/2/022032.
Temperature induced degradation of Nb-Ti/Cu composite superconductors. Scheuerlein, C., Pong, I., Senatore, C., Di Michiel, M., Thilly, L., Gerardin, A., Rehmer, B., Oberli, L., Willering, G. & Bottura, L. 9th European Conference on Applied Superconductivity (eucas 09) 234, 022031 (2010). doi: https://doi.org/10.1088/1742-6596/234/2/022031.
In situ observations of solidification processes in γ-TiAl alloys by synchrotron radiation. Shuleshova, O., Holland-Moritz, D., Löser, W., Voss, A., Hartmann, H., Hecht, U., Witusiewicz, V. T., Herlach, D. M. & Büchner, B. Acta Materialia 58, 2408–2418 (2010). doi: https://doi.org/10.1016/j.actamat.2009.12.027.
Polarization degree and vector angle effects on a CdZnTe focal plane performance. Nuclear Science Symposium Conference Record (NSS/MIC), 2010 IEEE -, da Silva R.M., C., Caroli, E., Stephen, J. B., Auricchio, N., Maia, J. M., Del Sordo, S., Basili, A., Schiavone, F., Campos, J. B., Gloster, C. P., A.M.F., T. & Honkimäki, V., in 3830–3835. (2010). doi: https://doi.org/10.1109/NSSMIC.2010.5874529.
Tomographic method for evaluation of apparent activation energy of steady-state creep. Sket, F., Dzieciol, K., Isaac, A., Borbély, A. & Pyzalla, A. R. Materials Science and Engineering A 527, 2112–2120 (2010). doi: https://doi.org/10.1016/j.msea.2009.11.058.
Strain gradient polycrystal plasticity analysis: Fe modeling and synchrotron X-ray diffraction. Song, X., Zhang, S. Y. & Korsunsky, A. M. International Journal of Modern Physics B 24, 10–17 (2010). doi: https://doi.org/10.1142/S0217979210063922.
Enhanced macro and micro stress evaluation diffraction techniques applied to biomedical materials. Sprauel, J. M. Materials Science Forum 638-642, 706–711 (2010). doi: https://doi.org/10.4028/www.scientific.net/MSF.638-642.706.
The evolution of crack-tip stresses during a fatigue overload event. Steuwer, A., Rahman, M., Shterenlikht, A., Fitzpatrick, M. E., Edwards, L. & Withers, P. J. Acta Materialia 58, 4039–4052 (2010). doi: https://doi.org/10.1016/j.actamat.2010.03.013.
Study of residual stresses generated inside laser cladded plates using FEM and diffraction of synchrotron radiation. Suárez, A., Amado, J. M., Tobar, M. J., Yáñez, A., Fraga, E. & Peel, M. J. Surface & Coatings Technology 204, 1983–1988 (2010). doi: https://doi.org/10.1016/j.surfcoat.2009.11.037.
Atomic-Scale Structure of a Liquid Metal-Insulator Interface. Tamam, L., Pontoni, D., Hofmann, T., Ocko, B. M., Reichert, H. & Deutsch, M. Journal of Physical Chemistry Letters 1, 1041–1045 (2010). doi: https://doi.org/10.1021/jz1000209.
Sand deformation at the grain scale quantified through X-ray imaging. 3rd International Workshop on X-Ray CT for Geomaterials, GeoX 2010 -, Viggiani, G., Bésuelle, P., Hall, S. A. & Desrues, J., in ed. Alshibli, K. A., Reed, A. H., Butler, L., Fredrich, J., Nunn, J., Thompson, K. & Willson, C., 1–16. (2010). doi: https://doi.org/10.1002/9781118557723.ch1.
High temperature stress-induced "double loop-like" phase transitions in Bi-based perovskites. Webber, K. G., Zhang, Y., Jo, W., Daniels, J. E. & Rödel, J. Journal of Applied Physics 108, 014101–1-014101–6 (2010). doi: https://doi.org/10.1063/1.3428373.
Imaging Fast Processes in Liquid Metal Foams and Semi-Solid Alloys Using Synchrotron Radioscopy with Spatio-Temporal Micro-Resolution. Zabler, S., Rack, A., Garcia-Moreno, F., Ershov, A., Baumbach, T. & Banhart, J. In-situ Studies with Photons, Neutrons and Electrons Scattering , 149–+ (2010). doi: https://doi.org/10.1007/978-3-642-14794-4_10.
Soft recovery of a ferrous alloy: Structural modification and properties. d'Almeida , T., Chapman, D. J., Proud, W. G., Gould, P. J., Church, P. D., Reynolds, M., Wheeler, R., MacGillivray, H. J., Di Michiel, M. & Merino, J. M. Dymat 2009: 9th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, Vol 2 , 971–+ (2009). doi: https://doi.org/10.1051/dymat/2009136.
Time/Space-Resolved Studies of the Nafion Membrane Hydration Profile in a Running Fuel Cell. Albertini, V. R., Paci, B., Nobili, F., Marassi, R. & Di Michiel, M. Advanced Materials 21, 578–+ (2009). doi: https://doi.org/10.1002/adma.200801652.
The extent of relaxation of weld residual stresses on cutting out cross-weld test-pieces. Altenkirch, J., Steuwer, A., Peel, M. J. & Withers, P. J. Powder Diffraction 24, S31–S36 (2009). doi: https://doi.org/10.1154/1.3152580.
Residual stress engineering in friction stir welds by roller tensioning. Altenkirch, J., Steuwer, A., Withers, P. J., Williams, S. W., Poad, M. & Wen, S. W. Science and Technology of Welding and Joining 14, 185–192 (2009). doi: https://doi.org/10.1179/136217108X388624.
Tartrate chirality determines thaumatin crystal habit. Asherie, N., Jakoncic, J., Ginsberg, C., Greenbaum, A., Stojanoff, V., Hrnjez, B. J., Blass, S. & Berger, J. Crystal Growth & Design 9, 4189–4198 (2009). doi: https://doi.org/10.1021/cg900465h.
Influence of linear friction welding parameters on the residual stress development in Ti-6246. 8th International Conference on Welding Research -, Attallah, M. M., Preuss, M., Withers, P. J. & Bray, S., in ed. David, S. A., DebRoy, T., DuPont, J. N., Koseki, T. & Smartt, H. B., 751–757. (2009). .
Laue optics for nuclear astrophysics: New detector requirements for focused gamma-ray beams. Barrière, N., von Ballmoos P., Abrosimov, N. V., Bastie, P., Camus, T., Courtois, P., Jentschel, M., Knödlseder, J., Natalucci, L., Roudil, G., Rousselle, J., Wunderer, C. B. & Kurlov, V. N. Fifth International Conference on New Developments in Photodetection - 610, 283–286 (2009). doi: https://doi.org/10.1016/j.nima.2009.05.133.
Experimental and theoretical study of the diffraction properties of various crystals for the realization of a soft gamma-ray Laue lens. Barriere, N., Rousselle, J., von Ballmoos, P., Abrosimov, N. V., Courtois, P., Bastie, P., Camus, T., Jentschel, M., Kurlov, V. N., Natalucci, L., Roudil, G., Brejnholt, N. F. & Serre, D. Journal of Applied Crystallography 42, 834–845 (2009). doi: https://doi.org/10.1107/S0021889809023218.
Soft gamma-ray optics: New Laue lens design and performance estimates. Barrière, N. M., Natalucci, L., Abrosimov, N., von Ballmoos P., Bastie, P., Courtois, P., Jentschel, M., Knödlseder, J., Rousselle, J. & Ubertini, P., in 74370K-1–74370K-11. (2009). doi: https://doi.org/10.1117/12.826138.
Moderne 2-D und 3-D abbildende Röntgenverfahren mit Synchrotronstrahlung. Baumbach, T., dos Santos Rolo T., Ershov, A., Helfen, L., Lübbert, D., Modregger, P., Pelliccia, D., Vagovič, P. & Xu, F. MP Materials Testing 51, 642–651 (2009). doi: https://doi.org/10.3139/120.110081.
X-Ray Tomography on MX Samples. Brockhauser, S., McCarthy, A. A., Di Michiel, M., McGeehan, J. E. & Ravelli, R. B. G. Acta Crystallographica A-foundation and Advances 65, S166–S166 (2009). doi: https://doi.org/10.1107/S0108767309096585.
Expérience de lévitation électromagnétique sous rayonnement synchrotron. 19ème congrès Français de la Mécanique -, Courtessole, C., Dumont, M., Schetelat, P., Pontoni, D., Di Michiel, M. & Etay, J., in 1–6. (2009). .
Electric-field-induced phase transformation at a lead-free morphotropic phase boundary : Case study in a 93%(Bi0.5Na0.5)TiO3 - 7% BaTiO3 piezoelectric ceramic. Daniels, J. E., Jo, W., Rödel, J. & Jones, J. L. Applied Physics Letters 95, 032904–1-032904–3 (2009). doi: https://doi.org/10.1063/1.3182679.
Phase transformation of constrained BaTiO3 particles in a Sn matrix. Daniels, J. E., Manuel, M. V., Brink, C. W. & Jones, J. L. Scripta Materialia 61, 391–394 (2009). doi: https://doi.org/10.1016/j.scriptamat.2009.04.028.
Comparison of residual stresses in Ti-6Al-4V and Ti-6Al-2Sn-4Zr-2Mo linear friction welds. Frankel, P., Preuss, M., Steuwer, A., Withers, P. J. & Bray, S. Materials Science and Technology 25, 640–650 (2009). doi: https://doi.org/10.1179/174328408X332825.
Evidence of the transition from ordered to disordered growth during rapid solidification of an intermetallic phase. Hartmann, H., Holland-Moritz, D., Galenko, P. K. & Herlach, D. M. Europhysics Letters 87, 40007–1-40007–6 (2009). doi: https://doi.org/10.1209/0295-5075/87/40007.
Fatigue crack growth and load redistribution in Ti/SiC composites observed in situ. Hung, Y. C., Bennett, J. A., Garcia-Pastor, F. A., Di Michiel, M., Buffière, J. Y., T.J.A., D., Bowen, P. & Withers, P. J. Acta Materialia 57, 590–599 (2009). doi: https://doi.org/10.1016/j.actamat.2008.09.042.
The carbon dioxide-water interface at conditions of gas hydrate formation. Lehmkühler, F., Paulus, M., Sternemann, C., Lietz, D., Venturini, F., Gutt, C. & Tolan, M. Journal of the American Chemical Society 131, 585–589 (2009). doi: https://doi.org/10.1021/ja806211r.
Time-resolved x-ray diffraction study of laser-induced shock and acoustic waves in single crystalline silicon. Liss, K. D., d'Almeida T., Kaiser, M., Hock, R., Magerl, A. & Eloy, J. F. Journal of Applied Physics 106, 044914–1-044914–6 (2009). doi: https://doi.org/10.1063/1.3204968.
Layering of [BMIM](+)-based ionic liquids at a charged sapphire interface. Mezger, M., Schramm, S., Schroder, H., Reichert, H., Deutsch, M., De Souza, E. J., Okasinski, J. S., Ocko, B. M., Honkimaki, V. & Dosch, H. Journal of Chemical Physics 131, 094701 (2009). doi: https://doi.org/10.1063/1.3212613.
Imaging the inside of a continuous nanoceramic synthesizer under supercritical water conditions using high-energy synchrotron X-radiation. Middelkoop, V., Boldrin, P., Peel, M., Buslaps, T., Barnes, P., Darr, J. A. & S.D.M., J. Chemistry of Materials 21, 2430–2435 (2009). doi: https://doi.org/10.1021/cm900118z.
Residual stresses in inertia-friction-welded dissimilar high-strength steels. Moat, R. J., Hughes, D. J., Steuwer, A., Iqbal, N., Preuss, M., Bray, S. E. & Rawson, M. Metallurgical and Materials Transactions A 40, 2098–2108 (2009). doi: https://doi.org/10.1007/s11661-009-9915-0.
Spatiotemporal Multitechnique Imaging of a Catalytic Solid in Action: Phase Variation and Volatilization During Molybdenum Oxide Reduction. O'Brien, M. G., Beale, A. M., Jacques, S. D. M., Di Michiel, M. & Weckhuysen, B. M. Chemcatchem 1, 99–102 (2009). doi: https://doi.org/10.1002/cctc.200900042.
Coupling of in-situ X-ray Microtomography Observations with Discrete Element Simulations - Application to Powder Sintering. Olmos, L., Bouvard, D., Martin, C. L., Bellet, D. & Di Michiel, M. Powders and Grains 2009 1145, 937–+ (2009). .
Investigation of the Sintering of Heterogeneous Powder Systems by Synchrotron Microtomography and Discrete Element Simulation. Olmos, L., Martin, C. L., Bouvard, D., Bellet, D. & Di Michiel, M. Journal of the American Ceramic Society 92, 1492–1499 (2009). doi: https://doi.org/10.1111/j.1551-2916.2009.03037.x.
Analysing the sintering of heterogeneous powder structures by in situ microtomography. Olmos, L., Takahashi, T., Bouvard, D., Martin, C. L., Salvo, L., Bellet, D. & Di Michiel, M. Philosophical Magazine 89, 2949–2965 (2009). doi: https://doi.org/10.1080/14786430903150225.
Structured scintillators for X-ray imaging with micrometre resolution. Olsen, U. L., Schmidt, S., Poulsen, H. F., Linnros, J., Yun, S. H., Di Michiel, M. & Martin, T. Nuclear Instruments & Methods in Physics Research Section A-accelerators Spectrometers Detectors and Associated Equipment 607, 141–144 (2009). doi: https://doi.org/10.1016/j.nima.2009.03.139.
Synchrotron-based radioscopy employing spatio-temporal micro-resolution for studying fast phenomena in liquid metal foams. Rack, A., García-Moreno, F., Baumbach, T. & Banhart, J. Journal of Synchrotron Radiation 16, 432–434 (2009). doi: https://doi.org/10.1107/S0909049509001939.
High-energy X-ray diffuse scattering. Ramsteiner, I. B., Schöps, A., Reichert, H., Dosch, H., Honkimäki, V., Zhong, Z. & Hastings, J. B. Journal of Applied Crystallography 42, 392–400 (2009). doi: https://doi.org/10.1107/S0021889809011492.
3D-Quantification of the distribution of continuous fibres in unidirectionally reinforced composites. Requena, G., Fiedler, G., Seiser, B., Degischer, P., Di Michiel, M. & Buslaps, T. Composites Part A-applied Science and Manufacturing 40, 152–163 (2009). doi: https://doi.org/10.1016/j.compositesa.2008.10.014.
Effect of the forging pressure on the microstructure and residual stress development in Ti–6Al–4V linear friction welds. Romero, J., Attallah, M. M., Preuss, M., Karadge, M. & Bray, S. E. Acta Materialia 57, 5582–5592 (2009). doi: https://doi.org/10.1016/j.actamat.2009.07.055.
High-Z crystals for gamma-ray optics. Rousselle, J., von Ballmoos P., Barrière, N., Abrosimov, N. V., Bastie, P., Bonnetto, G., Camus, T., Courtois, P., Jentschel, M., Lecomte, E., Rivière, E. & Roudil, G., in 74370L1–74370L10. (2009). doi: https://doi.org/10.1117/12.825245.
Determination of residual stresses around blisters in Zr-2.5%Nb pressure tubes. Santisteban, J. R., Steuwer, A., Domizzi, G. & Peel, M. J. Powder Diffraction 24, S72-S76 (2009). doi: https://doi.org/10.1154/1.3139056.
Synchrotron Radiation Techniques for the Characterization of Nb3Sn Superconductors. Scheuerlein, C., Di Michiel, M. & Buta, F. Ieee Transactions on Applied Superconductivity 19, 2653–2656 (2009). doi: https://doi.org/10.1109/TASC.2009.2019101.
Radiation-induced premelting of ice at silica interfaces. Schöder, S., Reichert, H., Schröder, H., Mezger, M., Okasinski, J. S., Honkimäki, V., Bilgram, J. & Dosch, H. Physical Review Letters 103, 095502–1-095502–4 (2009). doi: https://doi.org/10.1103/PhysRevLett.103.095502.
Phase selection in undercooled Ti-Al-Nb melts. Shuleshova, O., Holland-Moritz, D., Lindenkreuz, H. G., Löser, W. & Büchner, B. The 13th International Conference on Rapidly Quenched and Metastable Materials - 144, 012118–1-012118–4 (2009). doi: https://doi.org/10.1088/1742-6596/144/1/012118.
In situ observation of phase selection in undercooled Ni-Al melts. Shuleshova, O., Holland-Moritz, D., Löser, W., Lindenkreuz, H. G. & Büchner, B. International Journal of Cast Metals Research 22, 286–289 (2009). doi: https://doi.org/10.1179/136404609X367993.
Metastable formation of decagonal quasicrystals during solidification of undercooled Al-Ni melts: In situ observations by synchrotron radiation. Shuleshova, O., Holland-Moritz, D., Löser, W., Reinhart, G., Iles, G. N. & Büchner, B. Europhysics Letters 86, 36002–1-36002–4 (2009). doi: https://doi.org/10.1209/0295-5075/86/36002.
Polarimetry study with a CdZnTe focal plane detector. Nuclear Science Symposium Conference Record (NSS/MIC), 2009 IEEE -, da Silva R.M., C., Auricchio, N., Caroli, E., Donati, A., Maia, J. M., Schiavone, F., Stephen, J. B., Trindade, A., Del Sordo, S. & Honkimäki, V., in 464–467. (2009). doi: https://doi.org/10.1109/NSSMIC.2009.5401600.
High energy X-ray nanofocusing by silicon planar lenses. Snigirev, A., Snigireva, I., Grigoriev, M., Yunkin, V., Di Michiel, M., Vaughan, G. B. M., Kohn, V. & Kuznetsov, S. 9th International Conference on X-ray Microscopy 186, UNSP 012072 (2009). doi: https://doi.org/10.1088/1742-6596/186/1/012072.
Evidence of stress-induced hydrogen ordering in zirconium hydrides. Steuwer, A., Santisteban, J. R., Preuss, M., Peel, M. J., Buslaps, T. & Harada, M. Acta Materialia 57, 145–152 (2009). doi: https://doi.org/10.1016/j.actamat.2008.08.061.
Friction stir welding of aluminium alloys. Threadgill, P., Leonard, A. J., Shercliff, H. R. & Withers, P. J. International Materials Reviews 54, 49–93 (2009). doi: https://doi.org/10.1179/174328009X411136.
Modelling and experimental characterisation of a residual stress field in a ferritic compact tension specimen. Wenman, M. R., Price, A. J., Steuwer, A., Chard-Tuckey, P. R. & Crocombe, A. International Journal of Pressure Vessels and Piping 86, 830–837 (2009). doi: https://doi.org/10.1016/j.ijpvp.2009.10.006.
The effect of tensioning and sectioning on residual stresses in aluminium AA7749 friction stir welds. Altenkirch, J., Steuwer, A., Peel, M., Richards, D. G. & Withers, P. J. Materials Science and Engineering A 488, 16–24 (2008). doi: https://doi.org/10.1016/j.msea.2007.10.055.
Mechanical tensioning of high-strength aluminum alloy friction stir welds. Altenkirch, J., Steuwer, A., Peel, M. J., Withers, P. J., Williams, S. W. & Poad, M. Metallurgical and Materials Transactions A 39, 3246–3259 (2008). doi: https://doi.org/10.1007/s11661-008-9668-1.
Robotic sample manipulation for stress and texture determination on neutron and synchrotron X-ray diffractometers. Altenkirch, J., Steuwer, A., Withers, P. J., Buslaps, T. & Berger, U. Nuclear Instruments and Methods in Physics Research A 584, 428–435 (2008). doi: https://doi.org/10.1016/j.nima.2007.10.012.
Residual strains and microstructure development in single and sequential double sided friction stir welds in RQT-701 steel. Barnes, S. J., Steuwer, A., Mahawish, S., Johnson, R. & Withers, P. J. Materials Science and Engineering A 492, 35–44 (2008). doi: https://doi.org/10.1016/j.msea.2008.02.049.
X-ray tomographic reconstruction of macromolecular samples. Brockhauser, S., Di Michiel, M., McGeehan, J. E., McCarthy, A. A. & Ravelli, R. B. G. Journal of Applied Crystallography 41, 1057–1066 (2008). doi: https://doi.org/10.1107/S002188980802935X.
Fast processes in liquid metal foams investigated by high-speed synchrotron x-ray microradioscopy. Garcia-Moreno, F., Rack, A., Helfen, L., Baumbach, T., Zabler, S., Babcsan, N., Banhart, J., Martin, T., Ponchut, C. & Di Michiel, M. Applied Physics Letters 92, 134104 (2008). doi: https://doi.org/10.1063/1.2905748.
Nonequilibrium solidification in undercooled Ti45Al55 melts. Hartmann, H., Galenko, P. K., Holland-Moritz, D., Kolbe, M., Herfach, D. M. & Shuleshova, O. Journal of Applied Physics 103, 073509–1-073509–9 (2008). doi: https://doi.org/10.1063/1.2903920.
Investigation of creep cavity coalescence in brass by in-situ synchrotron X-Ray microtomography. Isaac, A., Dzieciol, K., Sket, F., di Michiel, M., Buslaps, T., Borbely, A. & Pyzalla, A. R. Developments in X-ray Tomography Vi 7078, 70781J (2008). doi: https://doi.org/10.1117/12.795941.
In situ 3D quantification of the evolution of creep cavity size, shape, and spatial orientation using synchrotron X-ray tomography. Isaac, A., Sket, F., Reimers, W., Camin, B., Sauthoff, G. & Pyzalla, A. R. Materials Science and Engineering A 478, 108–118 (2008). doi: https://doi.org/10.1016/j.msea.2007.05.108.
Mechanical behavior of a superalloy with a rafted microstructure: In situ evaluation of the effective stresses and plastic strain rates of each phase. Jacques, A., Diologent, F., Caron, P. & Bastie, P. 14th International Conference on the Strength of Materials - 483-484, 568–571 (2008). doi: https://doi.org/10.1016/j.msea.2006.10.182.
In-situ characterization of phase transformations and microstructure evolution in a gamma-TiAl based alloy. Structural Aluminides for Elevated Temeratures, Liss, K. D., Bartels, A., Clemens, H., Stark, A., Buslaps, T., Phelan, D. & Yeoh, L. A., in ed. Kim, Y. W., Morris, D., Yang, R. & Leyens, C., 137–144. (2008). .
Directional atomic rearrangements during transformations between the alpha- and gamma-phases in titanium aluminides. Liss, K. D., Stark, A., Bartels, A., Clemens, H., Buslaps, T., Phelan, D. & L.R.A., Y. Advanced Engineering Materials 10 -, 389–392 (2008). doi: https://doi.org/10.1002/adem.2007003221/1.
Initiation and growth of damage in a dual-phase steel observed by X-ray microtomography. Maire, E., Bouaziz, O., Di Michiel, M. & Verdu, C. Acta Materialia 56, 4954–4964 (2008). doi: https://doi.org/10.1016/j.actamat.2008.06.015.
Water and ice in contact with octadecyl-trichlorosilane functionalized surfaces: A high resolution X-ray reflectivity study. Mezger, M., Schöder, S., Reichert, H., Schröder, H., Okasinski, J., Honkimäki, V., Ralston, J., Bilgram, J., Roth, R. & Dosch, H. Journal of Chemical Physics 128, 244705–1-244705–13 (2008). doi: https://doi.org/10.1063/1.2931574.
Molecular layering of fluorinated ionic liquids at a charged sapphire (0001) surface. Mezger, M., Schröder, H., Reichert, H., Schramm, S., Okasinski, J. S., Schöder, S., Honkimäki, V., Deutsch, M., Ocko, B. M., Ralston, J., Rohwerder, M., Stratmann, M. & Dosch, H. Science 322, 424–428 (2008). doi: https://doi.org/10.1126/science.1164502.
Combinatorial high-energy x-ray microbeam study of the size-dependent oxidation of Pd nanoparticles on MgO(100). Nolte, P., Stierle, A., Kasper, N., Jin-Phillipp, N. Y., Reichert, H., Rühm, A., Okasinski, J., Dosch, H. & Schöder, S. Physical Review B 77, 115444–1-115444–7 (2008). doi: https://doi.org/10.1103/PhysRevB.77.115444.
Combined diffraction and tomography. Neutrons and Synchrotron Radiation in Engineering Materials Science - From Fundamentals to Material and Component Characterization, Pyzalla, A. R. & Isaac, A., in ed. Reimers, W., Pyzalla, A. R., Schreyer, A. & Clemens, H., 379–386. (2008). doi: https://doi.org/10.1002/9783527621927.ch22.
Synchrotron-based radioscopy with spatio-temporal micro-resolution using hard X-rays. Rack, A., García-Moreno, F., Betz, O., Zabler, S., Schmitt, C., dos Santos Rolo T., Ershov, A., Rack, T., Helfen, L., Banhart, J. & Baumbach, T., in 528–531. (2008). doi: https://doi.org/10.1109/NSSMIC.2008.4775234.
Investigation of the stress fields around a fatigue crack in aluminium alloy 5091. Rahman, M., Fitzpatrick, M. E., Edwards, L., Pratihar, S., Peel, M., Steuwer, A. & Buslaps, T. Stress Evaluation in Materials Using Neutrons and Synchrotron Radiation 571-572, 119–+ (2008). doi: https://doi.org/10.4028/www.scientific.net/MSF.571-572.119.
X-ray tomography investigations on pebble bed structures. Reimann, J., Pieritz, R. A., Ferrero, C., di Michiel, M. & Rolli, R. Fusion Engineering and Design 83, 1326–1330 (2008). doi: https://doi.org/10.1016/j.fusengdes.2008.06.026.
Morphological clues to wet granular pile stability. Scheel, M., Seemann, R., Brinkmann, M., Di Michiel, M., Sheppard, A., Breidenbach, B. & Herminghaus, S. Nature Materials 7, 189–193 (2008). doi: https://doi.org/10.1038/nmat2117.
Liquid distribution and cohesion in wet granular assemblies beyond the capillary bridge regime. Scheel, M., Seemann, R., Brinkmann, M., Di Michiel, M., Sheppard, A. & Herminghaus, S. Journal of Physics-condensed Matter 20, 494236 (2008). doi: https://doi.org/10.1088/0953-8984/20/49/494236.
Electromagnetic levitation - ERSF experiments. 7th Pamir International Conference on Fundamental and Applied MHD -, Schetelat, P., Breville, T., Di Michiel, M. & Etay, J., in 1–6. (2008). .
Phase Transformations During the Reaction Heat Treatment of Internal Tin Nb3Sn Strands With High Sn Content. Scheuerlein, C., Di Michiel, M., Izquierdo, G. A. & Buta, F. Ieee Transactions on Applied Superconductivity 18, 1754–1760 (2008). doi: https://doi.org/10.1109/TASC.2008.2006912.
Residual stresses and void kinetics in AlSiC MMCs during thermal cycling. Schoebel, M., Requena, G., Kaminski, H., Degischer, H. P., Buslaps, T. & di Michiel, M. Stress Evaluation in Materials Using Neutrons and Synchrotron Radiation 571-572, 413–+ (2008). doi: https://doi.org/10.4028/www.scientific.net/MSF.571-572.413.
Substrate-dependence of the ice premelting at heterogeneous interfaces : an X-ray scattering study. Schöeder, S. Universität Stuttgart, Germany (PhD thesis) , (2008). doi: https://doi.org/10.18419/opus-6669.
Polarimetric performance of a Laue lens gamma-ray CdZnTe focal plane prototype. da Silva R.M., C., Caroli, E., Stephen, J. B., Pisa, A., Auricchio, N., Del Sordo, S., Frontera, F., Honkimäki, V., Schiavone, F., Donati, A., A.M.F., T. & Ventura, G. Journal of Applied Physics 104, 084903–1-084903–7 (2008). doi: https://doi.org/10.1063/1.3000092.
In situ tomographic investigation of brass during high-temperature creep. Sket, F., Isaac, A., Dzieciol, K., Sauthoff, G., Borbély, A. & Pyzalla, A. R. Scripta Materialia 59, 558–561 (2008). doi: https://doi.org/10.1016/j.scriptamat.2008.05.006.
Inter-granular residual stresses in polycrystalline aggregates: Finite element modelling and diffraction post-processing. Song, X., Zhang, S. Y., Dini, D. & Korsunsky, A. M. International Conference on Stress Evaluation using Neutrons and Synchrotron Radiation Proceedings - 571-572, 271–276 (2008). doi: https://doi.org/10.4028/www.scientific.net/MSF.571-572.271.
Performance of a Ge-microstrip detector and polarimeter. Spillmann, U., Bräuning, H., Hess, S., Beyer, H., Stöhlker, T., Dousse, J. C., Protic, D. & Krings, T. Review of Scientific Instruments 79, 083101–1-083101–8 (2008). doi: https://doi.org/10.1063/1.2963046.
Monte Carlo simulation to macro stress evaluation and micro strain analysis by neutron and synchrotron radiation diffraction. Sprauel, J. M. International Conference on Stress Evaluation using Neutrons and Synchrotron Radiation Proceedings - 571-572, 157–162 (2008). doi: https://doi.org/10.4028/www.scientific.net/MSF.571-572.157.
Residual stress driven creep cracking in AISI Type 316 stainless steel. Turski, M., Bouchard, P. J., Steuwer, A. & Withers, P. J. Acta Materialia 56, 3598–3612 (2008). doi: https://doi.org/10.1016/j.actamat.2008.03.045.
3D statistical analysis of a copper powder sintering observed in situ by synchrotron microtomography. Vagnon, A., Riviere, J. P., Missiaen, J. M., Bellet, D., Di Michiel, M., Josserond, C. & Bouvard, D. Acta Materialia 56, 1084–1093 (2008). doi: https://doi.org/10.1016/j.actamat.2007.11.008.
Investigations of phase selection in undercooled melts of Nd-Fe-B alloys using synchrotron radiation. Phase transformations in multicomponent melts, Volkmann, T., Strohmenger, J. & Herlach, D. M., in ed. Herlach, D. M., 227–244. (2008). .
Visualization by X-ray tomography of void growth and coalescence leading to fracture in model materials. Weck, A., Wilkinson, D. S., Maire, E. & Toda, H. Acta Materialia 56, 2919–2928 (2008). doi: https://doi.org/10.1016/j.actamat.2008.02.027.
Recent advances in residual stress measurement. Withers, P. J., Turski, M., Edwards, L., Bouchard, P. J. & Buttle, D. J. International Journal of Pressure Vessels and Piping 85, 118–127 (2008). doi: https://doi.org/10.1016/j.ijpvp.2007.10.007.
R&D progress on second-generation crystals for Laue lens applications. Barriere, N., von Ballmoos, P., Bastie, P., Courtois, P., Abrosimov, N. V., Andersen, K., Buslaps, T., Camus, T., Halloin, H., Jentschel, M., Knodlseder, J., Roudil, G., Serre, D. & Skinner, G. Optics for Euv, X-ray, and Gamma-ray Astronomy Iii 6688, 66880O (2007). doi: https://doi.org/10.1117/12.733993.
Caractérisation expérimentale de la déformation et de la rupture localisée dans une argilite. 18ème Congrès Français de Mécanique -, Bésuelle, P., Desrues, J., Viggiani, G. & Lenoir, N., in 1–6. (2007). .
Fully 3D: Shaping future synchrotron beamline strategies. Brockhauser, S., Di Michiel, M. & Ravelli, R. B. G. Acta Crystallographica A-foundation and Advances 63, S78–S78 (2007). doi: https://doi.org/10.1107/S0108767307098303.
High-pressure x-ray scattering and computer simulation studies of density-induced polyamorphism in silicon. Daisenberger, D., Wilson, M., McMillan, P. F., Quesada Cabrera, R., Wilding, M. C. & Machon, D. Physical Review B 75, 224118–1-214118–11 (2007). doi: https://doi.org/10.1103/PhysRevB.75.224118.
Yielding of metallic glass foam by percolation of an elastic buckling instability. Demetriou, M. D., Hanan, J. C., Veazey, C., Di Michiel, M., Lenoir, N., Ustundag, E. & Johnson, W. L. Advanced Materials 19, 1957–+ (2007). doi: https://doi.org/10.1002/adma.200602136.
Phase transformations during the reaction heat treatment of powder-in-tube Nb3Sn superconductors. Di Michiel, M. & Scheuerlein, C. Superconductor Science & Technology 20, L55–L58 (2007). doi: https://doi.org/10.1088/0953-2048/20/10/L01.
Phase selection during solidification of undercooled Ti-Fe, Ti-Fe-O and Ti-Fe-Si-O melts-Influence of oxygen and silicon. Heinen, O., Holland-Moritz, D. & Herlach, D. M. Materials Science and Engineering A 449-451, 662–665 (2007). doi: https://doi.org/10.1016/j.msea.2006.02.328.
Synchrotron-radiation computed laminography for high-resolution three-dimensional imaging of flat devices. Helfen, L., Myagotin, A., Rack, A., Pernot, P., Mikulik, P., Di Michiel, M. & Baumbach, T. Physica Status Solidi A-applications and Materials Science 204, 2760–2765 (2007). doi: https://doi.org/10.1002/pssa.200775676.
Charge collection and depth sensing investigation on CZT driftt strip detectors. Kuvvetli, I., Budtz-Jørgensen, C., Caroli, E., Auricchio, N., Kalemci, E. & Stephen, J. B. Journal of Latex Class Files 6 -, 1–5 (2007). .
Volumetric digital image correlation applied to X-ray microtomography images from triaxial compression tests on argillaceous rock. Lenoir, N., Bornert, M., Desrues, J., Bésuelle, P. & Viggiani, G. Strain 43, 193–205 (2007). doi: https://doi.org/10.1111/j.1475-1305.2007.00348.x.
Fast tomography during continuous tensile tests -. Maire, E., Carmona, V., Di Michiel, M. & Ludwig, W. Materia Japan , 822–824 (2007). .
Polyamorphism and liquid-liquid phase transitions: Challenges for experiment and theory. McMillan, P. F., Wilson, M., Wilding, M. C., Daisenberger, D., Mezouar, M. & Neville Greaves, G. Journal of Physics Condensed Matter 19, 415101–1-415101–41 (2007). doi: https://doi.org/10.1088/0953-8984/19/41/415101.
Crossed planar X-ray lenses made from nickel for X-ray micro focusing and imaging applications. Nazmov, V., Reznikova, E., Last, A., Mohr, J., Saile, V., DiMichiel, M. & Göttert, J. Nuclear Instruments and Methods in Physics Research A 582, 120–122 (2007). doi: https://doi.org/10.1016/j.nima.2007.08.076.
X-ray lenses fabricated by LIGA technology. SYNCHROTRON RADIATION INSTRUMENTATION: Ninth International Conference on Synchrotron Radiation Instrumentation -, Nazmov, V., Reznikova, E., Last, A., Mohr, J., Saile, V., Simon, R. & DiMichiel, M., in 770–773. (2007). doi: https://doi.org/10.1063/1.2436174.
Development of a high-efficiency high-resolution imaging detector for 30-80 keV X-rays. Olsen, U. L., Badel, X., Linnros, J., Di Michiel, M., Martin, T., Schmidt, S. & Poulsen, H. F. Nuclear Instruments & Methods in Physics Research Section A-accelerators Spectrometers Detectors and Associated Equipment 576, 52–55 (2007). doi: https://doi.org/10.1016/j.nima.2007.01.119.
Giant metal compression at liquid-solid (Pb-Si, In-Si) Schottky junctions. Reichert, H., Denk, M., Okasinski, J., Honkimäki, V. & Dosch, H. Physical Review Letters 98, 116101–1-116101–4 (2007). doi: https://doi.org/10.1103/PhysRevLett.98.116101.
Direct simulation of the high temperature optical behaviour of a porous medium based on a CT image. Rousseau, B., Canizares, A., Meneses, D. D. S., Matzen, G., Echegut, P., Di Michiel, M. & Thovert, J. F. Colloids and Surfaces A-physicochemical and Engineering Aspects 300, 162–168 (2007). doi: https://doi.org/10.1016/j.colsurfa.2006.12.038.
Temperature effect (300-1500 K) on the infrared photon transport inside an X-ray microtomographic reconstructed porous silica glass. Rousseau, B., Di Michiel, M., Canizares, A., Meneses, D. D., Echegut, P. & Thovert, J. F. Journal of Quantitative Spectroscopy & Radiative Transfer 104, 257–265 (2007). doi: https://doi.org/10.1016/j.jqsrt.2006.07.015.
Prediction of the thermal radiative properties of an x-ray mu-tomographied porous silica glass. Rousseau, B., Meneses, D. D., Echegut, P., Di Michiel, M. & Thovert, J. F. Applied Optics 46, 4266–4276 (2007). doi: https://doi.org/10.1364/AO.46.004266.
On the formation of voids in internal tin Nb3Sn superconductors. Scheuerlein, C., Di Michiel, M. & Haibel, A. Applied Physics Letters 90, 132510 (2007). doi: https://doi.org/10.1063/1.2716346.
Thermal expansion, internal stresses and porosity distribution in AlSiCp MMC. Schobel, M., Requena, G., Degischer, H. P., Kaminski, H., Buslaps, T. & di Michiel, M. Materialwissenschaft Und Werkstofftechnik 38, 927–933 (2007). doi: https://doi.org/10.1002/mawe.200700200.
Silicon planar lenses for high energy X-ray nanofocusing. Snigirev, A., Snigirevaa, I., Grigoriev, M., Yunkin, V., Di Michiel, M., Kuznetsov, S. & Vaughan, G. B. M. Advances in X-ray/euv Optics and Components Ii 6705, 670506 (2007). doi: https://doi.org/10.1117/12.733609.
Focusing high energy X-rays with stacked Fresnel zone plates. Snigireva, I., Snigirev, A., Kohn, V., Yunkin, V., Grigoriev, M., Kuznetsov, S., Vaughan, G. B. M. & Di Michiel, M. Physica Status Solidi A-applications and Materials Science 204, 2817–2823 (2007). doi: https://doi.org/10.1002/pssa.200675702.
Hard X-ray focusing by stacked Fresnel zone plates. Snigireva, I., Snigirev, A., Kohn, V., Yunkin, V., Grigoriev, M., Kuznetsov, S., Vaughan, G. B. M. & Di Michiel, M. Advances in X-ray/euv Optics and Components Ii 6705, 67050G (2007). doi: https://doi.org/10.1117/12.732404.
Stacked Fresnel zone plates for high energy x-rays. Snigireva, I., Snigirev, A., Vaughan, G. B. M., Di Michiel, M., Kohn, V., Yunkin, V. & Grigoriev, M. Synchrotron Radiation Instrumentation, Pts 1 and 2 879, 998–+ (2007). .
A 2D position sensitive germanium detector for spectroscopy and polarimetry of high-energetic X-rays. Stöhlker, T., Spillmann, U., Banás, D., Beyer, H. F., Dousse, J. C., Chatterjee, S., Hess, S., Kozhuharov, C., Kavčič, M., Krings, T., Protic, D., Reuschl, R., Szlachetko, J., Tashenov, S. & Trotsenko, S. 13th International Conference on the Physics of Highly Charged Ions - 58, 411–414 (2007). doi: https://doi.org/10.1088/1742-6596/58/1/094.
Residual stress driven creep cracking of pressure vessel steels. 3rd International Conference on Integrity of High Temperature Welds -, Turski, M., Bouchard, P. J. & Withers, P. J., in ed. Allen, D. J., 1–10. (2007). .
Mapping residual and internal stress in materials by neutron diffraction. Withers, P. J. Comptes Rendus Physique 8, 806–820 (2007). doi: https://doi.org/10.1016/j.crhy.2007.09.015.
Residual stress and its role in failure. Withers, P. J. Reports on Progress in Physics 70, 2211–2264 (2007). doi: https://doi.org/10.1088/0034-4885/70/12/R04.
Second generation crystals for Laue lens applications. Space Telescopes and Instrumentation II: Ultraviolet to Gamma Ray -, Barrière, N., von Ballmoos P., Bastie, P., Courtois, P., Abrosimov, N. V., Andersen, K., Halloin, H., Skinner, G. & Smither, R. K., in 62662D-1–62662D-9. (2006). doi: https://doi.org/10.1117/12.672363.
Advances in synchrotron radiation microtomography. Baruchel, J., Buffiere, J. Y., Cloetens, P., Di Michiel, M., Ferrie, E., Ludwig, W., Maire, E. & Salvo, L. Scripta Materialia 55, 41–46 (2006). doi: https://doi.org/10.1016/j.scriptamat.2006.02.012.
X-ray micro CT for studying strain localization in clay rocks under triaxial compression. GeoX 2006 -, Bésuelle, P., Viggiani, G., Lenoir, N., Desrues, J. & Bornert, M., in ed. Desrues, J., Viggiani, G. & Bésuelle, P., 35–52. (2006). doi: https://doi.org/10.1002/9780470612187.ch2.
X-ray microtomography analysis of dynamic damage in tantalum. Bontaz-Carion, J. & Pellegrini, Y. P. Advanced Engineering Materials 8 -, 480–486 (2006). doi: https://doi.org/10.1002/adem.200600058.
Compton scattering studies of 4f ferromagnetism. Cooper, M. J., Duffy, J. A., Banfield, Z. F., Bebb, A. M., Blaauw, L., Shenton-Taylor, C., Steer, C. & Taylor, J. W. 20. International Conference on X-ray and Inner-Shell Processes - 75, 1638–1645 (2006). doi: https://doi.org/10.1016/j.radphyschem.2005.07.034.
Temperature dependence of lattice mismatch and gamma' volume fraction of a fourth-generation monocrystalline nickel-based superalloy. Diologent, F., Caron, P., d'Almeida T., Chambreland, S., Jacques, A. & Bastie, P. International Journal of Materials Research 97, 1136–1142 (2006). .
Relaxation of residual stresses in and around mechanical fasteners due to fatigue loading. Fox, M. E. & Withers, P. J. Materials Science Forum 524-525 -, 153–158 (2006). doi: https://doi.org/10.4028/www.scientific.net/MSF.524-525.153.
Residual stress analysis around foreign object damage using synchrotron diffraction. Frankel, P., Ding, J., Preuss, M., Byrne, J. & Withers, P. J. Materials Science Forum 524-525 -, 291–296 (2006). doi: https://doi.org/10.4028/www.scientific.net/MSF.524-525.291.
Evaluation by synchrotron radiation of shape factor effects on residual stress in nitrided layers. Goret, V., Fabre, A., Barralier, L. & Vardon, P. Materials Science Forum 524-525 -, 285–290 (2006). doi: https://doi.org/10.4028/www.scientific.net/MSF.524-525.285.
In situ diffraction studies of the phase selection in undercooled TiFeSiO melts. Heinen, O., Holland-Moritz, D., Herlach, D. M. & Kelton, K. F. Journal of Crystal Growth 286, 146–151 (2006). doi: https://doi.org/10.1016/j.jcrysgro.2005.09.020.
X-ray optics for liquid surface/interface spectrometers. Honkimaki, V., Reichert, H., Okasinski, J. S. & Dosch, H. Journal of Synchrotron Radiation 13, 426–431 (2006). doi: https://doi.org/10.1107/S0909049506031438.
Effective stresses and plastic strain rates in a superalloy: A high temperature in situ study by synchrotron X-ray TCD. Jacques, A., Ferry, O., Diologent, F., Caron, P. & Bastie, P. Materials Science Forum 524-525 -, 775–780 (2006). doi: https://doi.org/10.4028/www.scientific.net/MSF.524-525.775.
Anomalous diffraction at ultra-high energy for protein crystallography. Jakoncic, J., Di Michiel, M., Zhong, Z., Honkimaki, V., Jouanneau, Y. & Stojanoff, V. Journal of Applied Crystallography 39, 831–841 (2006). doi: https://doi.org/10.1107/S0021889806036387.
Effects of fatigue and fretting on residual stresses introduced by laser shock peening. King, A., Steuwer, A., Woodward, C. & Withers, P. J. Materials Science and Engineering A 435-436, 12–18 (2006). doi: https://doi.org/10.1016/j.msea.2006.07.020.
Measurement of crack bridging stresses in environment-assisted cracking of duplex stainless by synchrotron diffraction. Marrow, T. J., Steuwer, A., Mohammed, F., Engelberg, D. & Sarwar, M. Fatigue & Fracture of Engineering Materials & Structures 29, 464–471 (2006). doi: https://doi.org/10.1111/j.1460-2695.2006.01019.x.
Influence of relative density on the architecture and mechanical behaviour of a steel metallic wool. Masse, J. P., Salvo, L., Rodney, D., Bréchet, Y. & Bouaziz, O. Scripta Materialia 54, 1379–1383 (2006). doi: https://doi.org/10.1016/j.scriptamat.2005.11.075.
Temperature and concentration dependence of the effective pair interaction parameters in Ni-Pd from high-energy X-ray diffuse scattering. Mezger, M., Reichert, H., Ramsteiner, I. B., Udyansky, A., Shchyglo, O., Bugaev, V. N., Dosch, H. & Honkimäki, V. Physical Review B 73, 184206–1-184206–14 (2006). doi: https://doi.org/10.1103/PhysRevB.73.184206.
High-resolution in situ x-ray study of the hydrophobic gap at the water-octadecyl-trichlorosilane interface. Mezger, M., Reichert, H., Schöder, S., Okasinski, J., Schröder, H., Dosch, H., Palms, D., Ralston, J. & Honkimäki, V. Proceedings of the National Academy of Sciences of the USA 103, 18401–18404 (2006). doi: https://doi.org/10.1073/pnas.0608827103.
Investigation of reference samples for residual strain measurements in a welded specimen by neutron and synchrotron X-ray diffraction. Paradowska, A., Finlayson, T. R., J.W.H., P., Ibrahim, R., Steuwer, A. & Ripley, M. 8. International Conference on Neutron Scattering - 385-386, 904–907 (2006). doi: https://doi.org/10.1016/j.physb.2006.05.245.
High-energy X-ray and transmission electron microscopy study of structural transformations in Ti-V. Ramsteiner, I. B., Schöps, A., Phillipp, F., Kelsch, M., Reichert, H., Dosch, H. & Honkimäki, V. Physical Review B 73, 024204–1-024204–7 (2006). doi: https://doi.org/10.1103/PhysRevB.73.024204.
Topology of compressed pebble beds. Reimann, J., Pieritz, R. A. & Rolli, R. Fusion Engineering and Design 81, 653–658 (2006). doi: https://doi.org/10.1016/j.fusengdes.2005.06.375.
Synergy of gene-mediated immunoprophylaxis and microbeam radiation therapy for advanced intracerebral rat 9L gliosarcomas. Smilowitz, H. M., Blattmann, H., Brauer-Krisch, E., Bravin, A., Di Michiel, M., Gebbers, J. O., Hanson, A. L., Lyubimova, N., Slatkin, D. N., Stepanek, J. & Laissue, J. A. Journal of Neuro-oncology 78, 135–143 (2006). doi: https://doi.org/10.1007/s11060-005-9094-9.
Aspects of residual stress determination using energy-dispersive synchrotron X-ray diffraction. Steuwer, A., Peel, M. & Buslaps, T. Materials Science Forum 524-525, 267–272 (2006). doi: https://doi.org/10.4028/www.scientific.net/MSF.524-525.267.
Metastable phase formation in undercooled Nd-Fe-B alloys investigated by in-situ diffraction using synchrotron radiation. Strohmenger, J., Volkmann, T., Gao, J. & Herlach, D. M. Materials Science Forum 508, 81–86 (2006). doi: https://doi.org/10.4028/www.scientific.net/MSF.508.81.
In-situ 3D investigation by fast X-ray microtomography of the microstructural changes occurring during partial remelting of Al-Cu alloys. Suery, M., Salvo, L., Josserond, C. & Di Michiel, M. Semi- Solid Processing of Alloys and Composites 116-117, 231–234 (2006). doi: https://doi.org/10.4028/www.scientific.net/SSP.116-117.231.
Deformation of steel powder compacts during sintering: Correlation between macroscopic measurement and in situ microtomography analysis. Vagnon, A., Lame, O., Bouvard, D., Di Michiel, M., Bellet, D. & Kapelski, G. Acta Materialia 54, 513–522 (2006). doi: https://doi.org/10.1016/j.actamat.2005.09.030.
Residual stresses in cold drawn pearlitic rods. Atienza, J. M., Ruiz-Hervias, J., Martinez-Perez, M. L., Mompeán, F. J., García-Hernández, M. & Elices, M. Scripta Materialia 52, 1223–1228 (2005). doi: https://doi.org/10.1016/j.scriptamat.2005.03.003.
Spin-resolved Compton scattering study of RuSr2GdCu2O8. Banfield, Z. F., Duffy, J. A., Taylor, J. W., Steer, C. A., Bebb, A., Cooper, M. J., Blaauw, L., Shenton-Taylor, C. & Ruiz-Bustos, R. Journal of Physics Condensed Matter 17, 5533–5540 (2005). doi: https://doi.org/10.1088/0953-8984/17/36/009.
Temperature and field dependence of the spin magnetization density in SmMn2Ge2. Bebb, A. M., Taylor, J. W., Duffy, J. A., Banfield, Z. F., Cooper, M. J., Lees, M. R., McCarthy, J. E. & Timms, D. N. Physical Review B 71, 024407–1-024407–5 (2005). doi: https://doi.org/10.1103/PhysRevB.71.024407.
Structural studies of oriented carbon nanotubes in alumina channels using high energy X-ray diffraction. Burian, A., Dore, J. C., Kyotani, T. & Honkimäki, V. Carbon 43, 2723–2729 (2005). doi: https://doi.org/10.1016/j.carbon.2005.05.032.
MPI builds a unique spectrometer. Capellas, M. ESRF Newsletter 41 -, 15 (2005). .
Synchrotron evaluation of residual stress in a leucite reinforced glass ceramic. Carradó, A. & Barrallier, L. Materials Science Forum 490-491 -, 527–532 (2005). doi: https://doi.org/10.4028/www.scientific.net/MSF.490-491.527.
Fast microtomography using high energy synchrotron radiation. Di Michiel, M., Merino, J. M., Fernandez-Carreiras, D., Buslaps, T., Honkimaki, V., Falus, P., Martins, T. & Svensson, O. Review of Scientific Instruments 76, 043702 (2005). doi: https://doi.org/10.1063/1.1884194.
Phase selection during solidification of undercooled TiFeSiO melts. Holland-Moritz, D., Heinen, O. & Herlach, D. M. International Conference on Advances in Solidification Processes - 413-414, 403–407 (2005). doi: https://doi.org/10.1016/j.msea.2005.09.025.
Electromagnetic levitation apparatus for diffraction investigations on the short-range order of undercooled metallic melts. Holland-Moritz, D., Schenk, T., Convert, P., Hansen, T. & Herlach, D. M. Measurement Science and Technology 16, 372–380 (2005). doi: https://doi.org/10.1088/0957-0233/16/2/007.
Residual stress mapping in railway rails. Kelleher, J. F., Buttle, D. J., Mummery, P. M. & Withers, P. J. Materials Science Forum 490-491, 165–170 (2005). doi: https://doi.org/10.4028/www.scientific.net/MSF.490-491.165.
Synchrotron X-ray radiation diffraction studies of thermal expansion, free volume change and glass transition phenomenon in Cu-based glassy and nanocomposite alloys on heating. Louzguine, D. V., Yavari, A. R., Ota, K., Vaughan, G. B. M. & Inoue, A. Journal of Non-Crystalline Solids 351, 1639–1645 (2005). doi: https://doi.org/10.1016/j.jnoncrysol.2005.04.054.
In-situ three dimensional microstructural investigation of solidification of an Al-Cu alloy by ultrafast X-ray microtomography. Ludwig, O., DiMichiel, M., Salvo, L., Suéry, M. & Falus, P. Metallurgical and Materials Transactions A 36, 1515–1523 (2005). doi: https://doi.org/10.1007/s11661-005-0243-8.
LIGA fabrication of X-ray nickel lenses. Nazmov, V., Reznikova, E., Snigirev, A., Snigireva, I., DiMichiel, M., Grigoriev, M., Mohr, J., Matthis, B. & Saile, V. Microsystem Technologies 11, 292–297 (2005). doi: https://doi.org/10.1007/s00542-004-0435-y.
Glass transition T-g and thermal expansion in glassy materials measured by time-resolved X-ray diffraction. Ota, K., Hajlaoui, K., Vaughan G. B. M.and Di Michiel, M., Louzguine, D. V., Inoue, A. & Yavari, A. R. Metastable, Mechanically Alloyed and Nanocrystalline Materials 24-25, 225–228 (2005). doi: https://doi.org/10.4028/www.scientific.net/JMNM.24-25.225.
Solidification of undercooled peritectic FeGe alloy. Phanikumar, G., Biswas, K., Funke, O., Holland-Moritz, D., Herlach, D. M. & Chattopadhyay, K. Acta Materialia 53, 3591–3600 (2005). doi: https://doi.org/10.1016/j.actamat.2005.03.053.
Synchrotron radiation induced damage in thermal aluminium absorbers. Pinto, H. C., Pyzalla, A. R., Reimers, W., Buslaps, T., Honkimäki, V., Zhang, L., Dabin, Y. & Wroblewski, T. Materials Science and Technology 21 -, 19–26 (2005). doi: https://doi.org/10.1179/174328405X14065.
Experimental comparison of pixel detector arrays and CCD-based systems for X-ray area detection on synchrotron beamlines. Ponchut, C., Zontone, F. & Graafsma, H. 14. International Workshop on Room-Temperature Semiconductor X- and Gamma Ray Detectors - 52, 1760–1765 (2005). doi: https://doi.org/10.1109/TNS.2005.856624.
Simultaneous tomography and diffraction analysis of creep damage. Pyzalla, A., Camin, B., Buslaps, T., Di Michiel, M., Kaminski, H., Kottar, A., Pernack, A. & Reimers, W. Science 308, 92–95 (2005). doi: https://doi.org/10.1126/science.1106778.
Simultaneous tomography and diffraction analysis of creep damage. Pyzalla, A., Camin, B., Buslaps, T., Di Michiel, M., Kaminski, H., Kottar, A., Pernack, A. & Reimers, W. ESRF Newsletter 41 -, 23 (2005). .
Competition between order and phase separation in Au-Ni. Reichert, H., Schöps, A., Ramsteiner, I., Bugaev, V. N., Shchyglo, O., Udyansky, A., Dosch, H., Asta, M., Drautz, R. & Honkimäki, V. Physical Review Letters 95, 235703–1-235703–4 (2005). doi: https://doi.org/10.1103/PhysRevLett.95.235703.
Inner structures of compressed pebble beds determined by X-ray tomography. Reimann, J., Pieritz, R. A., di Michiel, M. & Ferrero, C. Fusion Engineering and Design 75-79, 1049–1053 (2005). doi: https://doi.org/10.1016/j.fusengdes.2005.06.223.
Using X-ray microtomography for characterisation of catalyst particle pore structure. Ruffino, L., Mann, R., Oldman, R., Stitt, E. H., Boller, E., Cloetens, P., DiMichiel, M. & Merino, J. Canadian Journal of Chemical Engineering 83, 132–139 (2005). doi: https://doi.org/10.1002/cjce.5450830122.
High-resolution strain mapping in bulk samples using full-profile analysis of energy dispersive synchrotron X-ray diffraction data. Steuwer, A., Santisteban, J. R., Turski, M., Withers, P. J. & Buslaps, T. Nuclear Instruments & Methods in Physics Research Section B-beam Interactions with Materials and Atoms 238, 200–204 (2005). doi: https://doi.org/10.1016/j.nimb.2005.06.049.
The formation of a metastable peritectic phase in Nd-Fe-B alloys investigated by in situ X-ray diffraction during solidification. Strohmenger, J., Volkmann, T., Gao, J. & Herlach, D. M. International Conference on Advances in Solidification Processes - 413-414, 263–266 (2005). doi: https://doi.org/10.1016/j.msea.2005.08.162.
Compton scattering of elemental silicon at high pressure. Tse, J. S., Klug, D. D., Jiang, D. T., Sternemann, C., Volmer, M., Huotari, S., Hiraoka, N., Honkimäki, V. & Hämäläinen, K. Applied Physics Letters 87, 191905–1-191905–3 (2005). doi: https://doi.org/10.1063/1.2126125.
Excess free volume in metallic glasses measured by X-ray diffraction. Yavari, A. R., Le Moulec, A., Inoue, A., Nishiyama, N., Lupu, N., Matsubara, E., Botta, W. J., Vaughan, G. B. M., Di Michiel, M. & Kvick, A. Acta Materialia 53, 1611–1619 (2005). doi: https://doi.org/10.1016/j.actamat.2004.12.011.
In situ XRD studies of the hydration degree of the polymeric membrane in a fuel cell. Albertini, V. R., Paci, B., Generosi, A., Panero, S., Navarra, M. A. & di Michiel, M. Electrochemical and Solid State Letters 7, A519–A521 (2004). doi: https://doi.org/10.1149/1.1817888.
Characterization and modelling of germanium assembled crystals for the diffraction of thermal neutrons. Alianelli, L., del Río M., S. & Felici, R. Journal of Applied Crystallography 37, 732–742 (2004). doi: https://doi.org/10.1107/S0021889804015390.
1. A Monte Carlo algorithm for the simulation of Bragg scattering by imperfect crystals and II. Application to mosaic copper. Advances in Computational Methods for X-Ray and Neutron Optics -, Alianelli, L., del Río M., S. & Felici, R., in 27–38. (2004). .
Applications of synchrotron X-rays to radiotherapy. Blattmann, H., Gebbers, J. O., Brauer-Krisch, E., Bravin, A., Le Duc, G., Burkard, W., Di Michiel, M., Djonov, V., Slatkin, D. N., Stepanek, J. & Laissue, J. A. Nuclear Instruments & Methods in Physics Research Section A-accelerators Spectrometers Detectors and Associated Equipment 548, 17–22 (2004). doi: https://doi.org/10.1016/j.nima.2005.03.060.
Complementarity of various diffraction techniques applied to characterisation of residual stress in a palladium alloy. Carradó, A., Sprauel, J. M., Barrallier, L. & Lodini, A. 2. Conference on Stress Evaluation with Neutrons and Synchrotron Radiation - 12, 93–98 (2004). doi: https://doi.org/10.1080/10238160410001734513.
High-energy non-resonant X-ray magnetic scattering from EuAs3. Chatterji, T., Liss, K. D., Tschentscher, T., Janossy, B., Strempfer, J. & Brückel, T. Solid State Communications 131, 713–717 (2004). doi: https://doi.org/10.1016/j.ssc.2004.06.026.
On the creep behavior at 1033 K of new generation single-crystal superalloys. Diologent, F. & Caron, P. Materials Science and Engineering A 385, 245–257 (2004). doi: https://doi.org/10.1016/j.msea.2004.07.016.
Synchrotron radiation techniques for structural and morphological investigations on clusters: Present and future. d'Acapito F. EMRS 2003 Symposium F, Nanostructures from Clusters - 226, 313–320 (2004). doi: https://doi.org/10.1016/j.apsusc.2003.11.046.
Neutron and synchrotron radiation non-destructive methods for the characterisation of materials for different applications. Fiori, F., Albertini, G., Girardin, E., Giuliani, A., Manescu, A. & Rustichelli, F. Proceeding of the European Materials Research Society Fall Meeting- Symposium B - 382, 39–45 (2004). doi: https://doi.org/10.1016/j.jallcom.2004.05.071.
FaME38: A new approach to materials engineering at the ILL-ESRF. Hugues, D. J., Webster, P. J., Malard, B., Ratel, N., Sitepu, H. & Dale, A. 3rd European Conference on Neutron Scattering - 350, 110–112 (2004). doi: https://doi.org/10.1080/10238160410001726710.
X-ray hypersatellite spectra of hollow atoms. Huotari, S., Hämäläinen, K., Diamant, R., Sharon, R., Kao, C. C. & Deutsch, M. ICESS-9 - Proceeding of the 9th International Conference on Electronic Spectroscopy and Structure - 137-140, 293–297 (2004). doi: https://doi.org/10.1016/j.elspec.2004.02.023.
In situ measurement of the lattice parameter mismatch of a nickel-base single-crystalline superalloy under variable stress. Jacques, A., Diologent, F. & Bastie, P. Materials Science and Engineering A 387-389, 944–949 (2004). doi: https://doi.org/10.1016/j.msea.2003.12.080.
Bulk observation of metal powder sintering by X-ray synchrotron microtomography. Lame, O., Bellet, D., Di Michiel, M. & Bouvard, D. Acta Materialia 52, 977–984 (2004). doi: https://doi.org/10.1016/j.actamat.2003.10.032.
X-ray micro tomography characterization of strain localization upon deviatoric loading of saturated fine-grained stiff soils. Lenoir, N., Marello, S., Viggiani, G., Besuelle, P., Desrues, J. & Di Michiel, M. X-ray Ct for Geomaterials Soils, Concrete, Rocks , 147–155 (2004). .
Small d-spacing WSi2/Si narrow bandpass multilayers. X-Ray Sources and Optics -, Liu, C., Conley, R., Macrander, A. T., Graber, T., Morawe, C., Borel, C. & Dufresne, E. M., in 154–160. (2004). doi: https://doi.org/10.1117/12.561399.
Residual stress analysis in compositional gradient Ti + HA coatings on Ti6Al4V substrates for biomedical applications. Manescu, A., Albertini, G., Fogarassy, P., Lodini, A. & Markocsan, N. 2. Conference on Stress Evaluation with Neutrons and Synchrotron Radiation - 12, 147–152 (2004). doi: https://doi.org/10.1080/10238160410001734603.
Shear banding in plane strain compression of Beaucaire Marl studied through post-mortem X-ray micro tomography. Marello, S., Lenoir, N., Viggiani, G., Besuelle, P., Desrues, J. & Di Michiel, M. X-ray Ct for Geomaterials Soils, Concrete, Rocks , 139–146 (2004). .
Residual stresses in cold-drawn pearlite rods by high energy synchrotron radiation and thermal neutron diffraction. Martinez-Perez, M. L., Mompeán, F. J., Peng, R. L., Ruiz, J., Borlado, C. R., Atienza, J. M., Gil-Sevillano, J., García-Hernández, M., Elices, M. & Buslaps, T. 2. Conference on Stress Evaluation with Neutrons and Synchroton Radiation - 12, 175–180 (2004). doi: https://doi.org/10.1080/10238160410001734649.
Residual stress profiling in the ferrite and cementite phases of cold-drawn steel rods by synchrotron X-ray and neutron diffraction. Martinez-Perez, M. L., Mompeán, F. J., Ruiz-Hervias, J., Borlado, C. R., Atienza, J. M., García-Hernández, M., Elices, M., Gil-Sevillano, J., Peng, R. L. & Buslaps, T. Acta Materialia 52, 5303–5313 (2004). doi: https://doi.org/10.1016/j.actamat.2004.07.036.
The use of neutrons and monochromatic X-rays for non-destructive testing in geological materials. Masschaele, B., Dierick, M., Van Hoorebeke, L., Cnudde, V. & Jacobs, P. Environmental Geology 46, 486–492 (2004). doi: https://doi.org/10.1007/s00254-004-1050-z.
Refractive lenses fabricated by deep SR lithography and LIGA technology for X-ray energies from 1 keV to 1 MeV. 8. International Conference on Synchrotron Radiation Instrumentation -, Nazmov, V., Reznikova, E., Boerner, M., Mohr, J., Saile, V., Snigirev, A., Snigireva, I., DiMichiel, M., Drakopoulos, M., Simon, R. & Grigoriev, M., in 752–755. (2004). doi: https://doi.org/10.1063/1.1757905.
Fabrication and preliminary testing of X-ray lenses in thick SU-8 resist layers. Nazmov, V., Reznikova, E., Mohr, J., Snigirev, A., Snigireva, I., Achenbach, S. & Saile, V. Microsystem Technologies 10, 716–721 (2004). doi: https://doi.org/10.1007/s00542-004-0433-0.
Physical basis production design nickel planar X-ray refractive lens for range above 100 keV. Nazmov, V. P., Reznikova, E. F., Mohr, J., Zaïle, F., Snigirev, A. A., Snigireva, I. I., DiMichiel, M. & Grigoriev, M. V. Bulletin of the Russian Academy of Sciences: Physics 68 -, 482–489 (2004). .
Microstructure damage in thermal absorbers induced by high energy synchrotron light irradiation. Pinto, H. C., Pyzalla, A. R., Reimers, W., Buslaps, T., Honkimäki, V., Zhang, L. & Dabin, Y. 2. Conference on Stress Evaluation with Neutrons and Synchroton Radiation - 12, 189–194 (2004). doi: https://doi.org/10.1080/10238160410001734667.
Residual stresses in linear friction welded IMI550. Preuss, M., Quinta Da Fonseca, J., Steuwer, A., Wang, L., Withers, P. J. & Bray, S. 2. Conference on Stress Evaluation with Neutrons and Synchrotron Radiation - 12, 165–173 (2004). doi: https://doi.org/10.1080/10238160410001734630.
In-situ investigation of strain relaxation in an Al/Si-MMC using high energy synchrotron radiation. Pyzalla, A. R., Reetz, B., Jacques, A., Feiereisen, J. P., Ferry, O., Buslaps, T. & Reimers, W. Zeitschrift für Metallkunde 95, 624–630 (2004). doi: https://doi.org/10.3139/146.017998.
Relaxation of phase specific elastic strains/stresses during deformation of Al/Si - MMCs at elevated temperatures. Pyzalla, A. R., Reetz, B., Jacques, A., Feiereisen, J. P., Ferry, O., Buslaps, T. & Reimers, W. 2. Conference on Stress Evaluation with Neutrons and Synchroton Radiation - 12, 135–140 (2004). doi: https://doi.org/10.1080/10238160410001734586.
Polarization switching in BaTiO3 thin films measured by X-ray diffraction exploiting anomalous dispersion. van Reeuwijk S.J., Karakaya, K., Graafsma, H. & Harkema, S. Journal of Applied Crystallography 37, 193–199 (2004). doi: https://doi.org/10.1107/S0021889803028395.
A high-energy triple-axis X-ray diffractometer for the study of the structure of bulk crystals. Seitz, C., Weisser, M., Gomm, M., Hock, R. & Magerl, A. Journal of Applied Crystallography 37, 901–910 (2004). doi: https://doi.org/10.1107/S0021889804023805.
Nuclear fluorescence using high-energy synchrotron radiation. 8.International Conference on Synchrotron Radiation Instrumentation -, Siddons, D. P., Liss, K. D., Hastings, J. B. & Grübel, G., in 1178–1181. (2004). doi: https://doi.org/10.1063/1.1758010.
Hard X- and soft gamma-ray polarimetry with CdTe array prototypes. da Silva R.M., C., Auricchio, N., Caroli, E., Donati, A., Hage-Ali, M., Schiavone, F., Siffert, P., Stephen, J. B. & Ventura, G. 2003 IEEE Nuclear Science Symposium, Room-Temperature Semiconductor detector Workshop, Symposium on Nuclear power Systems (2003 NSS/RTSD/SNPS) - 51, 2478–2484 (2004). doi: https://doi.org/10.1109/TNS.2004.836137.
Sub-micron focusing of high energy X-rays with Ni refractive lenses. Snigirev, A., Snigireva, I., Di Michiel, M., Honkimaki, V., Grigoriev, M., Nazmov, V., Reznikova, E., Mohr, J. & Saile, V. Design and Microfabrication of Novel X-ray Optics Ii 5539, 244–250 (2004). doi: https://doi.org/10.1117/12.564545.
Sub-micron focusing of high energy X-rays with Ni refractive lenses. Design and Microfabrication of Novel X-Ray Optics II -, Snigirev, A., Snigireva, I., Di Michiel, M., Honkimäki, V., Grigoriev, M., Nazmov, V., Reznikova, E., Mohr, J. & Saile, V., in 244–250. (2004). .
Characterisation of microstructure and residual stresses in hydroxyapatite coatings on titanium prostheses. Stanic, V., Carradó, A., Fiori, F., Albertini, G. & Buslaps, T. 2. Conference on Stress Evaluation with Neutrons and Synchroton Radiation - 12, 117–122 (2004). doi: https://doi.org/10.1080/10238160410001734559.
High-resolution strain mapping in bulk samples using full-profile analysis of energy-dispersive synchrotron X-ray diffraction data. Steuwer, A., Santisteban, J. R., Turski, M., Withers, P. J. & Buslaps, T. Journal of Applied Crystallography 37, 883–889 (2004). doi: https://doi.org/10.1107/S0021889804023349.
Local structure of saccharose- and anthracene-based carbons studied by wide-angle high-energy X-ray scattering. Szczygielska, A., Burian, A., Dore, J. C., Honkimäki, V. & Duber, S. 6. International School and Symposium on Synchrotron Radiation in Natural Science (ISSRNS) - 362, 307–313 (2004). doi: https://doi.org/10.1016/S0925-8388(03)00604-2.
X-ray microtomography for studying localized deformation in fine-grained geomaterials under triaxial compression. Viggiani, G., Lenoir, N., Besuelle, P., Di Michiel, M., Marello, S., Desrues, J. & Kretzschmer, M. Comptes Rendus Mecanique 332, 819–826 (2004). doi: https://doi.org/10.1016/j.crme.2004.05.006.
Observation of a metastable phase during solidification of undercooled Nd-Fe-B alloy melts by in situ diffraction experiments using synchrotron radiation. Volkmann, T., Strohmenger, J., Gao, J. & Herlach, D. M. Applied Physics Letters 85, 2232–2234 (2004). doi: https://doi.org/10.1063/1.1794373.
Strain-induced structural changes in thin YBa2Cu3O7-x films on SrTiO3 substrates. Vonk, V., van Reeuwijk S.J., Dekkers, J. M., Harkema, S., A.J.H.M., R. & Graafsma, H. Thin Solid Films 449, 133–137 (2004). doi: https://doi.org/10.1016/j.tsf.2003.10.037.
Engineering applications of synchrotron X-rays and neutrons and the FaME38 project. Webster, P. J., Chen, Z., Hugues, D. J., Steuwer, A., Malard, B., Ratel, N., James, M. N. & Ting, S. P. ASME Interbational Mechanical Engineering Congress and Exposition - , 63–69 (2004). doi: https://doi.org/10.1115/IMECE2004-62451.
Optical constants for hard X-ray multilayers over the energy range E = 35 - 180 keV. Optics for EUV, X-Ray, and Gamma-Ray Astronomy -, Windt, D. L., Donguy, S., Hailey, C. J., Koglin, J., Honkimäki, V., Ziegler, E., Christensen, F. E. & Harrison, F. A., in 35–40. (2004). doi: https://doi.org/10.1117/12.505886.
Depth capabilities of neutron and synchrotron diffraction strain measurement instruments. I. The maximum feasible path length. Withers, P. J. Journal of Applied Crystallography 37, 596–606 (2004). doi: https://doi.org/10.1107/S0021889804012737.
Thermo-mechanical analysis and design optimization of Front-End compound refractive lens. Zhang, L., Snigirev, A., Snigireva, I., Naylor, G., Madsen, A., Zontone, F., Di Michiel, M. & Elleaume, P. Design and Microfabrication of Novel X-ray Optics Ii 5539, 48–58 (2004). doi: https://doi.org/10.1117/12.568105.
Observation of a sample-dependent 37 K anomaly on the lattice parameters of strontium titanate. Arzel, L., Hehlen, B., Dénoyer, F., Currat, R., Liss, K. D. & Courtens, E. Europhysics Letters 61, 653–659 (2003). doi: https://doi.org/10.1209/epl/i2003-00121-4.
A 1300 K furnace for in situ X-ray microtomography. Bellet, D., Gorges, B., Dallery, A., Bernard, P., Pereiro, E. & Baruchel, J. Journal of Applied Crystallography 36, 366–367 (2003). doi: https://doi.org/10.1107/S0021889803001158.
MOSFET dosimetry for microbeam radiation therapy at the European Synchrotron Radiation Facility. Brauer-Krisch, E., Bravin, A., Lerch, M., Rosenfeld, A., Stepanek, J., Di Michiel, M. & Laissue, J. A. Medical Physics 30, 583–589 (2003). doi: https://doi.org/10.1118/1.1562169.
A study of prototype CdTe hard X- and gamma-ray detectors. Caroli, E., Auricchio, N., Donati, A., Schiavone, F., Stephen, J. B., Ventura, G., da Silva R.M., C., Siffert, P., Hage-Ali, M. & Taiocchi, G. Nuclear Instruments and Methods in Physics Research A 513, 350–356 (2003). doi: https://doi.org/10.1016/j.nima.2003.08.061.
Experimental analysis and numerical simulation at metal-ceramic interface. Carradó, A., Sprauel, J. M., Barrallier, L. & Lodini, A. International Conference on Processing & Manufacturing of Advanced Materials. Processing, Fabrication, Properties, Applications - 426-432, 3963–3968 (2003). doi: https://doi.org/10.4028/www.scientific.net/MSF.426-432.3963.
The gamma/gamma' mismatch in Ni based superalloys: In situ measurements during a creep test. Diologent, F., Caron, P., d'Almeida T., Jacques, A. & Bastie, P. E-MRS 2002 Symposium I on Synchrotron Radiation and Materials Science - 200, 346–351 (2003). doi: https://doi.org/10.1016/S0168-583X(02)01699-3.
Dependence of the microstructure, residual stresses and texture of AA 6013 friction stir welds on the welding proces. E.B.F., L., Wegener, J., Dalle Donne, C., Goerigk, G., Wroblewski, T., Buslaps, T., Pyzalla, A. R. & Reimers, W. International Journal of Materials Research and Advanced Techniques - 94, 908–915 (2003). doi: https://doi.org/10.3139/146.030908.
Mechanical testing device for in situ experiments on reversibility of dislocation motion in silicon. Feiereisen, J. P., Ferry, O., Jacques, A. & George, A. E-MRS 2002 Symposium I on Synchrotron Radiation and Materials Science - 200, 339–345 (2003). doi: https://doi.org/10.1016/S0168-583X(02)01698-1.
High energy X-ray scattering studies of strongly correlated oxides. Hatton, P. D., Wilkins, S. B., Spencer, P. D., Zimmermann, M. V. & d'Almeida T. Journal of Physics D 36, A157-A161 (2003). doi: https://doi.org/10.1088/0022-3727/36/10A/332.
The evolution of the lattice parameter mismatch of a nickel-based superalloy during a high-temperature creep test. Jacques, A. & Bastie, P. Philosophical Magazine 83, 3005–3027 (2003). doi: https://doi.org/10.1080/1478643031000149108.
Structural studies of gas hydrates. Klapproth, A., Goreshnik, E., Staykova, D., Klein, H. & Kuhs, W. F. Canadian Journal of Physics 81, 503–518 (2003). doi: https://doi.org/10.1139/PO3-024.
Bulk observation of metallic powder sintering: First in situ synchrotron micro-tomograhic results. Lame, O., Bellet, D., Bouvard, D. & Di Michel, M. International Conference on Diffusion, Segregation and Stresses in Materials - 216-217, 285–292 (2003). doi: https://doi.org/10.4028/www.scientific.net/DDF.216-217.285.
In situ microtomography investigation of metal powder compacts during sintering. Lame, O., Bellet, D., Di Michiel, M. & Bouvard, D. Nuclear Instruments & Methods in Physics Research Section B-beam Interactions with Materials and Atoms 200, PII S0168-583X(02)01690-7 (2003). doi: https://doi.org/10.1016/S0168-583X(02)01690-7.
High-energy X-rays: A tool for advanced bulk investigations in materials science and physics. Liss, K. D., Bartels, A., Schreyer, A. & Clemens, H. Textures and Microstructures 35, 219–252 (2003). doi: https://doi.org/10.1080/07303300310001634952.
Kinetics of the field induced commensurate to ferro-electric phase transition in thiourea. Liss, K. D., Kaiser, M., Hlinka, J., Dénoyer, F., Hock, R. & Currat, R. Journal of Physics D 36 -, A172-A176 (2003). doi: https://doi.org/10.1088/0022-3727/36/10A/335.
ID15 - Depth-resolved investigation of friction stir welds using a novel strain and phase-mapping technique. Martins, R. V. & Honkimäki, V. ESRF Newsletter 38 -, 16 (2003). .
Structural analysis of CuInSe2 and CuIn3Se5 at different temperatures with synchrotron radiation. Merino, J. M., Di Michiel, M. & Leon, M. Journal of Physics and Chemistry of Solids 64, 1649–1652 (2003). doi: https://doi.org/10.1016/S0022-3697(03)00114-8.
Method for in situ texture investigation of recrystallization of Cu and Ti by high-energy synchrotron X-ray diffraction. Puig-Molina, A., Wenk, H. R., Berberich, F. & Graafsma, H. Zeitschrift für Metallkunde 94, 1199–1205 (2003). doi: https://doi.org/10.3139/146.031199.
In situ very-high-energy diffraction studies of thermal decomposition of transition metal trifluorides. Rau, J. V., Albertini, V. R., Chilingarov, N. S., Di Michiel, M., Colonna, S., Ioffe, I. N. & Sidorov, L. N. Bulletin of the Chemical Society of Japan 76, 1165–1169 (2003). doi: https://doi.org/10.1246/bcsj.76.1165.
Time-resolved X-ray diffraction study of the relaxation process of electric-field-induced strain in KD2PO4. van Reeuwijk S.J., Puig-Molina, A., Mathon, O., Tucoulou, R. & Graafsma, H. Journal of Applied Physics 94, 6708–6716 (2003). doi: https://doi.org/10.1063/1.1616634.
A new X-ray transmission-reflection scheme for the study of deeply buried interfaces using high-energy microbeams. Reichert, H., Honkimäki, V., Snigirev, A., Engemann, S. & Dosch, H. 7. International Conference on Surface X-ray and Neutron Scattering - 336, 46–55 (2003). doi: https://doi.org/10.1016/S0921-4526(03)00268-0.
X-ray micro-tomography an attractive characterisation technique in materials science. Salvo, L., Cloetens, P., Maire, E., Zabler, S., Blandin, J. J., Buffière, J. Y., Ludwig, W., Boller, E., Bellet, D. & Josserond, C. E-MRS 2002 Symposium I on Synchrotron Radiation and Materials Science - 200, 273–286 (2003). doi: https://doi.org/10.1016/S0168-583X(02)01689-0.
Experimental polarimetric study of a hard X-ray energy telescope prototype. da Silva R.M., C., Ayoub, M., Caroli, E., Donati, A., Hage-Ali, M., Schiavone, F., Siffert, P., Stephen, J. B. & Ventura, G. 2002 IEEE Nuclear Science Symposium (NSS) - 50, 1198–1203 (2003). doi: https://doi.org/10.1109/TNS.2003.815161.
Polarimetric performance of a prototype hard X-ray telescope. 2002 IEEE Nuclear Science Symposium and Medical Imaging Conference -, da Silva R.M., C., Ayoub, M., Caroli, E., Donati, A., Hage-Ali, M., Schiavone, F., Siffert, P., Stephen, J. B. & Ventura, G., in 161–165. (2003). .
Synchrotron texture analysis with area detectors. Wenk, H. R. & Grigull, S. Journal of Applied Crystallography 36, 1040–1049 (2003). doi: https://doi.org/10.1107/S0021889803010136.
W/SiC X-ray multilayers optimized for use above 100 keV. Windt, D. L., Donguy, S., Hailey, C. J., Koglin, J., Honkimäki, V., Ziegler, E., Christensen, F. E., C.M.H., C., Harrison, F. A. & Craig, W. W., in 639–646. (2003). doi: https://doi.org/10.1117/12.461303.
W/SiC X-ray multilayers optimized for use above 100keV. Windt, D. L., Donguy, S., Hailey, C. J., Koglin, J., Honkimäki, V., Ziegler, E., Christensen, F. E., Chen, H., Harrison, F. A. & Craig, W. W. Applied Optics 42, 2415–2421 (2003). doi: https://doi.org/10.1364/AO.42.002415.
Synthesis and magnetism of CoxRh1-x and CoxRu1-x nanoparticles. Zitoun, D., Amiens, C., Chaudret, B., Fromen, M. C., Lecante, P., Casanove, M. J. & Respaud, M. Journal of Physical Chemistry B 107, 6997–7005 (2003). doi: https://doi.org/10.1021/jp034215h.
Time-resolved x-ray diffraction measurements on CdS shocked along the c axis. d'Almeida , T., Di Michiel, M., Kaiser, M., Buslaps, T. & Fanget, A. Journal of Applied Physics 92, 1715–1717 (2002). doi: https://doi.org/10.1063/1.1491601.
Time-resolved x-ray diffraction on laser-shocked crystals. d'Almeida , T., Kaiser, M., Di Michiel, M., Buslaps, T. & Fanget, A. Surface Scattering and Diffraction for Advanced Metrology Ii 4780, 176–183 (2002). doi: https://doi.org/10.1117/12.469723.
High-energy X-ray Diffraction Studies of Battery Materials by Polychromatic and Monochromatic Radiation. Albertini, V. R., Ronci, F., Perfetti, P., Reale, P., Scrosati, B., Panero, S., Di Michiel, M. & Merino, J. M. Acta Crystallographica A-foundation and Advances 58, C7–C7 (2002). .
Low-T ferroelectricity in antiphase domain boundaries of SrTiO3. Arzel, L., Hehlen, B., Tagantsev, A. K., Dénoyer, F., Liss, K. D., Currat, R. & Courtens, E. Ferroelectrics 267 -, 317–322 (2002). doi: https://doi.org/10.1080/00150190211011.
Microbeam irradiation of the chorio-allantoic membrane (CAM) of chicken embryo. Blattmann, H., Burkard, W., Djonov, V., Di Michiel, M., Brauer, E., Stepanek, J., Bravin, A., Gebbers, J. O. & Laissue, J. A. Strahlentherapie Und Onkologie 178, 118–118 (2002). .
Curved surfaces in disordered carbons by high energy X-ray scattering. Burian, A., Szczygielska, A., Koloczek, J., Dore, J. C., Honkimäki, V. & Duber, S. Symposium on Synchrotron Crystallography Krynica-Czarny Potok 101, 751–759 - (2002). .
Curved surfaces in disordered carbons by high energy X-ray scattering. Burian, A., Szczygielska, A., Koloczek, J., Dore, J. C., Honkimäki, V. & Duber, S. Symposium on Synchrotron Crystallography Krynica-Czarny Potok 101, 751–759 - (2002). .
X-Ray scattering studies of charge stripes in La2-xSrxNiO4 (x=0.20-0.33). Hatton, P. D., Ghazi, M. E., Wilkins, S. B., Spencer, P. D., Mannix, D., d'Almeida T., Prabhakaran, P. & Boothroyd, A. International Journal of Modern Physics B 16 -, 1633–1640 (2002). doi: https://doi.org/10.1142/S0217979202011469.
X-ray scattering studies of charge stripes in La2-xSrxNiO4 (x=0.20-0.33). Hatton, P. D., Ghazi, M. E., Wilkins, S. B., Spencer, P. D., Mannix, D., d'Almeida T., Prabhakaran, P., Boothroyd, A. & Cheong, S. W. 6. Patras University Euroconference on Properties of Condensed Matter Probed with X-Ray Scattering - Electron Correlations and Magnetism - 318, 289–294 (2002). doi: https://doi.org/10.1016/S0921-4526(02)00791-3.
Charge and orbital order in the electron doped magnagnite (Bi,Ca)MnO3. Hatton, P. D., Wilkins, S. B., Spencer, P. D., Mannix, D., Brown, S. D., d'Almeida T. & Cheong, S. W. International Journal of Modern Physics B 16, 1661–1666 (2002). doi: https://doi.org/10.1142/S0217979202011470.
Short-range order in undercooled Co melts. Holland-Moritz, D., Schenk, T., Bellissent, R., Simonet, V., Funakoshi, K. I., Merino, J. M., Buslaps, T. & Reutzel, S. Journal of Non-Crystalline Solids 312-314, 47–51 (2002). doi: https://doi.org/10.1016/S0022-3093(02)01648-4.
Magnetic properties of ferromagnetic nanowires embedded in nanoporous alumina membranes. Kröll, M., Blau, W. J., Grandjean, D., Benfield, R. E., Luis, F., Paulus, P. M. & De Jongh, L. J. International Workshop on Magnetic Wires (IWMW) - 249, 241–245 (2002). doi: https://doi.org/10.1016/S0304-8853(02)00537-1.
In-situ analysis of microstress and texture development during tensile deformation of MMCs at room temperature and at elevated temperatures using synchrotron radiation. Pyzalla, A., Reetz, B., Wegener, J., Jacques, A., Ferry, O., Feiereisen, J. P. & Buslaps, T. 6th European Conference on Residual Stresses (ECRS6) - 404-407, 535–540 (2002). .
Observation of a new Co-F compound detected by very-high-energy X-ray diffraction during thermal decomposition of CoF3. Rau, J. V., Albertini, V. R., Chilingarov, N. S., Colonna, S. & di Michiel, M. Chemistry Letters , 664–665 (2002). doi: https://doi.org/10.1246/cl.2002.664.
Orientierungsordnung in flüssigkeiten. Reichert, H. Physik Journal 1 -, 83–87 (2002). .
Diamond Refractive Lens for X-ray Focusing. Snigirev, A., Snigireva, I., Kuznetsov, S., Drakopoulos, M., Di Michiel, M., Dolbnya, I., Shabel'nikov, L., Yunkin, V., Ralchenko, V., Sychov, I., Hoffmann, M. & Voges, E. Acta Crystallographica A-foundation and Advances 58, C167–C167 (2002). doi: https://doi.org/10.1107/S0108767302091699.
Diamond refractive lens for hard X-ray focusing.. Snigirev, A., Yunkin, V., Snigireva, I., Di Michiel, M., Drakopoulos, M., Kouznetsov, S., Shabel'nikov, L., Grigoriev, M., Ralchenko, V., Sychov, I., Hoffmann, M. & Voges, E. Design and Microfabrication of Novel X-ray Optics 4783, 1–9 (2002). doi: https://doi.org/10.1117/12.451011.
An X-ray refractive collimator based on planar silicon lens.. Snigireva, I., Grigoriev, M., Shabel'nikov, L., Yunkin, V., Snigirev, A., Kuznetsov, S., Di Michiel, M., Hoffmann, M. & Voges, E. Design and Microfabrication of Novel X-ray Optics 4783, 19–27 (2002). doi: https://doi.org/10.1117/12.451015.
Magnetic properties and phase transformations of bulk amorphous Fe-based alloys obtained by different techniques. Stoica, M., Degmova, J., Roth, S., Eckert, J., Grahl, H., Schultz, L., Yavari, A. R., Kvick, Å. & Heunen, G. Materials Transactions 43, 1966–1973 (2002). .
Structural studies of saccharose- and anthracene-based carbons by high energy X-ray scattering. Proceedings of the 6th International Symposium on the Characterization of Porous Solids (COPS-VI) -, Szczygielska, A., Burian, A., Duber, S., Dore, J. C. & Honkimäki, V., in ed. Rodríguez-Reinoso, F., McEnaney, B., Rouquerol, J. & Unger, K. K., 561–568. (2002). .
Spin-polarized electron momentum density distributions REMn2Ge2 (RE = Gd, La). Taylor, J. W., Duffy, J. A., Bebb, A. M., Cooper, M. J., Lees, M. R., Majumdar, S., McCarthy, J. E., Timms, D. N., Detlefs, C. & Canfield, P. C. 6. Patras University Euroconference on Properties of Condensed Matter Probed with X-Ray Scattering - Electron Correlations and Magnetism - 318, 267–271 (2002). doi: https://doi.org/10.1016/S0921-4526(02)00786-X.
Spin-polarized electron momentum density distributions in the Invar system Fe3Pt. Taylor, J. W., Duffy, J. A., Bebb, A. M., McCarthy, J. E., Lees, M. R., Cooper, M. J. & Timms, D. N. Physical Review B 65, 224408–1-224408–8 (2002). doi: https://doi.org/10.1103/PhysRevB.65.224408.
Spin-polarized electron momentum density distributions in Pd1-xCox alloys. Taylor, J. W., Duffy, J. A., Poulter, J., Bebb, A. M., Cooper, M. J., McCarthy, J. E., Timms, D. N., Staunton, J. B., Itoh, F., Sakurai, H. & Ahuja, B. L. Physical Review B 65, 024442–1-024442–7 (2002). doi: https://doi.org/10.1103/PhysRevB.65.024442.
Charge and orbital order in the electron doped magnanite (Bi,Ca)MnO3. Wilkins, S. B., Spencer, P. D., Hatton, P. D., Mannix, D., Brown, S. D., d'Almeida T. & Cheong, S. W. 6. Patras University Euroconference on Properties of Condensed Matter Probed with X-Ray Scattering - Electron Correlations and Magnetism - 318, 295–299 (2002). doi: https://doi.org/10.1016/S0921-4526(02)00792-5.
Residual strain measurement by synchrotron diffraction. Withers, P. J., Preuss, M., Webster, P. J., Hugues, D. J. & Korsunsky, A. M. 6. European Conference on Residual Stresses (ECRS6) - 404-407, 1–12 (2002). .
Study of models for ray-tracing simulations of thermal neutron monochromators. Alianelli, L., del Río M., S. & Felici, R., in 135–144. (2001). .
Texture and crystallite microstrain development during tensile deformation of copper - simulation and comparison to experimental results. Aris, S., Martins, R. V., Wegener, J., Honkimäki, V. & Pyzalla, A. 4. European Mechanics of Materials Conference on Processes, Microstructures and Mechanical Properties (EUROMECH-MECAMAT'2000) - 11, Pr4–61-Pr4–68 (2001). .
Non-destructive analysis of a bulky sample from a natural fossil reactor. Baechler, S., Materna, T., Jolie, J., Cauwels, P., Crittin, M., Honkimäki, V., Johner, H. U., Masschaele, B., Mondelaers, W., Kern, J. & Piboule, M. Journal of Radioanalytical and Nuclear Chemistry 250, 39–45 (2001). doi: https://doi.org/10.1023/A:1013255912430.
Three-dimensional electron momentum densities of solids. Bell, F. & Schneider, J. R. Journal of Physics Condensed Matter 13, 7905–7922 (2001). doi: https://doi.org/10.1088/0953-8984/13/34/327.
Electron momentum density distribution in colbalt disilicide: Analysis by the maximum entropy method. Bellin, C., Dobrzynski, L., Kouba, H., Loupias, G., Buslaps, T. & Honkimäki, V. Zeitschrift für Physikalische Chemie 215, 1367–1387 (2001). .
Analysis of porous features in zirconia based inert matrix, impact on the material qualification. Degueldre, C., Pouchon, M., Streit, M., Zaharko, O. & Di Michiel, M. Progress in Nuclear Energy 38, 241–246 (2001). doi: https://doi.org/10.1016/S0149-1970(00)00108-6.
Planar parabolic lenses for focusing high energy X-rays. Grigoriev, M., Shabel'nikov, L., Yunkin, V., Snigirev, A. A., Snigireva, I. I., Di Michiel, M., Kuznetsov, S., Hoffmann, M. & Voges, E., in 185–192. (2001). doi: https://doi.org/10.1117/12.448494.
Orbital and spin magnetism in US-comparison with USe and UTe. Kernavanois, N., de Réotier P., D., Yaouanc, A., Sanchez, J. P., Honkimäki, V., Tschentscher, T., McCarthy, J. & Vogt, O. Journal of Physics Condensed Matter 13, 9677–9690 (2001). doi: https://doi.org/10.1088/0953-8984/13/43/301.
X-ray magnetic circular dichroism and Compton scattering: Application to 5f electron systems. Kernavanois, N., Sanchez, J. P., de Réotier P., D. & Yaouanc, A. 36. Zakopane School of Physics - 100, 629–645 (2001). .
Characterization of spatial correlations in carbon nanotubes-modelling studies. Koloczek, J., Kwon, Y. K. & Burian, A. 5. International School and Symposium on Synchrotron Radiation in Natural Science - 328, 222–225 (2001). doi: https://doi.org/10.1016/S0925-8388(01)01298-1.
Etude de l'évolution microstructurale de poudres métalliques en cours de frittage par microtomographie. Lame, O., Bellet, D., Di Michiel, M. & Bouvard, D. Journées d'Automne 2001 - , 185 (2001). .
Mesoscale structural characterization within bulk materials by high-energy X-ray microdiffraction. Lienert, U., Poulsen, H. F. & Kvick, Å. AIAA Journal 39, 919–923 (2001). .
Element sensitive X-ray micro tomography for determination of the metal diffusion in teeth with amalgam fillings. Masschaele, B., Baechler, S., Cauwels, P., Cloetens, P., Dierick, M., Jolie, J. & Mondelaers, W. Radiation Physics and Chemistry 61, 625–626 (2001). doi: https://doi.org/10.1016/S0969-806X(01)00411-X.
Cold neutron and monochromatic X-ray micro-tomography. 16. International Conference on Application of Accelerators in research and Industry -, Masschaele, B., Baechler, S., Cauwels, P., Jolie, J., Mondelaers, W. & Dierick, M., in 1095–1098. (2001). doi: https://doi.org/10.1063/1.1395496.
A 1000°C furnace for in situ X-ray diffraction. Puig-Molina, A., Gorges, B. & Graafsma, H. Journal of Applied Crystallography 34, 677–678 (2001). .
In-situ analysis of the microstrains during tensile deformation of an AlSi-MMC at room temperature and elevated temperature. Pyzalla, A., Jacques, A., Feiereisen, J. P., Buslaps, T., d'Almeida T. & Liss, K. D. 1. Conference on Stress Evaluatioon with Neutrons and Synchrotron Radiation - 9, 435–442 (2001). .
In situ studies of electrodic materials in Li-ion cells upon cycling performed by very-high-energy X-ray diffraction. Rossi Albertini, V., Perfetti, P., Ronci, F., Reale, P. & Scrosati, B. Applied Physics Letters 79, 27–29 (2001). doi: https://doi.org/10.1063/1.1383058.
The evolution of the lattice parameter mismatch of nickel based superalloy: An in situ study during creep deformation. Royer, A., Jacques, A., Bastie, P. & Véron, M. Materials Science and Engineering A 319-321, 800–804 (2001). doi: https://doi.org/10.1016/S0921-5093(01)01036-X.
Simultaneous determination of the electronic and chemical structures in CeNixCu5-x at high pressures. Staub, U., Schulze-Briese, C., Alekseev, P. A., Hanfland, M., Pascarelli, S., Honkimäki, V. & Chistyakov, O. D. Journal of Physics Condensed Matter 13, 11511–11519 (2001). doi: https://doi.org/10.1088/0953-8984/13/50/310.
Temperature influence on the valence Compton profiles of aluminum and lithium. Sternemann, C., Buslaps, T., Shukla, A., Suortti, P., Döring, G. & Schülke, W. Physical Review B 63, 094301–1-094301–5 (2001). doi: https://doi.org/10.1103/PhysRevB.63.094301.
Radial distribution function analysis of the graphitization process in carbon materials. Szczygielska, A., Burian, A., Duber, S., Dore, J. C. & Honkimäki, V. 5. International School and Symposium on Synchrotron Radiation in Natural Science - 328, 231–236 (2001). doi: https://doi.org/10.1016/S0925-8388(01)01694-2.
Magnetic Compton scattering study of the ferromagnetic amorphous alloys Fe1-xBx. Taylor, J. W., Duffy, J. A., Bebb, A. M., Cooper, M. J., Dugdale, S. B., McCarthy, J. E., Timms, D. N., Greig, D. & Xu, Y. B. Physical Review B 63, 220404–1-220404–4 (2001). doi: https://doi.org/10.1103/PhysRevB.63.220404.
Temperature dependence of structural quantum effects in liquid methanol. Tomberli, B., Benmore, C. J., Egelstaff, P. A., Neuefeind, J. & Honkimäki, V. Europhysics Letters 55, 341–347 (2001). doi: https://doi.org/10.1209/epl/i2001-00421-1.
Isotopic quantum effects in the structure of liquid methanol: I.Experiments with high-energy photon diffraction. Tomberli, B., Egelstaff, P. A., Benmore, C. J. & Neuefeind, J. Journal of Physics Condensed Matter 13, 11405–11420 (2001). doi: https://doi.org/10.1088/0953-8984/13/50/301.
Residual stresses: Measurement by diffraction. Encyclopedia of Materials : Science and Technology, Withers, P. J., in 8158–8170. (2001). doi: https://doi.org/10.1016/B0-08-043152-6/01463-7.
Neutron and synchrotron X-ray strain scanning. Withers, P. J. & Webster, P. J. Strain 37 -, 19–33 (2001). .
Simulation of texture and crystallite microstrain development during compression and tension of an Al alloy and comparison to experimental results. Aris, S., Martins, R. V., Honkimäki, V. & Pyzalla, A. Computational Materials Science 19, 116–122 (2000). .
Non-destructive analysis of a bulky sample from a natural fossil reactor. 10. International Symposium on Capture Gamma-Ray Spectroscopy and Related Topics -, Baechler, S., Materna, T., Jolie, J., Cauwels, P., Crittin, M., Honkimäki, V., Johner, H., Kern, J., Masschaele, B., Mondelaers, W. & Piboule, M., in 734–736. (2000). doi: https://doi.org/10.1063/1.1361469.
Hard X-ray characterization of HEFT single reflection prototype. X-Ray Optics, Instruments, and Missions III -, Christensen, F. E., Craig, W. W., Hailey, C. J., Jimenez-Garate, M. A., Harrison, F. A., Mao, P. H., Ziegler, E., Honkimäki, V., del Río M., S., Freund, A. K. & Ohler, M., in 626–638. (2000). doi: https://doi.org/10.1117/12.391602.
Measured reflectance of graded multilayer mirrors designed for astronomical hard X-ray telescopes. Christensen, F. E., Craig, W. W., Windt, D. L., Jimenez-Garate, M. A., Hailey, C. J., Harrison, F. A., Mao, P. H., Chakan, J. M., Ziegler, E. & Honkimäki, V. Nuclear Instruments and Methods in Physics Research A 451, 572–581 (2000). doi: https://doi.org/10.1016/S0168-9002(00)00332-6.
Spin densities studied in momentum space. Cooper, M. J. & Duffy, J. A. International Workshop on Inelastic X-ray Scattering - 61, 345–352 (2000). doi: https://doi.org/10.1016/S0022-3697(99)00314-5.
Development of thermally formed glass optics for astronomical hard X-ray telescopes. Craig, W. W., Hailey, C. J., Jimenez-Garate, M. A., Windt, D. L., Harrison, F. A., Mao, P. H., Christensen, F. E. & Hussain, A. M. Optics Express 7, 178–185 (2000). .
Microstructural investigations and residual stress analysis of ZrO2/Ni functionally graded materials. Metal Matrix Composites and Metallic Foams, Dantz, D., Genzel, C. & Reimers, W., in ed. Clyne, T. W. & Simancik, F., 157–162. (2000). doi: https://doi.org/10.1002/3527606203.ch28.
Induced spin polarization in ferromagnetic Gd62.4Y37.6. Duffy, J. A., Dugdale, S. B., McCarthy, J. E., Alam, M. A., Cooper, M. J., Palmer, S. B. & Jarlborg, T. Physical Review B 61, 14331–14334 (2000). doi: https://doi.org/10.1103/PhysRevB.61.14331.
Phase formation and texture development in Ag-sheathed Bi,Pb(2223) tapes studied by different in-situ and ex-situ diffraction techniques. Giannini, E., Bellingeri, E., Marti, F., Dhallé, M., Honkimäki, V. & Flükiger, R. International Journal of Modern Physics B 14, 2688–2693 (2000). doi: https://doi.org/10.1142/S0217979200002788.
Free electron gas under high pressure. Hämäläinen, K., Huotari, S., Laukkanen, J., Soininen, A., Manninen, S., Kao, C. C., Buslaps, T. & Mezouar, M. Physical Review B 62, R735-R738 (2000). doi: https://doi.org/10.1103/PhysRevB.62.R735.
High-pressure Compton scattering. International Conference on High Pressure Science and Technology (AIRAPT-17) -, Huotari, S., Hämäläinen, K., Laukkanen, J., Soininen, A., Manninen, S., Kao, C. C., Buslaps, T., Mezouar, M. & Mao, H. K., in ed. Manghnani, M. H., Nellis, W. J. & Nicol, M. F., 1017–1020. (2000). .
Recrystallization in 3D. 21. Riso International Symposium on Materials Science: Recrystallization - Fundamental Aspects and Relations to Deformation Microstructure -, Jensen, D. J. & Poulsen, H. F., in ed. Hansen, N., Huang, X., Jensen, D. J., Lauridsen, E. M., Leffers, T., Pantleon, W., Sabin, T. J. & Wert, J. A., 103–124. (2000). .
Momentum density of electrons in CsRb2C60, versus temperature. Marangolo, M., Loupias, G., Rabii, S., Erwin, S. C., Hérold, C., Marêché, J. F., Lagrange, P., Buslaps, T. & Suortti, P. Molecular Crystals and Liquid Crystals 339, 217–221 (2000). .
4f spin density in the reentrant ferromagnet SmMn2Ge2. McCarthy, J. E., Duffy, J. A., Detlefs, C., Cooper, M. J. & Canfield, P. C. Physical Review B 62, R6073-R6076 (2000). doi: https://doi.org/10.1103/PhysRevB.62.R6073.
A conical slit for three-dimensional XRD mapping. Nielsen, S. F., Wolf, A., Poulsen, H. F., Ohler, M., Lienert, U. & Owen, R. A. Journal of Synchrotron Radiation 7, 103–109 (2000). .
Methods and feasibility of residual stress analysis by high-energy synchrotron radiation in transmission geometry using a white beam. Pyzalla, A. Journal of Nondestructive Evaluation 19 -, 21–31 (2000). doi: https://doi.org/10.1023/A:1006664007726.
A comparison of neutron and high energy synchrotron radiation as tools for texture and stress analysis. Pyzalla, A., Reimers, W. & Liss, K. D. 5th European Conference on Residual Stresses - 347-349, 34–39 (2000). .
Influence of extrusion parameters on microstructure and texture of AlSi25Cu4Mg1. Pyzalla, A., Wegener, J., Mueller, K. B. & Liss, K. D. 7th International Conference on Aluminum Alloys (ICAA7) - 331-337, 781–786 (2000). .
Microstructure, texture and residual stresses of hot-extruded AlSi-alloys. Metal Matrix Composites and Metallic Foams, Volume 5, Pyzalla, A., Wegener, J., Müller, K. B. & Liss, K. D., in ed. Clyne, T. W. & Simancik, F., 96–102. (2000). doi: https://doi.org/10.1002/3527606203.ch18.
Electric-field-induced structural changes in deuterated potassium dihydrogen phosphate. van Reeuwijk S.J., Puig-Molina, A. & Graafsma, H. Physical Review B 62, 6192–6197 (2000). doi: https://doi.org/10.1103/PhysRevB.62.6192.
Electric-field-induced structural changes measured with a CDD-coupled X-ray image intensifier. van Reeuwijk S.J., Vonk, V., Puig-Molina, A. & Graafsma, H. Journal of Applied Crystallography 33, 1422–1429 (2000). .
Observation of five-fold local symmetry in liquid lead. Reichert, H., Klein, O., Dosch, H., Denk, M., Honkimäki, V., Lippmann, T. & Reiter, G. Nature 408, 839–841 (2000). doi: https://doi.org/10.1038/35048537.
Desaccord parametrique des superalliages monocristallins : mesure "in situ" au cours d'une deformation fluage - rupture a haute temperature. Royer, A., Bastie, P., Véron, M. & Jacques, A. 42e Colloque de Metallurgie de l'INSTN. Materiaux pour les Machines Thermiques - 10, Pr4–241 - Pr4–246 (2000). .
Tissue lesions caused by microplanar beams of synchrotron-generated X-rays in Drosophila melanogaster. Schweizer, P. M., Spanne, P., Di Michiel, M., Jauch, U., Blattmann, H. & Laissue, J. A. International Journal of Radiation Biology 76, 567–574 (2000). doi: https://doi.org/10.1080/095530000138583.
Radial distribution function analysis of carbon nanotubes. Szczygielska, A., Jablonska, A., Burian, A., Dore, J. C., Honkimäki, V. & Nagy, J. B. Acta Physica Polonica A 98, 611–617 (2000). .
Isotopic quantum effects in water structure measured with high energy photon diffraction. Tomberli, B., Benmore, C. J., Egelstaff, P. A., Neuefeind, J. & Honkimäki, V. Journal of Physics Condensed Matter 12, 2597–2612 (2000). doi: https://doi.org/10.1088/0953-8984/12/12/303.
High-resolution high energy X-ray diffraction studies of charge ordering in CMR manganites and nickelates. Wilkins, S. B., Hatton, P. D., Liss, K. D., Ohler, M., Katsufuji, T. & Cheong, S. W. International Journal of Modern Physics B 14, 3753–3758 (2000). doi: https://doi.org/10.1142/S0217979200004301.
Growth, structure, and performance of depth-graded W/Si multilayers for hard X-ray optics. Windt, D. L., Christensen, F. E., Craig, W. W., Hailey, C., Harrison, F. A., Jimenez-Garate, M., Kalyanaraman, R. & Mao, P. H. Journal of Applied Physics 88, 460–470 (2000). doi: https://doi.org/10.1063/1.373681.
Spin-dependent electron momentum density in Fe3Si and Fe3Al. Zukowski, E., Andrejczuk, A., Dobrzynski, L., Kaprzyk, S., Cooper, M. J., Duffy, J. A. & Timms, D. N. Journal of Physics Condensed Matter 12, 7229–7241 (2000). doi: https://doi.org/10.1088/0953-8984/12/32/307.
X-ray analysis of residual stresses in C/SiC composites. Broda, M., Pyzalla, A. & Reimers, W. Applied Composite Materials 6 -, 51–66 (1999). doi: https://doi.org/10.1023/A:1008885319105.
Defect depth profiling of CdZnTe using high-energy diffraction measurements. Hard X-Ray, Gamma-Ray, and Neutron Detector Physics -, Goorsky, M. S., Yoon, H., Ohler, M. & Liss, K. D., in 108–114. (1999). doi: https://doi.org/10.1117/12.366574.
X-ray scatter measurements from thermally slumped thin glass substrates for the HEFT hard X-ray telescopes. X-Ray Optics, Instruments, and Missions II -, Hussain, A. M., Christensen, F. E., Jimenez-Garate, M. A., Craig, W. W., Hailey, C. J., Decker, T. R., Stern, M., Windt, D. L., Mao, P. H., Harrison, F. A., Pareschi, G., del Río M., S., Souvorov, A., Freund, A. K., Tucoulou, R., Madsen, A. & Mammen, C., in 184–197. (1999). .
Heavy element sensitive tomography using Synchrotron Radiation above 100 KEV. Speciation, Techniques and Facilities for Radioactive Materials at Synchrotron Light Sources - Actinide-XAS-98 -, Jolie, J., Materna, T., Masschaele, B., Mondelaers, W., Honkimäki, V., Koch, A. & Tschentscher, T., in 249–255. (1999). .
Investigation of the crystal structure of URu2Si2 by high-resolution X-ray diffraction. Kernavanois, N., de Réotier P., D., Yaouanc, A., Sanchez, J. P., Liss, K. D. & Lejay, P. International Conference on Strongly Correlated Electron Systems - SCES '98 - 259-261, 648–649 (1999). .
Heavy element sensitive tomographies using synchrotron radiation. Applications of Accelerators in Research and Industry, Materna, T., Jolie, J., Mondelaers, W., Masschaele, B., Honkimäki, V., Koch, A. & Tschentscher, T., in 615–617 -. (1999). .
Uranium-sensitive tomography with synchrotron radiation. Materna, T., Jolie, J., Mondelaers, W., Masschaele, B., Honkimäki, V., Koch, A. & Tschentscher, T. Journal of Synchrotron Radiation 6, 1059–1064 (1999). .
Influence of alloying on the electron momentum density in the Cu-Ni system. Metz, C., Tschentscher, T., Sattler, T., Hoeppner, K., Schneider, J. R., Wittmaack, K., Frischke, D. & Bell, F. Physical Review B 60, 14049–14056 (1999). doi: https://doi.org/10.1103/PhysRevB.60.14049.
Three-dimensional electron momentum densities of graphite and fullerene: A comparison. Metz, C., Tschentscher, T., Suortti, P., Kheifets, A. S., Lun, D. R., Sattler, T., Schneider, J. R. & Bell, F. Journal of Physics Condensed Matter 11, 3933–3942 (1999). doi: https://doi.org/10.1088/0953-8984/11/19/312.
Three-dimensional electron momentum density of aluminum by (gamma, e gamma) spectroscopy. Metz, C., Tschentscher, T., Suortti, P., Kheifets, A. S., Lun, D. R., Sattler, T., Schneider, J. R. & Bell, F. Physical Review B 59, 10512–10520 (1999). doi: https://doi.org/10.1103/PhysRevB.59.10512.
Hercules 1999 Tutorials X-ray optics. in [Formatter not found: BookTitle] ESRF, Ohler, M. (1999). , .
Microstructure, texture and residual stresses after cold extrusion-application of white high energy synchrotron radiation. 20. Risø International Symposium on Materials Science -, Pyzalla, A., Reimers, W., Royer, A. & Liss, K. D., in ed. Bilde-Sorensen, J. B., Carstensen, J. V., Hansen, N., Jensen, D. J., Leffers, T., Pantleon, W., Pedersen, O. B. & Winther, G., 453–458. (1999). .
The use of high-energy synchrotron diffraction for residual stress analyses. Reimers, W., Pyzalla, A., Broda, M., Brusch, G., Dantz, D., Schmackers, T., Liss, K. D. & Tschentscher, T. Journal of Materials Science Letters 18 -, 581–583 (1999). doi: https://doi.org/10.1023/A:1006651217517.
Temperature dependence of the structural order in the gama' phase of nickel base superalloy. Royer, A., Bastie, P. & Véron, M. Scripta Materialia 40 -, 955–961 (1999). doi: https://doi.org/10.1016/S1359-6462(99)00049-4.
Cross-section ratio of double to single ionization of helium by Compton scattering of 40-100 Ke V X rays. Spielberger, L., Braeuning, H., Muthig, A., Tang, J. Z., Wang, J., Qiu, Y., Doerner, R., Jagutzki, O., Tschentscher, T., Honkimäki, V., Mergel, V., Achler, M., Weber, T., Khayyat, K., Burgdoerfer, J., McGuire, J. H. & Schmidt-Boecking, H. Physical Review A 59, 371–379 (1999). doi: https://doi.org/10.1103/PhysRevA.59.371.
A triple-crystal diffractometer for high-energy synchrotron radiationat the HASYLAB high-field wiggler beamline BW5. Bouchard, R., Hupfeld, D., Lippmann, T., Neuefeind, J., Neumann, H. B., Poulsen, H. F., Rütt, U., Schmidt, T., Schneider, J. R., Süssenbach, J. & von Zimmermann M. Journal of Synchrotron Radiation 5, 90–101 (1998). doi: https://doi.org/10.1107/S090904959701457X.
A novel fast switching linear/helical undulator. 6. European Particle Accelerator Conference -, Chavanne, J., Elleaume, P. & Van Vaerenbergh, P., in ed. Myers, S., Liljeby, L., Petit-Jean-Genaz, C., Poole, J. & Rensfelt, K. G., 317–319. (1998). .
Development of a laser-triggered ultrafast streak camera for time-resolved X-ray diffraction. Time Structure of X-Ray Sources and its Applications -, Côté, C. Y., Kaplan, D., Bouvier, M., Kieffer, C., Mourou, G., Naylor, G., Scheidt, K. & Craig, D., in 164–169. (1998). doi: https://doi.org/10.1117/12.331838.
Spin density in Gd studied by magnetic Compton scattering. Duffy, J. A., McCarthy, J. E., Dugdale, S. B., Honkimäki, V., Cooper, M. J., Alam, M. A., Jarlborg, T. & Palmer, S. B. Journal of Physics Condensed Matter 10, 10391–10398 (1998). doi: https://doi.org/10.1088/0953-8984/10/46/006.
The investigation of ultrasonic fields by time resolved X-ray diffraction. Liss, K. D., Magerl, A., Hock, R., Waibel, B. & Remhof, A. Time Structure of X-ray Sources and Its Applications 3451, 117–127 (1998). doi: https://doi.org/10.1117/12.331833.
The investigation of ultrasonic fields by time resolved X-ray diffraction. Time Structure of X-Ray Sources and its Applications -, Liss, K. D., Magerl, A., Hock, R., Waibel, B. & Remhof, A., in 117–127. (1998). .
On high-resolution reciprocal-space mapping with a triple-crystal diffractometer for high-energy x-rays. Liss, K. D., Royer, A., Tschentscher, T., Suortti, P. & Williams, A. P. Journal of Synchrotron Radiation 5, 82–89 (1998). .
Spin density in ferromagnetic nickel: A magnetic compton scattering study. M.A.G., D., Duffy, J. A., Gardelis, S., McCarthy, J. E., Cooper, M. J., Dugdale, S. B., Jarlborg, T. & Timms, D. N. Journal of Physics Condensed Matter 10, 2759–2771 (1998). doi: https://doi.org/10.1088/0953-8984/10/12/014.
Evaluation of residual stresses in the bulk of materials by high energy synchrotron diffraction. Reimers, W., Broda, M., Brusch, G., Dantz, D., Liss, K. D., Pyzalla, A., Schmackers, T. & Tschentscher, T. Journal of Nondestructive Evaluation 17 -, 129–139 (1998). .
In situ determination of gamma' phase volume fraction and of relations between lattice parameters and precipitate morphology in Ni-based single crystal superalloy. Royer, A., Bastie, P. & Véron, M. Acta Materialia 46, 5357–5368 (1998). doi: https://doi.org/10.1016/S1359-6454(98)00206-7.
Experiments with very high energy synchrotron radiation. Tschentscher, T. & Suortti, P. 6. International Conference on Synchrotron Radiation Instrumentation SRI'97 - 5, 286–292 (1998). .
CeRh3B2: A ferromagnet with anomalously large Ce 5d spin and orbital magnetic moments. Yaouanc, A., de Réotier P., D., Sanchez, J. P., Tschentscher, T. & Lejay, P. Physical Review B 57 -, R681-R684 (1998). .
3D electron momentum densities : A comparison of (gamma, egamma) and (e, 2e) spectroscopy. 14. International Conference on Application of Accelerators in Research and Industry -, Kurp, F. F., Vos, M., Tschentscher, T., Kheifets, A. S., Schneider, J. R., Weigold, E. & Bell, F., in 757–760. (1997). .
Three-dimensional electron momentum densities:A comparison of (gamma ,e gamma) and (e,2e) spectroscopies. Kurp, F. F., Vos, M., Tschentscher, T., Kheifets, A. S., Schneider, J. R., Weigold, E. & Bell, F. Physical Review B 55, 5540–5547 (1997). doi: https://doi.org/10.1103/PhysRevB.55.5440.
3D electron momentum densities of solids. 17. International Conference on X-Ray and Inner-Shell Processes -, Kurp, F. F., Vos, M., Tschentscher, T., Kheifets, A. S., Schulte-Schrepping, H., Schneider, J. R., Weigold, E. & Bell, F., in 369–381. (1997). .
Electron momentum density of graphite from (gamma, egamma) spectroscopy. Kurp, F. F., Werner, A. E., Schneider, J. R., Tschentscher, T., Suortti, P. & Bell, F. Nuclear Instruments and Methods in Physics Research B 122, 269–273 (1997). doi: https://doi.org/10.1016/S0168-583X(96)00828-2.
Towards a new (Q,t) regime by time-resolved x-ray diffraction: ultra-sound excited crystals as an example. Liss, K. D., Magerl, A., Hock, R., Remhof, A. & Waibel, B. Europhysics Letters 40, 369–374 (1997). doi: https://doi.org/10.1209/epl/i1997-00473-7.
Ultrasound-induced gradient crystals observed by high-energy x-rays. Liss, K. D., Magerl, A., Remhof, A. & Hock, R. Acta Crystallographica A 53, 181–186 (1997). doi: https://doi.org/10.1107/S010876739601327X.
The cross-section for magnetic Compton scattering up to 1MeV. McCarthy, J. E., Cooper, M. J., Honkimäki, V., Tschentscher, T., Suortti, P., Gardelis, S., Hämäläinen, K., Manninen, S. & Timms, D. N. Nuclear Instruments and Methods in Physics Research A 401, 463–475 (1997). .
High-energy magnetic Compton scattering from iron. McCarthy, J. E., Cooper, M. J., Lawson, P. K., Timms, D. N., Manninen, S., Hämäläinen, K. & Suortti, P. Journal of Synchrotron Radiation 4, 102–109 (1997). doi: https://doi.org/10.1107/S0909049596015002.
A non-destructive technique for the microstructural investigation of nickel base single crystal superalloys: high resolution diffraction of high energy synchrotron radiation. Royer, A. & Bastie, P. Scripta Materialia 36 -, 1151–1159 (1997).
High energy X-ray diffraction measurement of the superstructure reflection (100) for a creep deformed AM1 single crystal superalloy specimen. Royer, A., Bastie, P. & Véron, M. Scripta Materialia 37 -, 1199–1205 (1997).
Temperature dependence of superstructure and fundamental reflections: study of a creep deformed single crystal nickel base superalloy AM1. Royer, A., Bastie, P. & Véron, M. Materials Science and Engineering A 234-236 -, 1110–1113 (1997).
The non-resonant magnetic x-ray scattering cross-section for photon energies up to 500 keV. Strempfer, J., Brückel, T., Hupfeld, D., Schneider, J. R., Liss, K. D. & Tschentscher, T. Europhysics Letters 40, 569–574 (1997). doi: https://doi.org/10.1209/epl/i1997-00546-1.
Neutron and high energy x-ray scattering from Si crystals excited with longitudinal high frequency sound. Hock, R., Liss, K. D., Remhof, A. & Magerl, A. 4. Jahrestagung der Deutschen Gesellschaft fuer Kristallographie - 11, 172 (1996).
3D-electron momentum density of graphite. Kurp, F. F., Tschentscher, T., Schulte-Schrepping, H., Schneider, J. R. & Bell, F. Europhysics Letters 35, 61–66 (1996). doi: https://doi.org/10.1209/epl/i1996-00531-8.
Fermi surface of Sn0.8In0.2 by compton scattering. Manuel, A. A., Vasumathi, D., Shukla, A., Suortti, P., Rumiantsev, A. Y. & Ivanov, A. S. Helvetica Physica Acta 69 -, 33–34 (1996).
Phase-contrast computed microtomography with 50 keV synchrotron x-rays. Raven, C., Snigirev, A. A., Snigireva, I. I., Spanne, P. & Suvorov, A. SRI'95 - 67, 3359–1-3359–3 (1996).
Focusing of high energy x-rays by bent crystal optics. Schulze, C. & Lienert, U. ESRF Newsletter 25 -, 38–40 (1996).
High energy X-ray scattering experiments. Tschentscher, T., Buslaps, T., Fajardo, P., Honkimäki, V., Kretzschmer, M., Liss, K. D., Mauro, A., McCarthy, J. E., Renier, M., Shukla, A. & Suortti, P. ESRF Newsletter 25 -, 30–33 (1996).
Optics for high energy x-ray scattering applications. Tschentscher, T. & Suortti, P. SRI'95 - 67, 3349–1-3349–9 (1996).
Non-resonant magnetic x-ray diffraction. Bateson, R. D. & Bramwell, S. T. ESRF Newsletter 22 -, 18–19 (1994).
Welcome to the ESRF's users. Buttner, H. ESRF Newsletter 19 -, 5 (1993).
The first year operation of insertion devices. Elleaume, P. ESRF Newsletter 19 -, 14–15 (1993).
Allan, P., Grey, C. & etc. , (in progress). .
Bordet & etc. , (in progress). .
The atomic level journey from amorphous alloys to nanoporous gold electrocatalysts.. Goberna-Ferron, S. & etc. , (in preparation). .
Imaging and identifying Tudor nanoparticles: Exploring the hidden chemical depths of the Mary Rose hull. Jensen, K. M. Ø., Aluri, E. R., Perez, E. S., Vaughan, G. B. M., Michel, M. D., Schofield, E. J., Billinge, S. J. L. & Corr, S. Nature , (under review). .
kardash & etc. , (in progress). .
Diffraction par rayonnement synchrotron. Rayonnement synchrotron, rayons X et neutrons au service des matériaux, Steuwer, A., in ed. Lodini, A. & Baudin, T., 201–218. (2012 -). .
Operando investigation of the lithium/sulfur battery system by coupled X-ray absorption tomography and X-ray diffraction computed tomography. Tonin, G., Vaughan, G. B. M., Bouchet, R., Alloin, F., Di Michiel, M. & Barchasz, C. Chemistry of Materials , (Submitted). .
Unraveling soft templating and disorder as design assets for applied electrocatalysts. Triana, C. A., Moré, R., Bloomfield, A. J., Petrović, P. V., Ferrón, S. G., Stanley, G., Zarić, S. D., Fox, T., Brothers, E. N., Sheehan, S. W., Anastas, P. T. & Patzke., G. R. Nature Materials , (submitted). .